Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 52610-3033 FFC/FPC connector has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. It is used in board mounting applications for signal currents up to 1A, with a durability of 30 cycles.
Median Price
$2.845
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Arrow
1+ parts
$1.259
100+ parts
$1.153
1k+ parts
$1.089
10k+ parts
-
DigiKey
$2.700
$2.560
$2.320
Chip1Stop
$2.990
$2.590
$1.930
PEI Genesis
RS (Exports)
$3.241
$2.752
TTI Europe
$1.220
Heilind Electronics
Verical
$3.580
$3.290
Farnell
$3.340
$3.140
Interstate Connecting
Mouser Electronics
$2.510
$2.170
Digiode
$1.196
Nova Conductors
$2.223
Rapid Electronics
$1,862.412
IBS Electronics
$2.626
Vyrian
Rutronik
$1.210
$1.074
VNN
ComSIT Distribution GmbH
Corphita
$1.133
Argo Parts USA
Netroflash
$2.112
$2.067
Continental Prestige Electronics
$2.720
$2.000
Andel Nordic
$8.287
$7.955
Aztec Data Supply Inc.
$9.803
Kepictronics
Perfect Parts
Assy Fe
GreenTree Electronics
Infinite Electronics LLP (Excess)
Microchip USA
Futuretech Components
The small pitch allows for a high density of contacts, making this connector suitable for applications where space is limited.
The longer body length provides stability and ensures secure connections between components.
High insulation resistance prevents signal interference and ensures reliable performance in various environments.
The narrow body width helps in accommodating the connector in tight spaces without compromising on performance.
The high dielectric voltage rating ensures safe operation and protection against electrical breakdown.
The Tin/Bismuth contact finish provides a reliable connection with low contact resistance for efficient signal transmission.
The adequate body depth allows for proper contact alignment and secure attachment to the circuit board.
Polyamide insulator material offers good thermal and mechanical properties, ensuring durability and long-term performance.
The high maximum operating temperature allows for use in a wide range of temperature conditions without degradation in performance.
The low minimum operating temperature ensures the connector can withstand cold environments without issues.
The FFC/FPC connector type is suitable for flexible applications and allows for easy assembly and disassembly.
The 1A rated current for signals indicates the connector's capability to handle moderate power requirements.
The natural insulator color is visually appealing and can easily blend in with the overall design of the electronic system.
The high number of contacts allows for connectivity with multiple components, making it suitable for complex electronic systems.
With a durability of 30 cycles, the connector can withstand repetitive connections and disconnections without performance degradation.
The board mounting type offers easy installation and secure attachment to the circuit board.
The rectangular PCB contact pattern ensures proper alignment and connection with the circuit board for reliable performance.
The surface mount termination type allows for easy and secure mounting on the PCB surface, saving space and enabling automated assembly.
The female contact gender provides compatibility with male connectors, ensuring connectivity with a wide range of devices.
Low contact resistance of 20 mohm ensures efficient signal transmission and minimal power loss.
The straight mounting style offers easy alignment and installation, making it suitable for various applications.
The bellowed contact style provides mechanical robustness and ensures reliable connections even under vibration or shock conditions.
The Zero Insertion Force (ZIF) design allows for easy and gentle insertion of FFC/FPC connectors without damaging the contacts.
The locking mounting option ensures a secure and stable connection between the connector and the PCB, preventing accidental disconnection.
Rectangular contact pattern enables easy alignment and mating with corresponding connectors for enhanced reliability.
Commercial reliability standards ensure consistent performance and compatibility with a wide range of commercial electronic devices.
Headers & Edge Type Connectors 52610-3033 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
52610-3033 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Mult Devs 16/Mar/2023
PCN Assembly/Origin - Mult Devs Location 15/Aug/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
RN41N-I/RM
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
DF40C-100DS-0.4V(51)
Hirose Electric
DF40C-100DS-0.4V(51) by Hirose Electric is a 100-contact board stacking connector with 0.016" mating pitch, 50000000 ohm insulation resistance, and 100VAC dielectric voltage. Ideal for applications requiring high durability and reliability in commercial settings with -35 to 85 °C operating temperature range.
EHR-2
J S T Mfg
EHR-2 by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 3A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulation, operates b/w -25 to 85 °C, and UL94V-0 flammability rating. Ideal for CABLE mounting applications requiring high contact resistance and locking feature.
8-5353189-0
TE Connectivity
TE Connectivity 8-5353189-0 is a board stacking connector with 140 contacts, 2 rows, and 0.024" mating pitch. Ideal for commercial applications, it features a 200VAC dielectric voltage rating and polyethylene insulation material. Operating b/w -40°C to 85°C, this female connector offers durability with a 50-cycle lifespan.
MEM2067-02-180-00-A
Global Connector Technology
MEM2067-02-180-00-A by Global Connector Technology is a PCB connector with 8 contacts, mating pitch of 0.04", and termination finish of TIN OVER NICKEL. It features liquid crystal polymer insulator material and is UL certified for use in various applications requiring a right angle mounting style on the board.
45108-010030
3m Electronic Products Division
The 3M Electronic Products Division's 45108-010030 is a board connector with a mating contact pitch of 0.05", insulation resistance of 1G ohm, and dielectric voltage rating of 1250VAC. It has female contacts, operates b/w -65 to 125°C, and is suitable for commercial applications requiring reliable signal currents up to 2.5A.
66506-322LF
Amphenol Communications Solutions
Amphenol's 66506-322LF is a 16-contact, 2-row board connector with a terminal pitch of 2.54mm and UL94V-0 flammability rating. It features male contacts for solder termination and straight mounting style, ideal for headers & edge type connectors in various electronic applications.
BM04B-SRSS-G-TB(LF)(SN)
BM04B-SRSS-G-TB(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with Tin (Sn) finish. Made of copper alloy, it has UL 94V-0 flammability rating and surface mount termination. Ideal for straight board mounting applications in electronics.
50-57-9403
Molex
Molex 50-57-9403 is a board connector with 0.1" pitch, suitable for commercial applications. It features a body length of 0.299", insulation resistance of 10^10 ohm, and operating temperature range from -40 to 105°C. Ideal for use in cable mounting scenarios with crimp termination and female contact gender.
796136-1
TE Connectivity 796136-1 is a PCB connector with Liquid Crystal Polymer insulator. It has 2 contacts, rated at 7A for signal current. With right-angle mounting style and compression contact, it's ideal for applications requiring a compact design and high operating temperatures up to 100°C.
HLW12S-2C7LF
HLW12S-2C7LF by Amphenol is a 12-contact FFC/FPC connector with 0.039" mating pitch and tin finish. It is UL 94V-0 rated, suitable for board mounting with solder termination. Ideal for applications requiring straight female connectors in headers & edge type setups.
50-57-9408
The Molex 50-57-9408 is a board connector with a mating contact pitch of 0.1", insulation resistance of 10^10 ohm, and rated current of 3A. It is used in applications requiring a female connector with crimp termination, suitable for commercial reliability standards.
53261-0471
Molex 53261-0471 is a 4-contact board connector with a mating contact pitch of 0.049 inches. It has a surface mount termination type and is suitable for commercial applications. The connector has a durability of 30 cycles and can operate in temperatures ranging from -40 to 105°C.
22-29-2041
The Molex 22-29-2041 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a dielectric voltage of 1500VAC and insulation resistance of 5000000000 ohm. With a rated current of 2.5A, this connector has a red insulator color and uses matte tin over nickel termination finish.
5031821852
Molex 5031821852 PCB connector has 8 contacts with 0.043" pitch. Made of liquid crystal polymer, it withstands -25 to 85°C. Ideal for commercial applications, offering durability of 10k cycles and male contact gender.
VHR-5N
VHR-5N by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.156" pitch, 1500VAC voltage withstand, and 1000000000 ohm insulation resistance. Ideal for cable mounting applications, it features POLYAMIDE insulator material and operates b/w -25 to 85 °C.
76384-303LF
Amphenol 76384-303LF is a board connector with 0.1" pitch, suitable for commercial applications. Features include 3A signal current, -40 to 125°C operating range, and UL94V-0 flammability rating. Ideal for PCB mounting with solder termination and polarized housing design.
53048-0610
Molex 53048-0610 is a board connector with 6 contacts, featuring a mating contact pitch of 0.049" and insulation resistance of 100M ohm. Ideal for commercial applications, it has a right-angle mounting style and solder termination, operating b/w -40°C to 85°C.
TFM-110-01-S-D-RE1-WT
Samtec
Samtec TFM-110-01-S-D-RE1-WT is a 20-contact board stacking connector with 0.05" pitch, ideal for commercial applications. Features include matte tin termination, liquid crystal polymer insulator, and gold mating contact finish. With a temperature range of -55 to 125°C, it offers reliable signal transmission in various electronic devices.
DTM04-3P-E003
TE Connectivity's DTM04-3P-E003 is a 1.68"x.816"x.638" board connector with GLASS FILLED POLYAMIDE insulator, UL 94V-0 rated for 250V/7.5A signal current at -55 to 125°C. Ideal for cable mounting applications requiring polarized male contacts and strain relief option.
SM10B-SRSS-TB(LF)(SN)
SM10B-SRSS-TB(LF)(SN) by J S T Mfg is a 10-contact board connector with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCBs, it features tin over copper finish, POLYAMIDE insulator, and operates b/w -25 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
52610-3072
The Molex 52610-3072 FFC/FPC connector features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 700VAC. Ideal for board mounting applications, this female connector has a total of 30 contacts, staggered PCB pattern, and surface mount termination type.
52610-1672
Molex 52610-1672 FFC/FPC connector with 16 contacts, 0.039" pitch, and 700VAC voltage withstand is ideal for board mounting applications. Featuring polyamide insulation, phosphor bronze contacts, and -40 to 85°C operating range, it offers reliable signal transmission in commercial settings. The connector's bellowed contact style ensures a durable design with a min withdrawal force of ZIF.
52610-1033
Molex 52610-1033 FFC/FPC connector features 0.039" mating contact pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for board mounting applications with a total of 10 contacts, rated at 1A signal current.
52610-1072
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Filter Feature: NO;
52610-1071
Molex 52610-1071 is a FFC/FPC connector with 0.039" pitch, suitable for PCBs with 2 rows and 10 contacts. It features Tin/Bismuth finish, Polyamide insulator, and operates b/w -40 to 85°C. Ideal for commercial applications requiring high durability and UL/CSA compliance.
52610-0833
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Filter Feature: NO;
52610-1633
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Rows Loaded: 1;
52610-2033
The Molex 52610-2033 FFC/FPC connector has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. Ideal for board mounting applications in commercial settings, this female connector offers durability with 30 cycles and a rated signal current of 1A.
52610-0672
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Mating Contact Finish: NOT SPECIFIED;
52610-2672
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Contact Pattern: RECTANGULAR;
52610-1671
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Termination Type: SURFACE MOUNT;
52610-1233
The Molex 52610-1233 is a FFC/FPC connector with 12 contacts, rated at 1A signal current. It features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability.
52610-0633
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; MIL Conformity: NO;
52610-0571
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Additional Features: ZIF; MIL Conformity: NO;
52610-0675
The Molex 52610-0675 is a FFC/FPC connector with 6 contacts, 0.039" pitch, and 100000000 ohm insulation resistance. Ideal for board mounting applications, it features TIN over nickel termination finish and polyamide insulator material. With a temperature range of -40 to 85°C, this connector offers durability with 30 cycles and reliability for commercial use.
52610-0533
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Contact Pattern: RECTANGULAR;
52610-2071
Molex 52610-2071 is a FFC/FPC connector with 20 contacts, 0.039" pitch, and 1A signal current rating. Ideal for board mounting applications, it features a polyamide insulator, 500VAC dielectric voltage withstand, and UL94V-0 flammability rating.
52610-1690
Molex 52610-1690 is a FFC/FPC connector with 16 contacts, 0.039" pitch, and 100000000 ohm insulation resistance. Ideal for PCB applications requiring a mating contact pitch of 3.7592mm, it has a temperature range of -20 to 85°C and UL flammability rating of 94V-0.
52610-2333
The Molex 52610-2333 FFC/FPC connector features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. Ideal for board mounting applications, this female connector has a total of 23 contacts and operates b/w -40°C to +85°C, meeting UL and CSA standards.
52610-3015
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Contact Style: BELLOWED TYPE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved