Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 501330-0200 is a board connector with a mating contact pitch of 0.039". It features an insulation resistance of 100M ohm and dielectric voltage rating of 250VAC. Ideal for commercial applications, this connector has a female contact gender and operates b/w -40 to 85°C temperatures.
Median Price
$0.147
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.132
100+ parts
-
1k+ parts
10k+ parts
$0.107
Arrow
$0.145
$0.099
$0.089
Heilind Electronics
$0.155
$0.124
Mouser Electronics
$0.270
$0.184
$0.153
$0.134
DigiKey
$0.192
$0.163
$0.151
Element14
$0.468
$0.283
$0.221
$0.200
Verical
PEI Genesis
Farnell
$0.144
Powell Electronics
$0.139
TTI
$0.129
$0.114
Master Electronics
$0.141
$0.122
Newark
$0.222
$0.186
Chip1Stop
$0.152
$0.133
$0.130
Distrelec
PSC Electronics
NEP Electronics
Digiode
$0.115
Nova Conductors
$0.166
Chip Stock
IBS Electronics
$0.150
$0.143
Vyrian
Bristol Electronics
VNN
Prism Electronics
Semicontronic
$0.042
$0.041
Corphita
$0.109
Aranea Global
$0.156
Argo Parts USA
$0.161
Advanced Electronics
$0.187
$0.172
$0.162
Continental Prestige Electronics
$0.309
$0.131
Aztec Data Supply Inc.
$2.546
Perfect Parts
EMSNET (Excess)
RC Electronics
$0.170
$0.160
Kepictronics
GreenTree Electronics
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
Eastek
Glotronic Ltd.
Assy Fe
The close contact pitch allows for a secure and reliable connection between the headers and edge type connectors.
The compact body length makes the product suitable for applications where space is limited.
High insulation resistance ensures reliable performance and prevents electrical leakage.
The slim body width allows for easy installation in tight spaces or densely populated circuit boards.
The high dielectric voltage rating provides protection against electrical breakdown and ensures safe operation.
The adequate body depth helps in accommodating the connectors securely and provides stability to the connection.
The use of durable and reliable insulator material ensures long-term performance and resistance to heat and mechanical stress.
The high maximum operating temperature makes the connectors suitable for a wide range of environments and applications.
The preassembled contact design simplifies installation and ensures proper alignment for a secure connection.
The low minimum operating temperature allows the connectors to function effectively even in harsh cold environments.
The board connector type is versatile and widely compatible with various PCB layouts and designs.
The UL flammability code 94V-0 signifies high flame retardancy and safety standards for the connectors.
The polarization key ensures proper alignment and prevents incorrect insertion of the connectors, improving overall reliability.
The high rated current capacity allows the connectors to handle signal transmission efficiently without risk of overheating.
The white insulator color is visually appealing and helps in easy identification and sorting of connectors.
Compliance with UL standards ensures quality, safety, and reliability of the connectors for various applications.
The two contacts provide versatility and flexibility in connecting various components or devices.
The cable mounting type offers convenience and ease of installation in different setups and configurations.
The crimp termination type ensures a secure and stable connection between the wire and the connector.
The female contact gender is commonly used and compatible with a wide range of male connectors, providing flexibility in connectivity.
Low contact resistance ensures efficient signal transmission and minimizes power loss in the connectors.
The receptacle body style offers a secure housing for the connectors, providing protection and stability to the connection.
The square pin socket contact style ensures a reliable and stable connection with compatible mating connectors.
The locking mounting option provides additional security and prevents accidental disconnection of the connectors.
The rectangular contact pattern enables easy alignment and connection between the connectors, ensuring proper functionality.
Commercial reliability standards ensure consistent performance and durability of the connectors in various commercial applications.
Headers & Edge Type Connectors 501330-0200 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
501330-0200 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Location 06/Jan/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
Comchip Technology
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
Rectron
NE555D
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
104031-0811
Molex
104031-0811 by Molex is a PCB connector with 8 contacts, gold finish, and 0.043" pitch. It has a glass-filled liquid crystal polymer insulator, operates b/w -25°C to 85°C, and offers durability of 10k cycles. Ideal for commercial applications requiring male compression contacts in right-angle mounting on boards.
61302821121
Wuerth Elektronik & Kg
Wurth Elektronik 61302821121 is a 28-contact board connector with gold over nickel finish. It has a pitch of 0.1 inch, rated for 3A signal current, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable male connectors on PCBs with rectangular contact patterns at a spacing of 2.54mm.
M80-8262042
Harwin Plc
M80-8262042 by Harwin PLC is a 20-contact male plug board connector with 0.079" mating contact pitch and POLYAMIDE insulator material. It has a rated current of 3A, operates b/w -55 to 125°C, and offers high durability with 500 cycles. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
XHP-10
J S T Mfg
XHP-10 by J S T Mfg is a 10-contact board connector with female crimp termination. It has UL 94V-0 flammability rating and is used in cable mounting applications. This receptacle connector is ideal for various electronic devices requiring secure and reliable connections.
50-37-5043
The Molex 50-37-5043 is a board connector with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 0.217" body width. It has a dual polarized polarization key and is rated for 3A signal current. This female receptacle connector with crimp termination is ideal for commercial applications requiring reliable connections in the temperature range of -40 to 105°C.
S2B-PH-K-S
S2B-PH-K-S by J S T Mfg is a BOARD CONNECTOR with BRASS contacts and TIN finish. Featuring 2 contacts, it has a terminal pitch of 2mm and is ideal for RIGHT ANGLE mounting on boards. This connector is UL 94V-0 rated, making it suitable for various electronic applications.
22-05-3021
Molex 22-05-3021 is a board connector with 2 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.2"x0.25"x0.442". It uses matte tin/copper termination finish, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right-angle mounting style with solder termination.
39-53-2145
Molex 39-53-2145 FFC/FPC connector with 14 contacts, 0.049" pitch, and 0.915" body length. Ideal for PCB applications requiring a 1.25mm terminal pitch and staggered contact pattern. Features polyester insulator material, UL94V-0 flammability code, and solder termination for reliable commercial use.
61301021121
61301021121 by Wurth Elektronik is a Board Connector with 10 contacts, rated at 3A signal current. It features gold over nickel termination finish, polybutylene terephthalate insulator material, and copper alloy contact material. Ideal for commercial applications requiring a reliable connection on PCBs with a mating contact pitch of 0.1 inch.
S4B-ZR-SM4A-TF(LF)(SN)
S4B-ZR-SM4A-TF(LF)(SN) by J S T Mfg is a 4-contact board connector with a mating contact pitch of 0.059". It features brass contacts with tin over copper finish, suitable for surface mount termination. This right-angle connector, made of polyamide6T insulator material, is ideal for applications requiring compact and reliable edge type connections.
5650473-5
TE Connectivity
TE Connectivity 5650473-5 is a 3-row BOARD EURO CONNECTOR with 96 contacts. Featuring GLASS FILLED POLYMER insulator, it has a mating contact pitch of 0.1 inch and operates b/w -55 to 105 °C. Ideal for commercial applications requiring high insulation resistance and rated current of 1.5A.
22-28-4037
Molex 22-28-4037 is a board connector with 0.1" pitch, 3 contacts, and 4A signal rating. It features glass-filled polyamide insulation, tin contact finish, and operates b/w 0-75°C. Ideal for commercial applications requiring reliable connections in electronic devices.
M50-3600542P
M50-3600542P by Harwin Plc is a 10-contact, surface mount board connector with a terminal pitch of 1.27mm. It features tin contact finish with a nickel barrier and is suitable for applications requiring UL flammability code 94V-0 compliance.
1939115-1
TE Connectivity 1939115-1 is a PCB connector with 9 contacts, rated at 0.5A. It features liquid crystal polymer insulator, right angle mounting style, and surface mount termination type. Ideal for commercial applications requiring a male contact gender and rectangular PCB contact pattern.
52610-3072
The Molex 52610-3072 FFC/FPC connector features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 700VAC. Ideal for board mounting applications, this female connector has a total of 30 contacts, staggered PCB pattern, and surface mount termination type.
ZHR-3
ZHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.059" pitch, POLYAMIDE66 insulator, and 500VAC dielectric voltage. Ideal for CABLE mounting applications, it has a rated current of 1A and operates b/w -25 to 85°C.
5034801000
Molex 5034801000 FFC/FPC connector with 10 contacts, 0.020" pitch, and 50000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings due to its 200VAC dielectric voltage and -40 to 85°C operating temperature range.
22-11-2042
Molex 22-11-2042 is a board connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring brass contacts, matte tin finish, and polyamide insulator material, it offers high durability with 50 cycles. With a rated current of 4A and operating temperature range from 0 to 75°C, it meets UL and CSA standards for commercial applications.
BM05B-SRSS-TB(LF)(SN)
BM05B-SRSS-TB(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCBs, it features POLYAMIDE insulator, COPPER ALLOY contacts, and operates b/w -25 to 85 °C.
22-23-2041
The Molex 22-23-2041 is a board connector with 0.1" pitch, suitable for commercial applications. It features brass contacts with matte tin finish, white polyamide insulator, and 4 male pins in a rectangular pattern. The connector has a total of 4 contacts and offers high insulation resistance of 1000000000 ohm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
501330-0600
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Length: .303 inch; Total No. of Contacts: 6;
501330-0400
The Molex 501330-0400 is a board connector with 0.039" mating contact pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. It features a glass-filled polyamide insulator and operates b/w -40 to 85 °C. Ideal for commercial applications requiring a reliable female receptacle connector with crimp termination on a cable mount.
501331-0607
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 350VAC; No. of Connectors: ONE;
5013310407
Molex 5013310407 is a board connector with 4 contacts, 0.039" pitch, and tin finish. Ideal for applications requiring male surface mount connectors with polyamide insulator, operating b/w -40°C to 105°C. Suitable for use in UL-rated systems needing high insulation resistance and flammability code of 94V-0.
501330-0500
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Termination Contact Finish: NOT APPLICABLE;
5013310507
Molex 5013310507 is a board connector with 0.039" mating contact pitch, suitable for commercial applications. Featuring TIN termination finish and PHOSPHOR BRONZE contacts, it operates b/w -40 to 105 °C. Ideal for surface mount PCB connections with 5 male contacts in a rectangular pattern.
501330-0800
The Molex 501330-0800 is a board connector with 8 contacts, 0.039" pitch, and glass-filled polyamide insulator. It operates b/w -40°C to 85°C, has a contact resistance of 20 mΩ, and is used in commercial applications for cable mounting with crimp termination.
501330-1000
501330-1000 by Molex is a BOARD CONNECTOR with 10 contacts, 0.039" pitch, and GLASS FILLED POLYAMIDE insulator. It has a temperature range of -40 to 85°C and is ideal for commercial applications requiring reliable female crimp connectors with locking mounting option.
5013310207
Molex 5013310207 is a BOARD CONNECTOR with 0.039" pitch, 0.157" body length, and 100000000 ohm insulation resistance. Ideal for commercial applications, it features POLYAMIDE insulator material and operates b/w -40 to 105 °C temperature range.
501331-1107
501330-1500
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; Mating Contact Finish: NOT SPECIFIED;
501331-0307
The Molex 501331-0307 is a board connector with mating contact pitch of 0.039", insulation resistance of 100M ohm, and operating temperature range from -40 to 105°C. It features surface mount termination, male contact gender, and rectangular PCB contact pattern. Ideal for commercial applications requiring a reliable connection in electronic devices.
501330-1100
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Pattern: RECTANGULAR; MIL Conformity: NO;
501330-0300
The Molex 501330-0300 is a board connector with 0.039" mating contact pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. It is used in commercial applications for signal currents up to 1A, featuring a female contact gender and crimp termination type.
501331-0907
501331-0707
501331-0807
501330-1400
The Molex 501330-1400 is a board connector with a mating contact pitch of 0.039 inches and a body length of 0.618 inch. It has an insulation resistance of 1,000,000,000 ohm and can withstand a dielectric voltage of 424VAC. This connector is commonly used in commercial applications requiring reliable signal connections.
5013311007
The Molex 5013311007 board connector features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 350VAC. Ideal for commercial applications, this male connector with surface mount termination is designed for use in PCBs with a rectangular contact pattern.
501330-0638
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved