Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 35021-1101 CONTACT features 28-22 AWG wire size, 0.074" cable entry, and square pin-socket style. Ideal for applications requiring right angle mounting with female contact gender. Made of phosphor bronze, suitable for assembly products.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Digiode
Nova Conductors
Vyrian
Andel Nordic
$2.915
$2.798
Semicontronic
$8.500
$8.288
$8.245
AZTECH Wire
$11.603
Corphita
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
This product is able to accommodate small wire sizes, making it versatile for various applications and installations.
With the ability to handle larger wire sizes as well, this product offers flexibility in usage and compatibility with different types of cables.
The generous maximum cable entry size allows for easy installation and connection of cables without the need for excessive force or adjustment.
The female contact gender ensures compatibility with a wide range of mating connectors and devices, making this product versatile for various applications.
The right angle mounting style offers flexibility in design and installation, allowing for space-saving and efficient use of the product in tight spaces or designs.
The square pin-socket contact style provides a secure and reliable connection, ensuring stable and consistent performance in various operating conditions.
Constructed with durable and corrosion-resistant phosphor bronze material, this product offers long-lasting performance and reliability in demanding environments or applications.
Assembly Products 35021-1101 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Gender:
Contact Style:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Wire Size:
Minimum Wire Size:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Diodes Incorporated
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1731110058
Molex
The Molex 1731110058 is a BACKSHELL assembly product designed for FCT D-SUB usage. It has a min cable entry of 0.315" and a max cable entry of 0.492". Made of zinc alloy, it can withstand temperatures ranging from -35°C to 100°C.
1-968851-1
TE Connectivity
TE Connectivity 1-968851-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 13 AWG and rated current of 22 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
33000-1003
Molex 33000-1003 is a male contact assembly product for MX150 connectors. It features crimp terminals, copper alloy material, and can handle up to 10A current at 500V DC. With operating temperatures from -40°C to 105°C, it accommodates wire sizes up to 22 AWG in straight mounting applications.
A3B-2630SCC
Hirose Electric
A3B-2630SCC by Hirose Electric is a CRIMP terminal CONTACT with FEMALE gender, suitable for STRAIGHT mounting. Made of PHOSPHOR BRONZE, it features BELLOWED contact style and 0.09" terminal length. Ideal for various assembly applications requiring reliable electrical connections.
39-00-0038
Molex 39-00-0038 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Suitable for 0.051-0.122 inch cable entries in STRAIGHT mounting style.
5748676-1
TE Connectivity 5748676-1 is a zinc alloy BACKSHELL with shielding, suitable for PLUG/RECEPTACLE applications. It supports cable entry from 0.185" to 0.32", operating in temperatures from -55°C to 105°C. Mounting options include #4-40 screws and it accommodates up to 0 AWG wire size.
39-00-0073
Molex 39-00-0073 is a POWER CONTACT with FEMALE gender, SQUARE PIN-SOCKET style. Made of BRASS material, it has a 0.169" terminal length and supports wire sizes from 24 AWG to 18 AWG. Ideal for use with 5557, 30067, 44516 or 42474 HOUSING assemblies.
16-02-0105
CONNECTOR ACCESSORY;
206966-7
TE Connectivity's 206966-7 cable clamp has UL approval, shell size of 13, and accommodates up to 0 AWG wire. Made of polyethylene, it mounts straight with a 0.453" cable entry. Ideal for securing cables in various applications.
1534809-1
TE Connectivity 1534809-1 backshell has 3 shell sizes, shielding, and 0.189" min cable entry. Ideal for applications requiring steel material, it accommodates up to 0 AWG wire size with 0.433" max cable entry. Mounting options include screw and 14702 for secure installation.
WP-2P
CONNECTOR ACCESSORY; MIL Conformity: NO; Maximum Operating Temperature: 125 Cel; IEC Conformity: NO; Material: POLYETHYLENE; DIN Conformity: NO;
AT06-3S-CAP
DF1B-2428SCA
DF1B-2428SCA by Hirose Electric is a CRIMP terminal CONTACT with FEMALE gender, made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for applications requiring reliable electrical connections in various assembly products.
MTCB1X-XXX-105
CONNECTOR ACCESSORY; Contact Gender: MALE; Maximum Wire Size: 0 AWG;
1053251004
M23053/5-103-9
3m Electronic Products Division
ASSEMBLY ITEMS; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN;
7810.6412.0
1-1743447-2
TE Connectivity 1-1743447-2 features COMPLIANT FIT terminals, STAMPED contact design, and supports wire sizes up to 0 AWG. With a temperature range of -40°C to 125°C, it is ideal for applications requiring reliable male contacts in assembly products.
206358-5
TE Connectivity's 206358-5 cable clamp has UL approval, shell size of 11, and accommodates up to 0 AWG wire. Ideal for straight mounting with a screw option, made of polyethylene material.
SVM-61T-P2.0
J S T Mfg
SVM-61T-P2.0 by J S T Mfg is a male contact assembly product for VL connectors, with approvals from CSA, TUV, and UL. It features crimp terminals suitable for 20-14 AWG wires, rated at 20A and 600V AC/DC. Operating temperatures range from -25 to 90°C making it ideal for various applications requiring reliable electrical connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
350218-1
TE Connectivity 350218-1 is a universal mate-n-lok plug and cap housing with crimp terminal type. It has a rated voltage of 600V, rated current of 19A, and wire gauge of 14AWG. Ideal for power applications, it features stranded construction, brass material, and approvals from CSA, UL, VDE.
350218-3
TE Connectivity 350218-3 is a UNIVERSAL MATE-N-LOK PLUG AND CAP HOUSING with CRIMP terminals. It has a rated voltage of 600V, rated current of 19A, and wire gauge range from 20 AWG to 14 AWG. Ideal for power applications with approvals from CSA, UL, and VDE.
35021-1160
Molex 35021-1160 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and RIGHT ANGLE mounting style. Ideal for use with 35022-00, 35023-00, and 68418 assemblies. Supports wire sizes from 28 AWG to 22 AWG with a 0.074 inch cable entry.
350218-2
TE Connectivity 350218-2 is a universal mate-n-lok plug and cap housing with approvals from CSA, UL, and VDE. It features a rated voltage of 600V, construction of stranded wire gauge up to 14 AWG, and a max operating temperature of 105°C. Ideal for power applications requiring male contact gender with crimp terminals.
35021-1110
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN-LEAD OVER COPPER; Maximum Cable Entry: .074 inch; Contact Gender: FEMALE; Maximum Wire Size: 22 AWG;
350200-1
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 17 A; Maximum Operating Temperature: 105 Cel; Design: POWER; Minimum Wire Size: 14 AWG;
350218-7
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; Approvals (V): CSA; UL; VDE; Wire Gauge (AWG): 14; Material: BRASS;
350218-6
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; Minimum Wire Size: 20 AWG; Wire Gauge (AWG): 14; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: NICKEL (50);
35021-1301
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Maximum Cable Entry: .059 inch; Minimum Wire Size: 30 AWG; Contact Gender: FEMALE; Maximum Wire Size: 24 AWG;
35021-1001
Molex 35021-1001 CONTACT features 28-22 AWG wire size, 0.074" cable entry, and brass material. Ideal for right angle mounting applications requiring female square pin-socket contacts.
35021-1310
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN-LEAD OVER COPPER; Assembly Item Name: CONTACT; MIL Conformity: NO; IEC Conformity: NO; Contact Gender: FEMALE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved