Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY;
Median Price
$28.790
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$6.796
100+ parts
$6.184
1k+ parts
$5.573
10k+ parts
-
Element14
$23.879
$19.871
Mouser Electronics
$33.700
$25.940
$25.320
DigiKey
$34.030
$24.590
$23.052
Newark
$38.240
$30.480
$29.860
Powell Electronics
$17.700
Nova Conductors
$16.810
VNN
Vyrian
Andel Nordic
$0.790
$0.551
Aztec Data Supply Inc.
$4.074
Semicontronic
$5.780
$5.636
$5.607
Ampacity Inc.
Advanced Electronics
Corohmni
$7.080
Continental Prestige Electronics
$14.170
Gateway Technologies
$14.960
Singapore Electronics
$18.490
$17.195
$16.456
$15.716
Argo Parts USA
Electrical Wires & Cables 135111-04-M0.50 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Connector Accessory Type:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
Digitron Semiconductors
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Bytesonic Electronics
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
Synsemi
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
1554216002
Molex
WIRE AND CABLE;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
5204
Quabbin Wire & Cable
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Conductor Finish: TIN; DIN Conformity: NO; Approvals (V): CEC; ETL; NEC;
M22759/11-22-9
Standard Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Maximum Operating Temperature: 200 Cel; Resistance: .05 ohm; Construction: STRANDED;
82-28-3010
Molex 82-28-3010 is a FLAT RIBBON CABLE with 10 conductors, STRANDED construction, and TIN finish. It has a rated voltage of 300V, operating temperature range from -20°C to 105°C. Ideal for applications requiring flexibility and high conductivity in electrical wiring setups.
2205212-1
TE Connectivity
TE Connectivity's 2205212-1 is a solid construction cable with Nomex insulator, rated for 200V and -40 to 125°C. Featuring 8 conductors of 28 AWG wire gauge, it supports up to 1.6A current. Ideal for power and signal applications in various electrical systems.
U3A00057-3M
Infinite Electronics International
U3A00057-2M
L-com
35108BK199
Alpha Wire
Alpha Wire 35108BK199 is a stranded wire with polyethylene jacket, shielding, and tin finish. Rated for 300V, it has PVC insulation and operates b/w -30 to 80°C. Ideal for flexible cords and fixtures due to its copper alloy conductor, 0.326 mm2 area, and 7X30 stranding.
P570-003-MICRO
Tripp Lite
2273107-4
TE Connectivity's 2273107-4 is a communication cable with 22 AWG wire gauge, rated for 250V DC and 4A current. It operates b/w -40°C to 80°C, suitable for straight mounting with M12 screw option. Ideal for electrical wiring applications requiring reliable performance in various environments.
UC-20AMM-QA8A01
Amphenol
Amphenol UC-20AMM-QA8A01 cable features UL approval, PVC jacket, and shielding. With USB C to USB A connectors, 24 AWG wire gauge, and 4 conductors, it's ideal for data transfer in various electrical applications.
44A0111-22-2
TE Connectivity's 44A0111-22-2 wire is stranded with tin finish, rated for 600V. With a conductor made of copper alloy, it has a diameter of 1.19mm and operates b/w -65 to 150°C. Ideal for general purpose applications, this flexible cord and fixture wire is lightweight and has a cross-sectional area of 0.38 mm².
P005-006
Tripp Lite P005-006 power cable, rated 250V, 15A, with IEC-320-C14 to IEC-320-C13 connectors. Ideal for PC, monitor, server, PDU, and UPS applications. Operating temperature range: -20°C to 60°C.
M22759/34-22-9
Allied Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; No. of Conductors: 1; Diameter: .052 mm; Additional Features: STANDARD: MIL-W-22759/34;
3080WH005
Alpha Wire's 3080WH005 is a CE, CSA, and UL approved stranded wire with a rated voltage of 600V. Featuring tin-coated copper alloy conductor, PVC insulation, and operating temperatures from -40 to 105°C, it is ideal for flexible cord and fixture wire applications.
12507
Helukabel
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Conductor Material: BARE COPPER; Maximum Operating Temperature: 80 Cel; Approvals (V): CE; CSA; EAC; UL;
21382
Helukabel 21382 is a control cable with CE and UL approvals, made of polyurethane jacket material. It has a rated voltage of 600V, suitable for offshore applications. With a temperature range from -40 to 80°C, it features bare copper conductor material and a cross-section area of 120mm².
DPA00006-2M
152660984
Molex 152660984 is a FLAT FLEXIBLE CABLE with 27 conductors, rated for 60V and 0.5A. It operates b/w -40°C to 105°C, making it suitable for various electrical applications requiring a compact 0.305mm length cable with high flexibility and durability.
5855RD005
5855RD005 by Alpha Wire is a MIL-approved stranded wire with silver finish. Featuring PTFE insulation, it's ideal for electronic, medical, and military applications. With a rated voltage of 600V and operating temperature range from -60 to 200°C, this flexible cord and fixture wire in AWG 22 offers 0.326 mm2 cross-section area.
151670321
Molex 151670321 flat cable with 16 conductors, rated for 60V and 0.5A. Constructed with tin-finished copper alloy conductors and polyester insulator. UL approved, suitable for applications requiring -40 to 105 °C operating temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
135101-02-M0.25
135101-02-M1.00
135101-04-M1.00
135110-02-M0.25
135110-01-M0.75
135103-02-03.00
135111-03-M0.25
135101-04-M0.50
135111-03-M0.50
135111-03-M0.75
135101-01-M0.75
135101-01-M0.25
135101-02-72.00
135103-02-M0.25
135104-01-M0.75
135103-01-M0.25
135101-R2-03.00
Amphenol's 135101-R2-03.00 is a shielded communication cable with 500V rating, 3.58mm diameter, and 0.076mm length. It features SMA PLUG connectors on both sides and is ideal for various electrical applications requiring reliable signal transmission.
135101-07-72.00
135101-R2-M1.00
CABLE ASSEMBLY; Connector Side-1: SMA PLUG 132102; Connector Side-2: SMA PLUG 132102; Rated Voltage: 500 V; Shielding: YES; No. of Conductors: 1;
135111-04-M0.75
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved