Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY;
Median Price
$3.460
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$2.060
100+ parts
-
1k+ parts
10k+ parts
RS Americas
$4.310
$4.010
Mouser Electronics
$5.410
$4.130
$3.510
Distrelec
$5.714
$3.602
DigiKey
$6.100
$4.271
$3.539
NEP Electronics
Chip1Stop
$3.920
$3.560
TTI
$3.020
Master Electronics
$3.440
$3.260
$2.790
Verical
$3.420
Powell Electronics
$3.320
$2.840
Nova Conductors
$3.190
Digiode
$3.287
VNN
Vyrian
IBS Electronics
$3.829
$3.703
$3.170
Andel Nordic
$2.192
$2.105
Corphita
$3.114
Continental Prestige Electronics
$3.126
Argo Parts USA
Netroflash
Allen Electronics Distributors
$6.580
Neutron USA
$214.690
Perfect Parts
Assy Fe
Electrical Wires & Cables 451320601 attributes and parameters. Explore more Electrical Wires & Cables devices from Molex
Connector Accessory Type:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
M22759/34-22-9
TE Connectivity
TE Connectivity's M22759/34-22-9 is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. With a temperature range of -65 to 150°C, this copper alloy conductor wire in 22 AWG size is suitable for MIL-DTL-22759 cables and fixtures.
145101-01-M0.25
Amphenol
M22759/11-20-9
Standard Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Maximum Operating Temperature: 200 Cel; Resistance: .03 ohm;
12916
Helukabel
Helukabel 12916 is a CE, CSA, and UL approved CONTROL CABLE with STRANDED construction and PVC jacket. Ideal for PLANT ENGINEERING and MACHINERY MANUFACTURING applications. Features include 300V rating, -40 to 80°C operating temp range, and 0.75mm² cross-section area.
5010/15CSL002
Alpha Wire
Wires and Cables;
M22759/32-22-9
TE Connectivity's M22759/32-22-9 wire is MIL-approved with 600V rating, ETFE insulator, and copper alloy conductor. Ideal for applications requiring flexibility and durability in a wide temperature range (-65 to 150°C), such as military and aerospace industries.
40155
WIRE AND CABLE;
DPA00006-2M
Infinite Electronics International
2451320410
Molex
Molex 2451320410 wire is UL approved for 300V, AWG 20 gauge, and 5.5mm diameter. Ideal for POWER applications with MICRO-FIT 3.0 connectors on both sides, ensuring reliable electrical connections in various setups.
FFSD-05-D-02.50-01-N
Samtec
Samtec's FFSD-05-D-02.50-01-N is a UL approved flat cable with 10 conductors, TIN finish, and PVC insulation. Featuring 30 AWG wire gauge, it has a cross section area of 0.051 mm2 and can handle up to 2.3A current. Ideal for applications requiring a temperature range from -40°C to 105°C.
282784-000
TE Connectivity's 282784-000 wire is a flexible cord with 24 AWG copper alloy conductor, rated for 600V and -65 to 150°C. Ideal for electrical applications requiring durable cables with TIN finish, such as fixtures and power cords.
M27500-22ML1T08
TE Connectivity's M27500-22ML1T08 is a MIL-DTL-27500 cable with 600V rating, TIN finish, and copper alloy conductor. It operates b/w -65°C to 150°C, suitable for flexible cord and fixture wire applications.
34148
WIRE AND CABLE; Rated Voltage: 225 V; Shielding: YES; Approvals (V): CE; DIN; VDE; IEC Conformity: NO; Wire & Cable Name: COMMUNICATION CABLE;
U426-003
Tripp Lite
M81044/12-22-9
TE Connectivity's M81044/12-22-9 is a 600V stranded wire with tin finish, suitable for general purpose applications. Featuring a conductor made of copper alloy, it has a temperature range from -65 to 150°C and a diameter of 1.19mm. This MIL-DTL-81044 cable type is flexible and lightweight, ideal for various electrical projects.
55A0111-22-98
TE Connectivity's 55A0111-22-98 cable is a stranded wire with tin finish, rated at 600V. With a conductor material of copper alloy and max operating temperature of 150°C, it is ideal for general purpose and lightweight applications. Featuring a wire gauge of 22 AWG, this flexible cord and fixture wire has a diameter of 1.09mm and stranding of 19X34 for versatile use.
CO-174SMAZBNC-005
M27500-20ML2T08
TE Connectivity's M27500-20ML2T08 is a 600V rated cable with TIN finish, suitable for temperatures ranging from -65°C to 150°C. Featuring a copper alloy conductor and 20 AWG wire gauge, it is ideal for applications requiring MIL-DTL-27500 cables such as flexible cords and fixture wires.
IDSD-20-D-06.00-G-R
CABLE ASSEMBLY; Rated Current: 3.4 A; Shielding: NO; Stranding: 7X36; Construction: STRANDED; Maximum Operating Temperature: 105 Cel;
15022
Helukabel 15022 is a CE, EAC, IPA, VDE approved control cable with PVC jacket and insulation. Featuring stranded construction, it has 5 bare copper conductors with 0.75 mm2 cross-section area. Ideal for flexible use in medium mechanical stresses at temperatures ranging from -40 to 80 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
45134
Helukabel 45134 is a CE-approved stranded flat cable with PVC jacket and tin finish. It has 20 conductors, each made of copper alloy with 0.09 mm2 cross-section area. Ideal for quick IDC connections, it operates b/w -20 to 80 °C, making it versatile for various electrical applications.
45135
Helukabel 45135 is a CE-approved stranded flat cable with PVC jacket and tin finish. With 24 conductors, it's ideal for quick IDC connections at 300V. Operating from -20 to 80°C, this cable has a cross-section area of 0.09mm2 and resistance of 0.23 ohm, making it suitable for various electrical applications.
451320801
451300603
451350201
451350401
451300803
451350603
451350610
451300801
451350601
451320803
451320810
451320603
451350810
451320401
451320403
451320410
451320610
451360401
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved