Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1000VAC; Body Length: 1.339 inch; Mating Contact Row Spacing (inch): 0.079; Insulation Resistance: 1000000000 ohm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$1.785
$1.714
Corphita
Headers & Edge Type Connectors 501646-3203 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Minimum Insulation Diameter:
Insulation Resistance:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mounting Option-1:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Total No. of Contacts:
Maximum Wire Size:
Minimum Wire Size:
501646-3203 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KYOCERA AVX
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS303C
Idec
ROTARY SWITCH;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
Onsemi
Unitrode
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Intertechnology
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
22-28-4033
Molex
Molex 22-28-4033 is a board connector with 0.1" pitch, suitable for commercial applications. It features 3 male contacts with matte tin finish, rated at 4A signal current. With a durability of 25 cycles and UL94V-0 flammability rating, it offers reliable performance in temperatures ranging from 0 to 75°C.
35362-0250
Molex 35362-0250 is a board connector with 2 contacts, featuring TIN COPPER finish. It has a mating contact pitch of 0.079" and body dimensions of 0.303" x 0.217" x 0.335". Ideal for commercial applications requiring reliable rectangular PCB contact patterns and solder termination.
DF40C-60DP-0.4V(51)
Hirose Electric
DF40C-60DP-0.4V(51) by Hirose Electric is a 2-row, 60-contact board stacking connector with gold over nickel finish. It features liquid crystal polymer insulator, 100VAC dielectric voltage, and 0.3A signal current rating. Ideal for PCB applications requiring durability, reliability, and polarization key for secure connections.
15-31-1033
The Molex 15-31-1033 header connector features a body length of 0.661", insulation resistance of 1Gohm, and dielectric voltage rating of 1500VAC. Ideal for board connections in commercial applications, it has a female contact gender, polyamide insulator material, and operates b/w -40 to 105°C.
501568-0607
The Molex 501568-0607 is a board connector with a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 350VAC. It is used in applications requiring a durable, right-angle mounting style for up to 30 cycles, ideal for commercial reliability standards.
851-43-045-10-002000
Mill-max Mfg
851-43-045-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 45 FEMALE contacts. It features TIN finish, 1.27mm pitch, and SOLDER termination. Ideal for applications requiring reliable connections in electronic devices or PCBs.
1-640456-2
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Terminal Pitch (mm): 2.54; Mating Contact Finish: NOT SPECIFIED;
1-281739-0
TE Connectivity 1-281739-0 is a POLYETHYLENE insulator BOARD CONNECTOR with 20 contacts, rated at 3A. It has a polarization key and operates b/w -40 to 100 °C. The connector features tin termination finish, UL94V-0 flammability rating, and is suitable for applications requiring high insulation resistance.
DF40HC(3.0)-100DS-0.4V(58)
DF40HC(3.0)-100DS-0.4V(58) by Hirose Electric is a 2-row stacking connector with 100 contacts, 0.016" pitch, and 100VAC voltage rating. Ideal for board mounting applications in commercial settings due to its durability of 30 cycles and phosphor bronze contact material.
307-074-422-212
Edac
Edac 307-074-422-212 is a CARD EDGE CONNECTOR with 74 contacts, 5A signal current rating, and 2545VAC dielectric voltage. It has a 0.156" pitch for PCB mating and operates b/w -40 to 105°C. Ideal for board and panel mounting applications requiring high insulation resistance.
DT06-3S-EP06
TE Connectivity's DT06-3S-EP06 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125°C. Ideal for cable mounting applications, it has a polarization key and UL 94V-0 flammability code.
307-074-422-208
Edac 307-074-422-208 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 2 rows. It features a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm. With UL94V-0 flammability rating, it's ideal for applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
S4B-XH-A-1(LF)(SN)
J S T Mfg
S4B-XH-A-1(LF)(SN) by J S T Mfg is a 4-contact board connector with brass contacts, tin finish, and 2.5mm pitch. It is used for right-angle mounting in headers & edge type connectors applications.
B02B-PASK-1(LF)(SN)
B02B-PASK-1(LF)(SN) by J S T Mfg is a 2-contact board connector with 0.079" pitch, suitable for PCB mounting with 800VAC dielectric voltage. Featuring glass-filled polybutylene terephthalate insulation and copper alloy contacts, it operates b/w -25 to 85°C, making it ideal for signal applications requiring up to 3A current.
851-43-030-30-002000
The Mill-max Mfg 851-43-030-30-002000 is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 1.27mm and is designed for SURFACE MOUNT applications. Ideal for use in electronic devices requiring FEMALE SOCKET connectors on PCBs.
B14B-PUDSS-1(LF)(SN)
B14B-PUDSS-1(LF)(SN) by J S T Mfg is a 1-row loaded board connector with 14 contacts. It has a terminal pitch of 2mm and uses solder termination. This connector is commonly used in applications requiring male contact gender and straight mounting style.
MM60-52B1-E1-R650
Japan Aviation Electronics Industry
MM60-52B1-E1-R650 by Japan Aviation Electronics is a 52-contact card edge connector with gold over nickel finish. It has a mating contact pitch of 0.031", operates b/w -40 to 80°C, and offers a dielectric voltage of 424VAC. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
22-14-2104
The Molex 22-14-2104 is a board connector with 10 contacts, rated at 2.5A signal current and featuring a mating contact pitch of 0.1". With a body length of 0.996", it is designed for PCB edge locking hook mounting applications, offering durability of 25 cycles and insulation resistance of 500000000000 ohm.
15910100
W+p Products
15910100 by W+p Products is a BOARD CONNECTOR with 10 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications requiring a right angle mounting style and solder termination.
B5B-ZR-SM4-TF(LF)(SN)
B5B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" pitch, 500VAC dielectric voltage, and 1A signal current rating. Ideal for PCB applications requiring POLARIZED HOUSING, this connector features BRASS contacts and POLYAMIDE6T insulation material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved