Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Body Length: .496 inch;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Prism Electronics
Digiode
Andel Nordic
$1.648
$1.583
Authorized Procurement Solutions
Perfect Parts
Corphita
EMSNET (Excess)
Headers & Edge Type Connectors 560020-0300 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mating Info.:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
560020-0300 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3103F
Idec
ROTARY SWITCH;
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
61303211021
Wuerth Elektronik & Kg
61303211021 by Wurth Elektronik is a BOARD CONNECTOR with 32 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.1", it has gold (Au) - nickel (Ni) finish and operates b/w -40 to 125 °C. Ideal for commercial applications requiring high insulation resistance and UL certification.
BM04B-SRSS-TB(LF)(SN)(P)
J S T Mfg
BM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, COPPER ALLOY material, and TIN finish. It is used for surface mount applications in headers & edge type connectors. The connector has UL Flammability Code of 94V-0 and mating contact finish of TIN OVER COPPER.
(D)B3B-EH-A(LF)(SN)(P)
(D)B3B-EH-A(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 800VAC voltage withstand, and 3A signal current rating. Ideal for PCB applications requiring POLARIZED KEY, WHITE insulator color, and STRAIGHT mounting style.
DF11-16DP-2DSA(01)
Hirose Electric
DF11-16DP-2DSA(01) by Hirose Electric is a 16-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and gold finish. It is used in applications requiring a durable, high-current signal connection with UL and CSA standards compliance. The connector has a straight mounting style, black insulator color, and operates b/w -30 to 85°C temperatures.
MTCB2X-XXX-205CS061
TE Connectivity
BOARD CONNECTOR;
5-103961-9
TE Connectivity 5-103961-9 is a board connector with 10 contacts, rated at 3A signal current. It features a body length of 2", insulation resistance of 5G ohm, and dielectric voltage of 600VAC. Ideal for applications requiring a temperature range from -65 to +105°C.
BM02B-SRSS-TB(LF)(SN)
BM02B-SRSS-TB(LF)(SN) by J S T Mfg is a 2-contact BOARD CONNECTOR with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCBs, it features POLYAMIDE insulator, COPPER ALLOY contacts, and -25 to 85 °C operating range.
SHF-105-01-L-D-SM-LC
Samtec
The Samtec SHF-105-01-L-D-SM-LC is a 2-row, 10-contact board connector with Tin-Nickel finish. Featuring a terminal pitch of 1.27mm, it is designed for surface mount applications. Ideal for use in various electronic devices requiring male connectors with straight mounting style.
66506-329LF
Amphenol Communications Solutions
Amphenol's 66506-329LF is a 26-contact board connector with 2 rows, UL94V-0 flammability rating, and 2.54mm terminal pitch. Ideal for applications requiring male solder contacts in straight mounting style on boards.
2110110-1
The TE Connectivity 2110110-1 is a board connector with 180 contacts, featuring a mating contact pitch of 0.075" and insulator made of glass-filled liquid crystal polymer. It has a body length of 1.197", width of 0.909", and depth of 1.272". Ideal for applications requiring high reliability in commercial settings, such as PCB connections with rectangular patterns at temperatures ranging from -55°C to 85°C.
17211101102
Harting Electronics & Kg
17211101102 by Harting Electronics & Kg is a board connector with 110 female contacts in a right-angle mounting style. It features a mating contact pitch of 0.079", body length of 1.965", and termination contact finish of gold over nickel. Ideal for applications requiring high-density PCB connections with precise rectangular patterns and press-fit terminations.
87833-1420
Molex
Molex 87833-1420 is a 14-contact board connector with 2 rows, featuring tin finish, polyamide insulator, and phosphor bronze contacts. It operates b/w -55°C to 105°C, ideal for commercial applications requiring a reliable signal current of up to 2A. The right-angle receptacle design with locking mounting suits PCBs needing a mating contact pitch of 0.079".
52271-1079
Molex 52271-1079 is a FFC/FPC connector with 10 contacts, rated at 0.5A signal current. It features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 500VAC. Ideal for board mounting applications requiring durability, reliability, and high temperature tolerance up to 85°C.
22-23-2061
The Molex 22-23-2061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring a reliable connection with solder termination and rectangular contact pattern.
22-05-3041
The Molex 22-05-3041 is a board connector with mating contact pitch of 0.1", body length of 0.4", and body width of 0.25". It features matte tin over nickel termination, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right angle mounting solution with rectangular contact pattern on PCBs.
B2B-ZR-SM4-TFT(LF)(SN)
B2B-ZR-SM4-TFT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and TIN finish. It has a terminal pitch of 1.5mm and is used for surface mount applications in headers & edge type connectors.
DF40C-60DP-0.4V(51)
DF40C-60DP-0.4V(51) by Hirose Electric is a 2-row, 60-contact board stacking connector with gold over nickel finish. It features liquid crystal polymer insulator, 100VAC dielectric voltage, and 0.3A signal current rating. Ideal for PCB applications requiring durability, reliability, and polarization key for secure connections.
53253-0470
The Molex 53253-0470 is a board connector with a mating contact pitch of 0.079 inches and a body width of 0.144 inch. It features bright tin termination contact finish and is commonly used in commercial applications for its reliability and multiple mating parts availability.
DF19G-20S-1C(06)
DF19G-20S-1C(06) by Hirose Electric is a FFC/FPC connector with 0.039" pitch, 500M ohm insulation resistance, and 300VAC dielectric voltage. Ideal for applications requiring a durable, female socket connector with 20 contacts, UL-rated at 94V-0 flammability for temperatures ranging from -35 to 85°C.
51952-283LF
AMPHENOL ICC
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved