Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY;
Median Price
$17.250
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$6.490
100+ parts
-
1k+ parts
10k+ parts
Arrow
$13.040
NEP Electronics
$15.140
Verical
$16.690
$14.010
Farnell
$17.810
$13.670
$12.330
Mouser Electronics
$21.380
$16.840
$16.750
DigiKey
$23.320
$16.850
$15.043
Element14
$33.300
$24.060
$21.620
Encitech
$104.050
PEI Genesis
Powell Electronics
$14.190
Nova Conductors
$14.940
VNN
Vyrian
Rapid Electronics
IBS Electronics
$12.738
TME
Aztec Data Supply Inc.
$2.730
Corohmni
$3.246
Ampacity Inc.
$5.080
Semicontronic
$4.953
$4.928
AZTECH Wire
$10.068
Gateway Technologies
$13.296
Netroflash
$14.193
$13.894
Advanced Electronics
$15.239
Continental Prestige Electronics
$15.290
$11.730
Singapore Electronics
$16.433
$15.282
$14.625
$13.968
Modulus Dynamics
$16.583
$16.418
$15.920
Argo Parts USA
Electrical Wires & Cables 135101-04-M1.00 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Connector Accessory Type:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Hy Electronic
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Multicomp Pro
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
24450
Helukabel
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Wire Gauge (AWG): 20; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Insulator Material: POLYPROPYLENE;
89841002500
Belden
WIRE AND CABLE;
151661014
Molex
Molex 151661014 flat cable with UL approval, rated for 60V, features 31 conductors of tin-finished copper alloy. With a max operating temp of 105°C and -40°C min, it's ideal for electrical wiring applications requiring flexibility and durability in various environments.
80893
Helukabel 80893 is a communication cable with 48 conductors, suitable for indoor cabling. It has approvals from DIN and VDE, operating b/w -20°C to 60°C. With a diameter of 13.5mm, it's ideal for patching and crossing applications.
1233160005
Weidmueller & Kg
Weidmueller & Kg's 1233160005 is a stranded communication cable with shielding, PE insulator, and copper alloy conductor. It has approvals from ANSI, CUL, EN, IEC, UL for applications requiring RJ45 connectors and operating temperatures b/w -20 to 60°C.
33152430100013
Harting Electronics & Kg
52052
Helukabel 52052 is a CE and EAC approved power cable with shielding, rated for 500V. Featuring nickel conductor finish, it's ideal for iron and steel works, rolling mills, and foundries. With a temperature range of -60 to 400 °C, this copper alloy cable has 7 conductors at 4mm2 cross-section area.
80800
The Helukabel 80800 is a solid construction communication cable with 4 conductors, DIN and VDE approvals. Ideal for indoor use in small to medium transmission lines, it operates b/w 0°C to 60°C. Diameter of 7.4mm makes it suitable for various electrical applications.
18356
The Helukabel 18356 is a CE, DIN, EAC approved cable with stranded construction and polyurethane jacket. It features a rated voltage of 300V, suitable for robust applications in dry, damp, and wet rooms. With TPE insulator material and operating temperatures from -40 to 90°C, it's ideal for communication and control purposes.
3-1437356-0
TE Connectivity
3-1437356-0 by TE Connectivity is a 28 AWG stranded flat cable with PVC jacket, UL approval, and tin finish. It has 10 conductors, rated for 300V DC voltage and 2A current. Ideal for electrical wiring applications requiring flexibility and durability in temperatures ranging from -20 to 105°C.
3365/16SF
3m Electronic Products Division
3m Electronic Products Division's 3365/16SF is a UL-approved FLAT FLEXIBLE CABLE with 16 conductors of STRANDED TINNED COPPER. It has a rated voltage of 300V, operating from -20 to 105°C, making it ideal for electrical wiring applications.
M100-006-WH
Tripp Lite
55A0111-24-92
TE Connectivity's 55A0111-24-92 wire is a stranded cable with tin finish, rated for 600V. Featuring radiation-crosslinked modified ETFE insulation, it operates b/w -65 to 150°C. Ideal for flexible cord and fixture wire applications due to its copper alloy conductor and 24 AWG size.
97946061000
IDSD-20-D-06.00-P37-G
Samtec
Samtec IDSD-20-D-06.00-P37-G is a UL approved stranded flat cable with 39 conductors, rated for 425V and 3.4A. Featuring tin-finished copper alloy conductors and PVC insulation, it operates b/w -20°C to 105°C. Ideal for applications requiring reliable electrical connections in various industries.
3049BK001
Alpha Wire
3049BK001 by Alpha Wire is a stranded electrical wire with a rated voltage of 300V. It has a conductor made of copper alloy and an insulator made of PVC. This flexible cord and fixture wire is suitable for applications requiring a temperature range of -40 to 105°C.
U.FL-2LP-088K1T-A-(300)
Hirose Electric
U.FL-2LP-088K1T-A-(300) by Hirose Electric is a stranded communication cable with FEP jacket and silver conductor finish. It operates b/w -40 to 90°C, suitable for electronic and wireless applications. Featuring 30 AWG wire gauge, it has a diameter of 1.37mm and stranding of 7X0.102 for reliable connectivity.
3075BK005
Alpha Wire's 3075BK005 is a CE, CSA, and UL approved electrical wire with stranded construction. Featuring a rated voltage of 600V, it has a conductor made of tin-coated copper alloy. This flexible cord and fixture wire operates b/w -40°C to 105°C, making it ideal for various electrical applications.
C3365/20
C3365/20 by 3M Electronic Products Division is a flat flexible cable with 20 conductors, rated at 300V. Featuring tinned copper conductor material and PVC insulation, it operates b/w -20°C to 105°C. Approved by CUL and UL, it is ideal for electrical wiring applications requiring flexibility and durability.
LMR-240-UF
Times Microwave Systems
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
135101-02-M0.25
135101-02-M1.00
135110-02-M0.25
135110-01-M0.75
135103-02-03.00
135111-03-M0.25
135101-04-M0.50
135111-03-M0.50
135111-03-M0.75
135101-01-M0.75
135101-01-M0.25
135101-02-72.00
135103-02-M0.25
135104-01-M0.75
135103-01-M0.25
135101-R2-03.00
Amphenol's 135101-R2-03.00 is a shielded communication cable with 500V rating, 3.58mm diameter, and 0.076mm length. It features SMA PLUG connectors on both sides and is ideal for various electrical applications requiring reliable signal transmission.
135101-07-72.00
135101-R2-M1.00
CABLE ASSEMBLY; Connector Side-1: SMA PLUG 132102; Connector Side-2: SMA PLUG 132102; Rated Voltage: 500 V; Shielding: YES; No. of Conductors: 1;
135111-04-M0.50
135101-04-M0.75
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved