Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Terminal Pitch (mm): 2.54;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$2.113
$2.028
Corphita
Telecom & Datacom Connectors 44520-2003 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
44520-2003 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Wuxi Xuyang Electronic
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Sensitron Semiconductor
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS-7188S-A-NF-1-50
Bel Fuse
Bel Fuse SS-7188S-A-NF-1-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for board mounting at a pitch of 2.54mm. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
921
Keystone Electronics
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Minimum Operating Temperature: -25 Cel;
2-1734035-2
TE Connectivity
TE Connectivity 2-1734035-2 is a USB connector with GLASS FILLED POLYAMIDE9T insulator, NICKEL finish, and PHOSPHOR BRONZE shell. It has 5 contacts, rated for 1A signal current, and UL94V-0 flammability code. Ideal for board mounting in telecom/datacom applications due to its durability of 5000 cycles.
UJ31-CH-G1-SMT-TR
Cui Devices
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Body Width: .135 inch;
J0011D21BNL
Pulse Electronics
J0011D21BNL by Pulse Electronics is a Telecom & Datacom Connector with dimensions of 0.64" x 0.545" x 0.85". Featuring Matte Tin finish, it has 8 contacts and is used in board and panel mounting applications for telecom and datacom systems.
2250015-3
Bel Fuse's 2250015-3 is a telecom and datacom connector with a nickel shell finish and polyethylene insulator material. It features 8 contacts, solder termination type, and a jack body style. This connector is suitable for board and panel mounting in applications requiring UL 94V-0 flammability code compliance.
RJE73-188-00210
Amphenol
Amphenol RJE73-188-00210 is a telecom & datacom connector with 8 contacts, 0.635" x 0.443" x 0.594" dimensions, and POLYETHYLENE insulator. It features split board lock mounting, staggered PCB contact pattern, and solder termination. Ideal for telecom applications requiring right angle mounting on boards with 1.78mm row spacing.
1-2301994-1
TE Connectivity 1-2301994-1 is a telecom & datacom connector with EMI shielding. It features liquid crystal polymer insulator, nickel finish, and brass shell material. Ideal for board mounting with right-angle style, it has 8 contacts and operates b/w -40°C to 85°C.
HDRA-E68W2LFDT1EC-SL
Honda Tsushin Kogyo
HDRA-E68W2LFDT1EC-SL by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with 0.031" pitch, 1.681" body length, and 1000000000 ohm insulation resistance. It features a POLYPHENYLENE SULFIDE insulator, 250VAC dielectric voltage, and 0.3A signal current rating. Ideal for commercial applications requiring reliable board or panel mounting in right-angle configuration.
85508-5001
Molex
Molex 85508-5001 is a Telecom & Datacom Connector with 0.654" body length, 500000000 ohm insulation resistance, and matte tin over nickel termination. Ideal for board mounting applications in telecom and datacom systems, featuring glass-filled liquid crystal polymer insulator material and staggered PCB contact pattern.
RJHSE-5381-A1
Amphenol Communications Solutions
Amphenol RJHSE-5381-A1 is a telecom & datacom connector with 8 contacts, POLYETHYLENE insulator, and TIN shell finish. It operates b/w -55°C to 85°C, suitable for board mounting in telecommunications applications. Featuring a right-angle mounting style and staggered PCB contact pattern, it offers secure solder termination for female connectors.
SS-6466-NF
Bel Fuse SS-6466-NF is a Telecom & Datacom Connector with 6 GOLD contacts, POLYETHYLENE insulator, and NICKEL/TIN shell finish. Ideal for board mounting applications in telecom and datacom systems due to its FEMALE contact gender, RIGHT ANGLE mounting style, and COPPER ALLOY shell material.
940-SP-3088R-A133
The Bel Fuse 940-SP-3088R-A133 is a telecom & datacom connector with dimensions of 0.46" x 0.312" x 0.885". It features a polycarbonate insulator, 50u plating thickness, and UL 94V-0 flammability code. This plug connector has 8 contacts, IDC termination type, and is suitable for commercial telecom and datacom applications.
USB4125-GF-A
Global Connector Technology
USB4125-GF-A by Global Connector Technology is a USB connector with 6 contacts, rated at 4.25A signal current. It features a dielectric voltage of 100VAC, insulation resistance of 100MΩ, and operates b/w -30°C to 85°C. Ideal for telecom & datacom applications, it has a right-angle mounting style and surface mount termination type.
2007435-1
TE Connectivity 2007435-1 is a Telecom & Datacom Connector with 0.303" body length, 0.646" width, and 0.909" depth. It has 19 contacts, POLYETHYLENE insulator material, and operates b/w -20°C to 85°C. Ideal for board mounting applications in telecom and datacom systems.
5569284-1
TE Connectivity 5569284-1 is a Telecom & Datacom Connector with 0.615" body length, 0.65" width, and POLYAMIDE insulator. It has 500M ohm insulation resistance, Tin (Sn) termination finish, and operates b/w -40 to 85°C. Ideal for telecom applications due to its UL-rated design, polarized housing, and FEMALE contact gender.
632722110112
Wuerth Elektronik & Kg
632722110112 by Wurth Elektronik is a USB connector with 24 contacts, rated for 5A signal current. It features gold over nickel termination, liquid crystal polymer insulator, and stainless steel shell material. Ideal for telecom & datacom applications, it has an insulation resistance of 100M ohm and operates b/w -40 to 85°C.
UJ31-CH-3-MSMT-TR-67
Cui
Cui's UJ31-CH-3-MSMT-TR-67 USB connector features 24 contacts, POLYAMIDE46 insulator, and NICKEL shell finish. Ideal for telecom/datacom applications with a 100VAC dielectric voltage, -40 to 80°C operating range, and UL94V-0 flammability rating. Suitable for board mounting with a right-angle design and locking option for durability up to 10k cycles.
2086581051
Molex 2086581051 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. Featuring 19 contacts, it has a body size of 0.59" x 0.244" x 0.478". Ideal for board and panel mounting applications, it offers a max operating temperature of 85°C and durability of 10k cycles.
RJHSE-5380-04
Amphenol RJHSE-5380-04 is a 4-port telecom & datacom connector with 32 contacts. Features include matte tin termination, phosphor bronze contact material, and polyethylene insulator. Ideal for board mounting with right-angle style, suitable for commercial applications requiring UL standard compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved