Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 35021-1301 CONTACT features 30-24 AWG wire size, 0.059" cable entry. Ideal for right angle mounting with female contact gender. Made of phosphor bronze, suitable for various assembly applications.
Median Price
$0.123
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
$0.056
100+ parts
$0.015
1k+ parts
$0.014
10k+ parts
-
DigiKey
$0.100
$0.027
$0.021
Element14
$0.146
$0.121
$0.044
Mouser Electronics
$0.160
Chip1Stop
Newark
Verical
Master Electronics
Farnell
Powell Electronics
Digiode
$0.053
Vyrian
IBS Electronics
TME
VNN
Nova Conductors
Corphita
$0.050
Andel Nordic
$0.227
$0.218
EMSNET (Excess)
Assy Fe
Perfect Parts
Kepictronics
Continental Prestige Electronics
$0.020
Argo Parts USA
Netroflash
The ability to accommodate wires as small as 30 AWG offers versatility for different wiring applications.
Being able to handle wires up to 24 AWG ensures compatibility with a wide range of wire sizes commonly used in electronic assemblies.
With a maximum cable entry of 0.059 inch, this product can accommodate various cable sizes and configurations.
The female contact gender provides a secure and reliable connection when paired with a compatible male connector.
The right angle mounting style allows for space-saving and efficient installation in tight or compact spaces.
The square pin-socket contact style provides a reliable electrical connection and helps prevent accidental disconnection.
Phosphor bronze is known for its durability, corrosion resistance, and high electrical conductivity, making it an ideal material for electrical contacts.
Assembly Products 35021-1301 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Gender:
Contact Style:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Wire Size:
Minimum Wire Size:
PCN Packaging - Multiple Devices Box Packing Terminals 12/Apr/2015
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
Lite-on Semiconductor
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
DS18B20Z+T&R
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
WM-12S
TE Connectivity
TE Connectivity's WM-12S, part of Assembly Products, is designed for DTM SERIES applications. With a temperature range of -55 to 125 °C, it accommodates wires up to 0 AWG. Made of POLYBUTYLENE TEREPHTHALATE, it serves as a POWER AND SIGNAL WEDGE ITEM.
WM-6S
TE Connectivity's WM-6S is a power and signal assembly item designed for DTM SERIES. With a temp range of -55 to 125°C, it accommodates wires up to 0 AWG using polybutylene terephthalate material. Ideal for various applications requiring robust wire connections.
281934-2
TE Connectivity 281934-2 is a SEALING ITEM with Silicone material. It has a max operating temp of 130°C and min of -40°C. Supports up to 0 AWG wire size and 2.4" cable entry, ideal for various assembly applications.
12103881
Aptiv
CONNECTOR ACCESSORY; Material: COPPER ALLOY; DIN Conformity: NO; Maximum Cable Entry: .079 inch; MIL Conformity: NO; Additional Features: CONTACT FINISH: TIN;
W3S
W3S by TE Connectivity is an Assembly Product designed for DT SERIES applications. With a temperature range of -55 to 125°C, it supports up to 0 AWG wire size. Made of PBT material, it is ideal for power and signal assemblies requiring high durability.
L17DM53745-7
Amphenol
The Amphenol L17DM53745-7 is a male contact assembly product with a round pin-socket contact style made of brass. It has a rated current of 20A and can operate at temperatures up to 155°C. This straight mounting terminal type with 20 finish thickness is commonly used in industrial applications requiring reliable electrical connections.
0460-204-12141
TE Connectivity's 0460-204-12141 contact features crimp terminal type, machined contact design, and can handle wire gauge from 14 to 12 AWG. With a rated current of 25A, it is ideal for male contacts in straight mounting applications with temperatures ranging from -55 to 125°C.
206138-8
TE Connectivity's 206138-8 cable clamp has UL approval, shell size of 23, and max wire size of 0 AWG. It is made of polyethylene and mounts straight with a screw option. Ideal for securing cables in various assemblies.
02-08-1001
Molex
Molex 02-08-1001 is a CRIMP FEMALE CONTACT with SQ PIN-SKT style made of BRASS. It is used in Assembly Products for STRAIGHT mounting applications.
12066614
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Minimum Cable Entry: .039 inch; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO;
L17D204182LEX
CONNECTOR ACCESSORY;
0-0205090-1
TE Connectivity's 0-0205090-1 is a CRIMP terminal with COPPER ALLOY material. It supports wire sizes from 24 AWG to 20 AWG, rated for 7.5A current. Ideal for AMPLIMITE applications due to its SIGNAL design and operating temperatures ranging from -55°C to 125°C.
M24308/25-9F
Cinch Connectivity Solutions
CONNECTOR ACCESSORY; DIN Conformity: NO; Mounting Option-2: SCREW; MIL-Connector Accessory Name: SCREW ITEM; IEC Conformity: NO; Usage: M24308 SERIES CONNECTOR;
2002-1492
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: END PLATE; MIL Conformity: NO; IEC Conformity: NO;
3200548
Phoenix Contact
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Material: COPPER ALLOY; Approvals (V): CSA; UL; IEC Conformity: NO; Maximum Operating Temperature: 105 Cel;
1062-12-0166-PS
TE Connectivity's 1062-12-0166-PS is a FEMALE CRIMP CONTACT for CONNECTORS. It supports wire sizes from 14 AWG to 12 AWG with STAMPED design. The RND PIN-SKT style contact is ideal for STRAIGHT mounting in various assembly products.
W6S
The TE Connectivity W6S is an assembly product designed for the DT SERIES, with a max operating temp of 125°C and min of -55°C. It features a max wire size of 0 AWG, made from polybutylene terephthalate for power and signal applications. Ideal for various industries requiring high-quality electrical connections.
1-66103-4
TE Connectivity 1-66103-4 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for 20-24 AWG wires with 0.6 mm2 cross-section area. With a rated current of 13A, it operates b/w -55 to 150°C, making it ideal for power and signal applications.
13711546
Delphi Connection Systems
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Terminal Type: CRIMP; MIL Conformity: NO; Maximum Cable Entry: .063 inch;
1720630311
Molex 1720630311 CONTACT features CRIMP terminals, COPPER ALLOY material, and FEMALE contact gender. With a rated current of 23A and max operating temperature of 120°C, it is ideal for power applications with wire sizes ranging from 16 to 14 AWG.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
350218-1
TE Connectivity 350218-1 is a universal mate-n-lok plug and cap housing with crimp terminal type. It has a rated voltage of 600V, rated current of 19A, and wire gauge of 14AWG. Ideal for power applications, it features stranded construction, brass material, and approvals from CSA, UL, VDE.
350218-3
TE Connectivity 350218-3 is a UNIVERSAL MATE-N-LOK PLUG AND CAP HOUSING with CRIMP terminals. It has a rated voltage of 600V, rated current of 19A, and wire gauge range from 20 AWG to 14 AWG. Ideal for power applications with approvals from CSA, UL, and VDE.
35021-1160
Molex 35021-1160 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and RIGHT ANGLE mounting style. Ideal for use with 35022-00, 35023-00, and 68418 assemblies. Supports wire sizes from 28 AWG to 22 AWG with a 0.074 inch cable entry.
350218-2
TE Connectivity 350218-2 is a universal mate-n-lok plug and cap housing with approvals from CSA, UL, and VDE. It features a rated voltage of 600V, construction of stranded wire gauge up to 14 AWG, and a max operating temperature of 105°C. Ideal for power applications requiring male contact gender with crimp terminals.
35021-1101
CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; Contact Style: SQUARE PIN-SOCKET; Maximum Wire Size: 22 AWG;
35021-1110
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN-LEAD OVER COPPER; Maximum Cable Entry: .074 inch; Contact Gender: FEMALE; Maximum Wire Size: 22 AWG;
350200-1
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 17 A; Maximum Operating Temperature: 105 Cel; Design: POWER; Minimum Wire Size: 14 AWG;
350218-7
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; Approvals (V): CSA; UL; VDE; Wire Gauge (AWG): 14; Material: BRASS;
350218-6
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; Minimum Wire Size: 20 AWG; Wire Gauge (AWG): 14; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: NICKEL (50);
35021-1001
Molex 35021-1001 CONTACT features 28-22 AWG wire size, 0.074" cable entry, and brass material. Ideal for right angle mounting applications requiring female square pin-socket contacts.
35021-1360
CONNECTOR ACCESSORY; Contact Style: BELLOWED TYPE; Minimum Wire Size: 30 AWG; Maximum Wire Size: 24 AWG; Terminal Type: CRIMP; Finish Thickness: 118;
35021-1310
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN-LEAD OVER COPPER; Assembly Item Name: CONTACT; MIL Conformity: NO; IEC Conformity: NO; Contact Gender: FEMALE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved