Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 52610-2633 FFC/FPC connector has 26 contacts with 0.039" pitch, rated for 1A signal current. With a body length of 1.283", it operates b/w -40 to 85°C, meeting UL and CSA standards. Ideal for board mounting in commercial applications requiring high durability and low contact resistance.
Median Price
$2.606
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$1.937
100+ parts
$1.864
1k+ parts
$1.829
10k+ parts
-
Element14
$3.151
$2.994
Farnell
$3.270
$2.500
$1.980
TTI Europe
Mouser Electronics
$2.060
$1.790
PEI Genesis
Chip1Stop
$2.030
Verical
$3.598
Digiode
$1.530
Nova Conductors
Rapid Electronics
$2,518.424
VNN
NAC Semi
Sensible Micro Corp
Vyrian
IBS Electronics
$2.015
TME
$2.090
$2.040
Semicontronic
$1.030
$1.004
$0.999
Corphita
$1.449
Advanced Electronics
$1.722
$1.567
$1.412
Argo Parts USA
Netroflash
Continental Prestige Electronics
$2.270
$1.600
Andel Nordic
$3.852
$3.698
GreenTree Electronics
Assy Fe
Perfect Parts
Formix International (Excess)
The small contact pitch allows for a high density of contacts, making this connector suitable for compact electronic devices.
The length of the body provides enough space for the contacts and ensures a secure connection.
The high insulation resistance ensures minimal signal interference and reliable performance.
The connector can withstand high voltage levels, making it suitable for various applications.
The connector can operate in a wide range of temperatures, making it versatile for different environments.
With a large number of contacts, this connector can accommodate multiple signal paths or connections.
The board mounting type allows for easy installation and secure attachment to circuit boards.
The surface mount termination type simplifies the assembly process and saves space on the PCB.
Headers & Edge Type Connectors 52610-2633 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
52610-2633 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Mult Devs 16/Mar/2023
PCN Assembly/Origin - Mult Devs Location 15/Aug/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Changzhou Starsea Electronics
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Nexperia
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
Lite-on Semiconductor
5040500491
Molex
Molex 5040500491 is a BOARD CONNECTOR with 4 contacts, 0.059" pitch, and 1000000000 ohm insulation resistance. Ideal for surface mount applications in electronics with operating temperatures from -25 to 85 °C.
70543-0002
Molex 70543-0002 is a board connector with 0.1" pitch, suitable for applications requiring 3A signal current. Featuring matte tin finish, it offers high durability with 50 cycles and operates b/w -40 to 105°C temperature range. Ideal for commercial use, this connector has a polarization key and UL94V-0 flammability rating.
1-1761606-3
TE Connectivity
TE Connectivity 1-1761606-3 is a 2-row, 40-contact board connector with a mating contact pitch of 0.1". Featuring POLYBUTYLENE TEREPHTHALATE insulator material and rated for up to 1A signal current, it is ideal for commercial applications requiring reliable connections in temperatures ranging from -65°C to 105°C.
SM05B-SRSS-TB(LF)(SN)
J S T Mfg
SM05B-SRSS-TB(LF)(SN) by J S T Mfg is a 5-contact board connector with 0.039" pitch, ideal for PCB applications. Featuring TIN COPPER finish, POLYAMIDE insulator, and 500VAC dielectric voltage rating. Operating b/w -25 to 85 °C, it offers male contact gender and right-angle mounting style.
10152821-103Q000LF
Amphenol Communications Solutions
Amphenol Communications Solutions' 10152821-103Q000LF is a card edge connector with 164 contacts, gold termination finish, and glass-filled polyamide insulator. It has a mating contact pitch of 0.039", operates b/w -55 to 105°C, and offers a rated current of 1.1A. Ideal for board mounting applications requiring durability and reliable signal transmission.
VHR-2N-Y
BOARD CONNECTOR;
1-640456-2
TE Connectivity 1-640456-2 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring copper alloy contacts and glass-filled polyester insulator, it has a max operating temperature of 105°C. With a total of 12 contacts, this male plug connector is polarized and rated for 5A signal current.
50-57-9406
Molex 50-57-9406 is a board connector with 0.1" pitch, suitable for commercial applications. It features a 3A signal current rating, GLASS FILLED POLYESTER insulator, and operates b/w -40 to 105°C. Ideal for cable mounting with crimp termination, this connector has a total of 6 contacts in a polarized housing design.
B03B-PASK-1(LF)(SN)
B03B-PASK-1(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3A signal current rating, 0.079" contact pitch, and 800VAC dielectric voltage. Ideal for board mounting applications, it features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and tin over copper mating finish. Operating b/w -25 to 85 °C, this UL-rated connector offers high insulation resistance of 1000000000 ohm.
DF11-18DP-2DSA(01)
Hirose Electric
DF11-18DP-2DSA(01) by Hirose Electric is a 2-row, 18-contact board connector with gold termination finish. It offers a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring durability, reliability, and signal current rating up to 2A in commercial settings.
M50-3600542R
Harwin Plc
The Harwin PLC M50-3600542R is a 10-contact female board connector with a mating contact pitch of 0.05", ideal for PCB applications. Featuring tin finish with nickel barrier, it offers high insulation resistance of 1 Gohm and operates b/w -40°C to 105°C. With durability up to 300 cycles, this UL-rated connector is suitable for commercial use in various electronic devices.
22-05-2071
Molex 22-05-2071 is a board connector with 7 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring durable connectors with a mounting style of right angle and solder termination type.
501568-0607
The Molex 501568-0607 is a board connector with a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 350VAC. It is used in applications requiring a durable, right-angle mounting style for up to 30 cycles, ideal for commercial reliability standards.
ZHR-2
ZHR-2 by J S T Mfg is a 2-contact BOARD CONNECTOR with a mating contact pitch of 0.059". Its compact body measures 0.134" in width and 0.189" in depth, meeting UL Flammability Code 94V-0 standards. Ideal for CABLE mounting, this CRIMP termination FEMALE connector is commonly used in electronic applications requiring reliable connections.
DF40C-100DS-0.4V(57)
DF40C-100DS-0.4V(57) by Hirose Electric is a 2-row, 100-contact board stacking connector with liquid crystal polymer insulator. Featuring 0.016" mating contact pitch and 100VAC dielectric voltage, it operates b/w -35°C to 85°C. Ideal for applications requiring high durability and signal current of 0.3A, such as PCB connections in electronics industry.
SSW-108-01-S-D
Samtec
SSW-108-01-S-D by Samtec is a 2-row, 16-contact board connector with a mating contact pitch of 0.1 inch. It features a liquid crystal polymer insulator and matte tin termination contact finish. This socket-style connector is commonly used in commercial applications requiring reliable connections on printed circuit boards.
15910100
W+p Products
15910100 by W+p Products is a BOARD CONNECTOR with 10 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications requiring a right angle mounting style and solder termination.
51110-1050
Molex 51110-1050 is a 2-row board connector with 0.079" contact pitch, suitable for cable mounting. Featuring glass-filled polyester insulation, it has 10 contacts with 40 mohm resistance. Operating b/w -40°C to 105°C, it is UL-certified and polarized for commercial applications.
MTCB1X-XXX-106CS025
MEM2067-02-180-00-A
Global Connector Technology
MEM2067-02-180-00-A by Global Connector Technology is a PCB connector with 8 contacts, mating pitch of 0.04", and termination finish of TIN OVER NICKEL. It features liquid crystal polymer insulator material and is UL certified for use in various applications requiring a right angle mounting style on the board.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
52610-3072
The Molex 52610-3072 FFC/FPC connector features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 700VAC. Ideal for board mounting applications, this female connector has a total of 30 contacts, staggered PCB pattern, and surface mount termination type.
52610-1672
Molex 52610-1672 FFC/FPC connector with 16 contacts, 0.039" pitch, and 700VAC voltage withstand is ideal for board mounting applications. Featuring polyamide insulation, phosphor bronze contacts, and -40 to 85°C operating range, it offers reliable signal transmission in commercial settings. The connector's bellowed contact style ensures a durable design with a min withdrawal force of ZIF.
52610-1033
Molex 52610-1033 FFC/FPC connector features 0.039" mating contact pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for board mounting applications with a total of 10 contacts, rated at 1A signal current.
52610-1072
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Filter Feature: NO;
52610-1071
Molex 52610-1071 is a FFC/FPC connector with 0.039" pitch, suitable for PCBs with 2 rows and 10 contacts. It features Tin/Bismuth finish, Polyamide insulator, and operates b/w -40 to 85°C. Ideal for commercial applications requiring high durability and UL/CSA compliance.
52610-0833
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Filter Feature: NO;
52610-3033
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Insulator Material: POLYAMIDE;
52610-1633
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Rows Loaded: 1;
52610-2033
The Molex 52610-2033 FFC/FPC connector has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. Ideal for board mounting applications in commercial settings, this female connector offers durability with 30 cycles and a rated signal current of 1A.
52610-0672
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Mating Contact Finish: NOT SPECIFIED;
52610-2672
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Contact Pattern: RECTANGULAR;
52610-1671
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Termination Type: SURFACE MOUNT;
52610-1233
The Molex 52610-1233 is a FFC/FPC connector with 12 contacts, rated at 1A signal current. It features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability.
52610-0633
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; MIL Conformity: NO;
52610-0571
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Additional Features: ZIF; MIL Conformity: NO;
52610-0675
The Molex 52610-0675 is a FFC/FPC connector with 6 contacts, 0.039" pitch, and 100000000 ohm insulation resistance. Ideal for board mounting applications, it features TIN over nickel termination finish and polyamide insulator material. With a temperature range of -40 to 85°C, this connector offers durability with 30 cycles and reliability for commercial use.
52610-0533
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Contact Pattern: RECTANGULAR;
52610-2071
Molex 52610-2071 is a FFC/FPC connector with 20 contacts, 0.039" pitch, and 1A signal current rating. Ideal for board mounting applications, it features a polyamide insulator, 500VAC dielectric voltage withstand, and UL94V-0 flammability rating.
52610-1690
Molex 52610-1690 is a FFC/FPC connector with 16 contacts, 0.039" pitch, and 100000000 ohm insulation resistance. Ideal for PCB applications requiring a mating contact pitch of 3.7592mm, it has a temperature range of -20 to 85°C and UL flammability rating of 94V-0.
52610-2333
The Molex 52610-2333 FFC/FPC connector features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. Ideal for board mounting applications, this female connector has a total of 23 contacts and operates b/w -40°C to +85°C, meeting UL and CSA standards.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved