Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Body or Shell Style: PLUG; UL Flammability Code: 94V-0;
Median Price
$3.030
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
Andel Nordic
$5.337
$5.124
Corphita
GreenTree Electronics
Perfect Parts
Telecom & Datacom Connectors 54306-5019 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
Option:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
54306-5019 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Formosa Microsemi
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Yageo
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
65100516121
Wuerth Elektronik & Kg
65100516121 USB connector by Wurth Elektronik features a body length of 0.378", insulation resistance of 1Gohm, and dielectric voltage rating of 750VAC. Ideal for telecom applications, this right-angle receptacle has a gold finish, liquid crystal polymer insulator, and operates b/w -40 to 105°C.
1546413-3
TE Connectivity 1546413-3 is a Telecom & Datacom Connector with EMI shielding, ABS insulator, and 30u plating. It has 8 contacts, rated for 1.5A signal current, suitable for panel mounting in applications requiring reliable data transmission at temperatures ranging from -20 to 80°C.
78320-0001
Molex
Molex 78320-0001 is a telecom & datacom connector with 16 contacts, 0.05" pitch, and 1.364" body length. Ideal for board mounting in applications requiring high insulation resistance of 1000000000 ohm and operating temperatures from -40 to 105°C.
987
Keystone Electronics
Telecom and Datacom Connectors;
RJHSE-5384-A1
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
RJE73-188-00410
Amphenol
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: PHOSPHOR BRONZE; Mating Contact Finish: GOLD (50); JESD-609 Code: e3;
85513-5109
Molex 85513-5109 is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. Insulation resistance of 500MOhm and operating temperature range from -40 to +85°C make it ideal for commercial applications requiring durability up to 1250 cycles.
6339191-1
TE Connectivity 6339191-1 is a Telecom & Datacom Connector with EMI shielding, LCP insulator, and 8 contacts. It has a temperature range of -40 to 85°C and UL94V-0 flammability rating. Ideal for board mounting in telecom applications due to its durability and polarization key feature.
67490-3220
The Molex 67490-3220 is a Telecom & Datacom Connector with Tin finish contacts and Glass Filled Polyethylene insulator. Featuring 7 contacts, it is a male plug connector for surface mount applications on boards. UL Flammability Code: 94V-0 ensures safety in various electronic devices.
54601908WPLF
Amphenol's 54601908WPLF is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for board mounting in telecom applications, it features a matte tin over nickel finish, UL-rated durability of 250 cycles, and a right-angle mounting style.
61729-1011BLF
Amphenol's 61729-1011BLF is a USB connector with 4 contacts, rated at 1A signal current. It features a dielectric voltage of 750VAC and insulation resistance of 1000000000 ohm. Ideal for telecom/datacom applications, it has a durable design with a temperature range from -55 to 85°C.
MUSB-05-S-AB-SM-A
Samtec
Samtec's MUSB-05-S-AB-SM-A is a USB connector with 5 contacts, POLYAMIDE6T insulator, and PHOSPHOR BRONZE contact material. It has a durability of 1500 cycles and operates b/w -50 to 85°C. Ideal for telecom/datacom applications, it offers a right-angle mounting style with surface mount termination for reliable signal transmission.
MUSB-05-S-B-SM-A-TR
Samtec MUSB-05-S-B-SM-A-TR is a USB connector with 5 contacts, matte tin finish, and phosphor bronze material. It has a durability of 1500 cycles and operates b/w -50 to 85°C. Ideal for telecom/datacom applications due to its right-angle mounting style and surface mount termination.
1-2301994-0
TE Connectivity 1-2301994-0 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style, and solder termination. Ideal for telecom and datacom applications requiring reliable board-mounted connectors with polarization key.
USB4115-03-C
Global Connector Technology
USB4115-03-C by Global Connector Technology is a USB connector with 24 contacts, rated at 0.25A signal current. It features liquid crystal polymer insulation, matte tin over nickel termination finish, and stainless steel shell material. Ideal for telecom & datacom applications with -25 to 85°C operating temperature range.
1051640001
Molex 1051640001 USB connector with 5 contacts, gold finish, and liquid crystal polymer insulator. Ideal for telecom & datacom applications requiring surface mount board mounting in a right angle receptacle design. Stainless steel shell with matte tin finish ensures durability and reliability.
72309-8034BLF
The Amphenol Communications Solutions 72309-8034BLF is a USB connector with matte tin over nickel finish. It features a dielectric voltage of 750VAC, insulation resistance of 1Gohm, and operates b/w -55 to 85°C. Ideal for telecom & datacom applications, it offers durability up to 1500 cycles and complies with UL standards.
48037-2200
The Molex 48037-2200 USB connector features gold termination, glass-filled polyamide46 insulator, and brass contact material. Ideal for telecom & datacom applications, it offers a rated current of 1.5A, durability of 1500 cycles, and operates b/w -20 to 85°C.
1-292303-1
TE Connectivity 1-292303-1 is a USB connector with POLYETHYLENE insulator, suitable for Telecom & Datacom applications. Features SOLDERABLE RETENTION CLIPS for board mounting, TIN shell finish, and FEMALE contact gender. Operates b/w -55 to 85°C with UL 94V-0 flammability rating.
5787617-4
TE Connectivity USB connector 5787617-4 with POLYETHYLENE insulator, rated for 1A signal current. Features solderable retention clips for board mounting, UL 94V-0 flammability code. Ideal for telecom/datacom applications due to right angle mounting style and commercial reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved