Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 43640-0300 is a rectangular power connector with a mating contact pitch of 0.118". It has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications, it features a polarized housing, UL flammability rating, and can handle up to 5A signal current.
Median Price
$0.198
Lifecycle Status
Suppliers In-Stock
50
In-Stock Inventory
1k+
Avnet
1+ parts
$0.128
100+ parts
-
1k+ parts
10k+ parts
Verical
$0.186
$0.179
Adafruit Industries
$0.187
$0.178
Interstate Connecting
$0.194
$0.170
$0.164
Heilind Electronics
$0.197
$0.166
$0.156
Sager
$0.199
Master Electronics
$0.259
$0.235
$0.209
Farnell
$0.269
$0.168
$0.138
Mouser Electronics
$0.350
$0.270
$0.230
$0.214
Compona
$0.190
$0.150
Misumi USA
RS (Exports)
$0.360
$0.303
$0.257
Newark
$0.368
$0.283
$0.242
RS Americas
$0.416
$0.279
$0.229
DigiKey
$0.470
$0.281
$0.223
Element14
$0.642
$0.299
$0.251
PEI Genesis
TTI Europe
$0.176
$0.157
$0.145
Arrow
$0.188
Chip1Stop
$0.133
NEP Electronics
$0.144
TTI
$0.195
$0.160
Powell Electronics
$0.173
Distrelec
PSC Electronics
Freelance Electronics
$0.104
$0.110
$0.103
Digiode
$0.137
DF Sales Co.
$0.171
TestEquity
$0.200
Nova Conductors
$0.212
TME
$0.240
Maritex
$0.254
$0.174
FDH Electronics
$0.435
$0.395
$0.335
$0.311
Rutronik
$0.101
NAC Semi
$0.232
IBS Electronics
$0.208
Vyrian
VNN
PAR Electronics
SPM Sales
Elcom Components
Electro Sonic
$0.183
$0.155
Kallista Electronics Ltd
Inventory MP
Bristol Electronics
Bisco
Prism Electronics
Quittner & Schimek s.r.o.
Standard Data Resources
Semicontronic
$0.111
$0.108
Corphita
$0.130
Advanced Electronics
Argo Parts USA
$0.211
$0.205
Netroflash
$0.201
Continental Prestige Electronics
$0.440
$0.227
$0.181
Andel Nordic
$5.558
$5.335
Aztec Data Supply Inc.
$10.307
Perfect Parts
EMSNET (Excess)
Assy Fe
RC Electronics
$0.210
GreenTree Electronics
Kepictronics
Eastek
Abacus Technologies
Futuretech Components
ErreBi Group
Robosynatics
$0.975
Lucentia Tech
Amble Industries
0.118 - Allows for secure and reliable connection, ideal for power applications.
0.388 inch - Compact size for space-saving installation.
1000000000 ohm - Ensures high electrical integrity and safety.
0.665 inch - Provides ample room for wire termination.
POLYESTER - Offers durability and resistance to heat and chemicals.
105 - Suitable for a wide range of operating environments.
40 °C - Can withstand low temperature conditions.
RECTANGULAR POWER CONNECTOR - Designed specifically for power applications.
94V-0 - Meets strict safety standards for flammability.
POLARIZED HOUSING - Ensures correct and secure mating of connectors.
5 A - Capable of handling moderate current loads.
BLACK - Aesthetically pleasing and easy to identify.
UL - Meets industry standards for safety and performance.
3 - Allows for multiple connections in a single connector.
30 AWG - Compatible with a wide range of wire sizes.
30 Cycles - Designed for repeated use without deterioration in performance.
CABLE AND PANEL - Offers versatility in installation options.
20 AWG - Supports larger wire sizes for higher current applications.
CRIMP - Provides a secure and reliable connection method.
3.614 - Ensures connectors stay in place during operation.
MALE - Compatible with corresponding female connectors.
30 mohm - Ensures minimal loss of signal during transmission.
PLUG - Easy to connect and disconnect.
0.05 inch - Compatible with various insulation thicknesses.
SQ PIN-SKT - Provides a secure and stable connection.
11.5648 - Ensures secure mating of connectors.
0 inch - Compact design for space-saving installations.
RECTANGULAR - Designed for specific mating orientation.
COMMERCIAL - Suitable for a range of commercial applications.
Power Connectors 43640-0300 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Minimum Insulation Diameter:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
Minimum Withdrawal Force (N):
43640-0300 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Micro-Fit Resin 20/Aug/2010 Micro-Fit Test Summary 12/Aug/2010
PCN Assembly/Origin - Mult Devs Cancel Location Change 11/Jul/2022
PCN Other - 43640 Series Tooling 20/Jun/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
Semitron
M39029/56-351
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
50-84-1060
Molex
The Molex 50-84-1060 is a rectangular power connector with 6 contacts, rated at 11A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring reliable power connections in temperatures ranging from -55 to 105°C.
1-480318-0
TE Connectivity
TE Connectivity 1-480318-0 is a power connector with 0.53" body length, 0.295" width, and 0.86" depth. Insulation resistance of 500M ohm, operating temp range -55 to 105°C. Used in commercial applications for cable mounting with crimp termination.
15-24-6100
15-24-6100 by Molex is a rectangular power connector with 10 contacts, rated at 7A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
39-29-9049
The Molex 39-29-9049 is a rectangular power connector with 4 contacts, featuring a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. It has a body size of 0.38" x 0.38" x 0.5", suitable for board mounting applications. With a temperature range from -40 to 105°C, it offers reliable performance in commercial settings.
1-480319-0
TE Connectivity 1-480319-0 is a Power Connector with 0.61"x.33"x.94" dimensions, POLYAMIDE insulator, and -55 to 105°C operating temperature range. It has 2 contacts for crimp termination in cable mounting applications at 115/230VAC mains connector rating.
39-01-2040
Molex 39-01-2040 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable and panel mounting configurations.
39-30-1120
Molex 39-30-1120 is a rectangular power connector with 12 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.
1-640445-0
TE Connectivity 1-640445-0 is a rectangular power connector with 10 contacts, rated at 7A. Featuring a mating contact pitch of 0.156", it has an insulation resistance of 5Gohm and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and polarization key feature.
87427-1202
The Molex 87427-1202 is a rectangular power connector with 12 contacts, offering high insulation resistance of 1Gohm and dielectric voltage withstand of 1500VAC. With a temperature range from -40 to 105°C, it is ideal for board mounting applications requiring durable connections in commercial settings.
39-01-2126
The Molex 39-01-2126 is a rectangular power connector with 12 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. It is used in commercial applications for cable and panel mounting, featuring a durability of 30 cycles and operating temperatures from -40 to 105°C.
172310-1202
Molex 172310-1202 is a rectangular power connector with TIN over Nickel finish. Made of Liquid Crystal Polymer, it has 2 contacts and UL94V-0 flammability rating. Ideal for board mounting applications requiring male solder termination.
39-28-1123
The Molex 39-28-1123 is a rectangular power connector with 12 contacts, made of brass and tin copper finish. It has an insulation resistance of 1Gohm, dielectric voltage of 2200VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and reliability meeting CSA and UL standards.
39-01-2120
Molex 39-01-2120 is a rectangular power connector with 12 contacts, TIN finish, and polyamide66 insulator. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable female crimp connectors in cable and panel mounting setups.
39-01-4031
Molex 39-01-4031 is a rectangular power connector with 3 contacts, made of POLYAMIDE insulator material. It has a dielectric voltage rating of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications requiring high insulation resistance and UL94V-0 flammability compliance.
03-09-1094
Molex 03-09-1094 is a rectangular power connector with 9 contacts, POLYAMIDE insulator, and UL94V-2 flammability rating. It has a mating contact pitch of 0.198", suitable for commercial applications with operating temperatures ranging from -40°C to 105°C. Ideal for cable mounting with solder termination, this connector offers reliable performance in various industries.
2-917807-3
TE Connectivity 2-917807-3 is a RECTANGULAR POWER CONNECTOR with 6 contacts, GLASS FILLED POLYESTER insulator, and CRIMP termination. Operating from -55 to 105 °C, it has an Insulation Resistance of 1 Gohm. Used in commercial applications for power connections with UL94V-0 flammability rating.
FHP-03-02-T-S-TR
Samtec
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: TIN OVER NICKEL; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Contact Material: NOT SPECIFIED;
10-84-4090
Molex 10-84-4090 is a rectangular power connector with 9 contacts, Tin finish, and Polyamide66 insulator. It has an insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting in commercial applications due to its durability and UL certification.
15-24-6102
The Molex 15-24-6102 is a rectangular power connector with 10 contacts, rated at 7A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards compliant with CSA and UL regulations.
DF22L-2P-7.92DSA(53)
Hirose Electric
DF22L-2P-7.92DSA(53) by Hirose Electric is a POWER CONNECTOR with GLASS FILLED POLYAMIDE insulator. It has 2 contacts, operates b/w -55 to 85°C, and meets UL 94V-0 flammability standard. Ideal for board mounting applications requiring male socket connectors with blade pin-skt contact style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43640-0201
Molex 43640-0201 is a rectangular power connector with 0.118" contact pitch, suitable for commercial applications. It has a rated current of 5A and insulation resistance of 1Gohm, operating b/w -40 to 105°C. Ideal for cable and panel mounting, it features a polarized housing and durable design lasting up to 30 cycles.
43640-0200
The Molex 43640-0200 is a rectangular power connector with 2 contacts, rated for 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates in temperatures from -40 to 105°C. Ideal for cable and panel mounting applications requiring durable crimp terminations.
43640-0301
The Molex 43640-0301 is a rectangular power connector with a mating contact pitch of 0.118 inches and a body length of 0.388 inches. It has an insulation resistance of 1000000000 ohm and is commonly used in cable and panel applications.
43640-0400
The Molex 43640-0400 is a rectangular power connector with 4 contacts, rated for 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for cable and panel mounting applications requiring durable, polarized connectors with UL certification.
43640-1100
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; IEC Conformity: NO;
43640-0501
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 5; Contact Pattern: RECTANGULAR;
43640-0401
The Molex 43640-0401 is a rectangular power connector with 4 contacts, rated for 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for panel mounting applications requiring durable connections in commercial settings.
43640-1000
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Style: SQ PIN-SKT; Body Depth: .665 inch;
43640-0409
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
43645-0308
RECTANGULAR POWER CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-1: LOCKING; Maximum Insertion Force (N): 8.0064;
43640-0800
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Pattern: RECTANGULAR; Maximum Insertion Force (N): 11.5648;
43640-0500
The Molex 43640-0500 is a rectangular power connector with a mating contact pitch of 0.118 inches and a body length of 0.624 inches. It has an insulation resistance of 1,000,000,000 ohms and is commonly used in cable and panel applications.
43645-0208
RECTANGULAR POWER CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Resistance: 10 mohm; Body Depth: .551 inch;
43640-0600
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 6; Minimum Withdrawal Force (N): 3.614;
43640-0208
43640-0601
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; IEC Conformity: NO;
43645-0608
RECTANGULAR POWER CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Durability: 30 Cycles; Maximum Operating Temperature (Cel): 105;
43640-0309
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
43640-0701
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Additional Features: MICRO-FIT 3.0; Terminal Length: 0 inch;
43640-0900
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Resistance: 30 mohm; UL Flammability Code: 94V-0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved