Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 52271-2079 is a FFC/FPC connector with 20 contacts, 0.039" pitch, and TIN BISMUTH finish. It has an insulation resistance of 100M ohm, operates b/w -40 to 85°C, and is UL94V-0 rated. Ideal for board mounting applications requiring a durable, right-angle female connector with surface mount termination.
Median Price
$1.100
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.440
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$0.678
Heilind Electronics
$0.897
RS Americas
$1.560
$1.220
$1.090
Farnell
$1.680
$0.986
$0.845
Element14
$1.683
$1.184
Mouser Electronics
$1.950
$1.420
$1.150
DigiKey
$2.140
$1.509
TTI Europe
$0.880
Newark
$1.660
Verical
$0.518
TTI
$0.920
Powell Electronics
$1.160
PEI Genesis
Master Electronics
$1.054
$0.966
Interstate Connecting
$0.902
$0.877
Digiode
$1.016
Nova Conductors
$1.071
Freelance Electronics
$1.102
$1.157
$1.091
TME
$1.380
$0.940
$0.730
$0.670
Maritex
$1.477
$0.676
$0.622
Chip Stock
Rutronik
$0.777
$0.728
NAC Semi
$0.758
$0.702
IBS Electronics
$0.333
$0.912
Vyrian
VNN
ComSIT Distribution GmbH
Atlantic Semiconductor
Prism Electronics
Inventory MP
Bristol Electronics
LIBRA Elektronik GmbH
ABC Electronics Ltd.
Diverse Electronics
Halfin
Microfarads
Lantek
Elcom Components
Corphita
$0.963
Argo Parts USA
$1.000
Continental Prestige Electronics
$1.740
$0.650
Andel Nordic
$8.217
$7.889
Perfect Parts
Assy Fe
Kepictronics
Abacus Technologies
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
Speed Components Ltd (Excess)
Close contact pitch allows for high-density connections, making it suitable for applications where space is limited.
Standard body length providing a stable and secure connection.
High insulation resistance ensures minimal signal loss and interference.
Compact body width suitable for tight spacing requirements on PCBs.
Safe voltage rating for reliable operation and protection against electrical faults.
TIN BISMUTH finish provides good conductivity and corrosion resistance for durability.
Sufficient body depth for secure contact and stability during operation.
POLYAMIDE insulator material offers good thermal and electrical properties for reliable performance.
FITTING NAIL board mounting option provides secure attachment to PCB for stability.
High maximum operating temperature range suitable for various environmental conditions.
Low minimum operating temperature allows for reliable performance even in cold environments.
Suitable connector type for flexible flat cable applications, providing flexibility and ease of installation.
UL 94V-0 flammability rating ensures fire safety compliance for added protection.
Suitable rated current for signal transmission, ensuring efficient power delivery.
Compliance with UL and CSA standards ensures quality and safety in product design.
Adequate number of contacts for various connection requirements in electronic devices.
Reliable durability of 30 cycles ensures long-lasting performance and connection stability.
Board mounting type provides easy and secure attachment to PCBs for stable connections.
Rectangular PCB contact pattern ensures proper alignment and connection for seamless operation.
Surface mount termination type offers easy installation and secure connection on PCBs.
Zero insertion force (ZIF) design minimizes withdrawal force for easy removal and reconnection.
Female contact gender for compatibility with male connectors, ensuring proper mating and connection.
Low contact resistance ensures efficient signal transmission and minimal power loss.
Right angle mounting style for versatile installation options and space-saving design.
Single prong contact style for simple and reliable connection with mating contacts.
Zero insertion force (ZIF) design minimizes insertion force for easy and secure connection.
Locking mounting option provides additional security and stability for the connector.
Rectangular contact pattern for proper alignment and secure connection with mating contacts.
Commercial-grade reliability ensures consistent performance and durability for various applications.
Headers & Edge Type Connectors 52271-2079 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
52271-2079 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Devs Location 15/Aug/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Vishay Telefunken
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
Semitronics
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Silicon Group
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
22-01-3067
Molex
The Molex 22-01-3067 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.622 inch. It has an insulation resistance of 1000000000 ohm and can withstand a dielectric voltage of 700VAC. This connector is commonly used in commercial applications due to its durability, removable contact block design, and polarization key feature.
502351-0800
The Molex 502351-0800 is a board connector with mating contact pitch of 0.079", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. It is used in commercial applications requiring an 8-contact male receptacle with crimp termination for cable mounting.
307-074-422-208
Edac
Edac 307-074-422-208 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 2 rows. It features a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm. With UL94V-0 flammability rating, it's ideal for applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
MEM2075-00-140-01-A
Global Connector Technology
MEM2075-00-140-01-A by Global Connector Technology is a PCB connector with 8 contacts, 0.043" pitch, and 1u plating thickness. It has a temperature range of -25 to 85°C and insulation resistance of 1Gohm. Ideal for applications requiring durable connectors with high mating cycles in electronics manufacturing.
FTSH-105-01-F-DV-K-P-TR
Samtec
Samtec's FTSH-105-01-F-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
FTSH-105-01-L-DV-K-FR
Samtec's FTSH-105-01-L-DV-K-FR is a 10-contact, 2-row male board connector with tin finish and nickel barrier. Featuring a terminal pitch of 1.27mm, it is UL 94V-0 rated for surface mount applications. Ideal for use in headers & edge type connectors on PCBs.
MTCB1X-XXX-106CS025
BOARD CONNECTOR;
S3B-XH-A
S3B-XH-A by J S T Mfg is a 3-contact board connector with brass contacts and tin over copper finish. It operates b/w -25°C to 85°C, UL94V-0 rated for flammability. Ideal for right-angle mounting in applications requiring reliable soldered connections on boards.
50-57-9404
The Molex 50-57-9404 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a body length of 0.399", insulation resistance of 10^10 ohm, and operating temperature range from -40 to 105°C. Ideal for use in electronics requiring a reliable female plug connector with crimp termination and polarized housing.
B4B-PH-K-S(LF)(SN)
B4B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator material and BRASS contact material. Ideal for applications requiring a male SQ PIN-SKT contact style on a RECTANGULAR PCB pattern.
BM08B-SRSS-TBT(LF)(SN)
BM08B-SRSS-TBT(LF)(SN) by J S T Mfg is a 8-contact BOARD CONNECTOR with 0.039" pitch, 0.039" row spacing, and 100000000 ohm insulation resistance. It features POLYAMIDE insulator, tin finish, and operates b/w -25 to 85 °C. Ideal for applications requiring a polarized housing with UL94V-0 flammability rating.
SHR-04V-S-B
SHR-04V-S-B by J S T Mfg is a 4-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts, CABLE mounting, and CRIMP termination. Ideal for applications requiring secure cable connections in electronic devices.
QSH-030-01-L-D-A-TR
Samtec's QSH-030-01-L-D-A-TR is a 60-contact, 2-row stacking connector with 0.02" pitch. It features tin finish with nickel barrier, operates b/w -55°C to 125°C, and supports up to 1A signal current. Ideal for board-to-board applications requiring high reliability in commercial settings.
22-16-2060
The Molex 22-16-2060 board connector features a mating contact pitch of 0.1", insulation resistance of 500000000000 ohm, and dielectric voltage rating of 250VAC. Ideal for PCB edge locking hook mounting, this female plug connector has a durability of 25 cycles and is rated for a max operating temperature of 105°C.
66506-338LF
AMPHENOL ICC
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
10-11-2023
Molex 10-11-2023 is a board connector with 0.1" mating contact pitch, POLYAMIDE insulator, and 1000VAC dielectric voltage. It's ideal for commercial applications requiring a durable, polarized housing with 2 contacts and crimp termination for 22-30 AWG wires.
PHR-4-L
PHR-4-L by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.079" pitch, POLYAMIDE66 insulator, and 800VAC dielectric voltage. It has a 0.386" body length, -25 to 85 °C operating temp range, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable signal transmission with 2A current at up to 24 AWG wire size.
S3B-XH-A-1(LF)(SN)
S3B-XH-A-1(LF)(SN) by J S T Mfg is a 3-contact board connector with brass contacts and tin finish. It has a terminal pitch of 2.5mm, suitable for right-angle mounting on boards. Ideal for applications requiring reliable male connectors in tight spaces.
SFW12S-2STE1LF
Amphenol Communications Solutions
The Amphenol SFW12S-2STE1LF is a 12-contact FFC/FPC connector with 0.039" pitch, tin finish, and UL94V-0 flammability rating. It is designed for surface mount board applications, featuring female contacts in a straight mounting style. Ideal for compact electronic devices requiring reliable signal transmission.
746-016-520-606
Edac 746-016-520-606 is a 16-contact card edge connector with 0.125" pitch, suitable for PCB mounting. Featuring 3A signal current rating, it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for applications requiring high insulation resistance and UL94V-0 flammability compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
52271-1679
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; DIN Conformance: NO;
52271-1079
Molex 52271-1079 is a FFC/FPC connector with 10 contacts, rated at 0.5A signal current. It features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 500VAC. Ideal for board mounting applications requiring durability, reliability, and high temperature tolerance up to 85°C.
52271-0469
Molex 52271-0469 FFC/FPC connector with 0.039" pitch, 0.118" body width, and TIN finish is ideal for board mounting applications. Features include polyamide insulator, phosphor bronze contacts, and UL94V-0 flammability rating. Suitable for surface mount termination in commercial settings.
52271-1669
Molex 52271-1669 is a FFC/FPC connector with 16 contacts, mating pitch of 0.039", and body width of 0.118". It features TIN over nickel termination finish, polyamide insulator, and UL94V-0 flammability rating. Ideal for board mounting applications requiring surface mount termination in commercial settings.
52271-1269
Molex 52271-1269 FFC/FPC connector with 12 contacts, 0.039" pitch, and 0.118" body width. Ideal for board mounting in commercial applications requiring a right angle female contact style with surface mount termination. Features polyamide insulator material and tin finish for reliable performance.
52271-0479
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Minimum Operating Temperature: -40 Cel;
52271-0679
The Molex 52271-0679 is a FFC/FPC connector with 6 contacts, rated at 0.5A signal current. It has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage withstand of 500VAC. Ideal for board mounting applications, it features a surface mount termination type and right-angle mounting style.
52271-2269
Molex 52271-2269 FFC/FPC connector with 22 contacts, 0.039" pitch, 0.118" body width, and POLYAMIDE insulator. Ideal for board mounting with surface mount termination in applications requiring a reliable right-angle female contact design. Compliant with UL standards (94V-0).
52271-1279
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Mounting Style: RIGHT ANGLE;
52271-2069
Molex 52271-2069 FFC/FPC connector with 20 contacts, 0.039" pitch, 0.118" body width. Ideal for surface mount PCB applications requiring a right angle mounting style and bellowed contact design. Features polyamide insulator material, UL94V-0 flammability rating, and ZIF insertion force.
52271-1879
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of PCB Rows: 1;
52271-0979
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mounting Option-1: LOCKING;
52271-2279
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Pitch (inch): 0.039; Maximum Operating Temperature (Cel): 85; Minimum Operating Temperature: -40 Cel;
52271-3079
52271-1069
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; DIN Conformance: NO;
52271-1869
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Filter Feature: NO; Mounting Style: RIGHT ANGLE;
52271-0569
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Plating Thickness (inch): 4u; Mating Contact Pitch (inch): 0.039;
52271-0490
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of PCB Rows: 1; Terminal Pitch (mm): 1; Total No. of Contacts: 4;
52271-2469
Molex 52271-2469 is a FFC/FPC connector with 24 contacts and a mating contact pitch of 0.039". It has a right angle mounting style and is suitable for surface mount termination. This connector, made of polyamide, is commonly used in commercial applications requiring reliable board-to-board connections.
52271-2090
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mounting Type: BOARD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved