Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 26-60-6022 is a board connector with 2 contacts, gold finish, and 1000VAC dielectric voltage. It has a 0.394" body width and 0.446" depth, suitable for commercial applications with -40 to 80°C operating temperature range. Ideal for headers & edge connectors in white color with UL certification.
Median Price
$0.462
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$0.425
1k+ parts
$0.398
10k+ parts
-
Nova Conductors
Digiode
$0.439
Vyrian
VNN
Semicontronic
$0.393
$0.383
$0.381
Continental Prestige Electronics
$0.390
Argo Parts USA
$0.386
Netroflash
Corphita
$0.416
Advanced Electronics
Andel Nordic
$7.272
$6.981
Aztec Data Supply Inc.
$8.430
AZTECH Wire
$11.901
High insulation resistance ensures reliable connection and prevents electrical leakage.
Compact body width allows for space-saving installation on the board.
Withstanding high voltage ensures safe and durable performance.
Gold contact finish ensures optimum conductivity and corrosion resistance.
Ideal body depth provides a secure fit on the board.
Polyester insulator material offers excellent electrical insulation properties.
Single row loading simplifies installation and use.
PEG mounting option ensures stable and secure attachment to the board.
High maximum operating temperature enables reliable performance in various environments.
Low minimum operating temperature ensures functionality in extreme cold conditions.
Specifically designed for board connections, ensuring compatibility and reliable performance.
UL 94V-0 flammability rating provides fire safety compliance.
White insulator color allows for easy identification and organization on the board.
Conforms to UL standards, ensuring quality and safety in design and manufacturing.
Two contacts provide a simple and efficient connection.
Single connector simplifies installation and maintenance.
Specific contact arrangement enhances connectivity and signal transmission.
Withstand up to 25 cycles of connecting and disconnecting without compromising performance.
Designed for board mounting, offering a secure and stable connection.
Standard terminal pitch ensures compatibility with a wide range of boards.
Solder termination allows for a secure and reliable connection.
Male contact gender ensures compatibility with female connectors.
Low contact resistance ensures efficient signal transmission and minimal loss.
Receptacle body style provides a secure and protected connection point.
Straight mounting style makes installation straightforward and hassle-free.
Square pin socket contact style offers a reliable and secure connection.
Locking mounting option ensures a secure and stable connection.
Commercial-grade reliability for consistent performance in professional applications.
Headers & Edge Type Connectors 26-60-6022 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
26-60-6022 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Gold Plating Removal 01/Aug/2011
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Good-ark Electronics
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Thinking Electronic Industrial
SSW-106-01-T-D
Samtec
Samtec SSW-106-01-T-D is a 2-row, 12-contact board connector with a mating contact pitch of 0.1". It features liquid crystal polymer insulator material and matte tin finish over nickel. Ideal for PCB applications requiring reliable female socket connectors with solder termination in commercial settings.
26-60-4020
Molex
The Molex 26-60-4020 is a board connector with 0.156" mating contact pitch, suitable for commercial applications. Featuring a 7A signal current rating, it has a durable design with 25 cycles of use and operates b/w 0°C to 75°C temperature range. The connector uses tin finish on brass contacts and offers high insulation resistance of 1Gohm.
SFW4S-2STE1LF
Amphenol Communications Solutions
The Amphenol SFW4S-2STE1LF is a 4-contact FFC/FPC connector with 0.039" pitch, tin finish, and UL94V-0 rating. It is designed for surface mount board applications, featuring female contacts in a straight mounting style. Ideal for compact electronic devices requiring reliable signal transmission.
VHR-5N-BK
J S T Mfg
VHR-5N-BK by J S T Mfg is a 5-contact female board connector with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation, it has an operating temperature range of -25 to 85 °C and offers high insulation resistance at 1G ohm. Ideal for commercial applications requiring reliable connections in black housings.
MEC1-130-02-F-D-RA1-SL
Samtec's MEC1-130-02-F-D-RA1-SL is a 2-row, 60-contact card edge connector with a mating contact pitch of 0.039". It features tin termination finish and gold flash over nickel mating finish. Ideal for commercial applications requiring a right-angle, surface-mount female socket connector on PCBs.
B2B-XH-A-GU
B2B-XH-A-GU by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and TIN finish. It has a terminal pitch of 2.5mm and is used for BOARD mounting applications requiring male connectors with solder termination.
746-068-520-601
Edac
Edac 746-068-520-601 is a 68-contact card edge connector with 0.125" pitch, suitable for PCB mounting. It features a dielectric voltage of 1500VAC, insulation resistance of 5Gohm, and operating temperatures from -40 to 105°C. Ideal for applications requiring high current signal transmission in black insulator color with UL94V-0 flammability rating.
15-91-1142
Molex 15-91-1142 is a 14-contact board connector with 0.1" pitch, suitable for commercial applications. Features include GLASS FILLED LIQUID CRYSTAL POLYMER insulator, 105°C max operating temp, and 15u plating thickness. Ideal for PCB mounting with solder holding posts, this male connector has a rectangular contact pattern and UL94V-0 flammability rating.
640456-2
TE Connectivity
TE Connectivity 640456-2 is a BOARD CONNECTOR with 0.1" pitch, suitable for commercial applications. Features BRASS contacts, TIN finish, and GLASS FILLED POLYESTER insulator material. Rated for 5A signal current with operating temperatures from -55 to 105°C.
803-87-054-30-001101
Preci-dip Sa
803-87-054-30-001101 by Preci-dip Sa is a BOARD CONNECTOR with 54 contacts, featuring BERYLLIUM COPPER contact material and GOLD FLASH mating finish. It has a terminal pitch of 2.54mm and is designed for surface mount applications in headers & edge type connectors.
B4B-PH-K-S
B4B-PH-K-S by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2mm and is used for board mounting applications requiring male connectors with solder termination.
53047-1010
Molex 53047-1010 is a board connector with 10 contacts, 0.049" pitch, and 0.561" body length. Ideal for commercial applications, it features polarized housing, solder termination, and UL94V-0 flammability rating.
5103308-1
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mounting Type: BOARD; Mating Contact Finish: GOLD FLASH OVER PALLADIUM NICKEL (15)/GOLD (15) OVER NICKEL (50);
FTSH-105-01-L-DV-P-TR
Samtec's FTSH-105-01-L-DV-P-TR is a 2-row, 10-contact board connector with a contact pitch of 1.27mm. Featuring gold mating contacts over nickel, it has a temperature range of -55 to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
BM06B-SRSS-TBT(LF)(SN)
BM06B-SRSS-TBT(LF)(SN) by J S T Mfg is a 6-contact board connector with copper alloy contacts and tin over copper finish. It is a straight mounting style, surface mount termination type suitable for applications requiring UL 94V-0 flammability code compliance in headers & edge type connectors.
XHP-6
XHP-6 by J S T Mfg is a 6-contact board connector with 0.098" pitch, suitable for cables with 22-30 AWG wires. Featuring POLYAMIDE6 insulation and UL94V-0 flammability rating, it offers 1000VAC dielectric strength and operates b/w -25 to 85°C. Ideal for applications requiring a polarized housing and female contact gender.
B5P-VH(LF)(SN)
B5P-VH(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.156" pitch, 1500VAC dielectric voltage, and 10A signal current. It features POLYAMIDE66 insulation, BRASS contacts with Tin finish, and operates b/w -25 to 85 °C. Ideal for PCB applications requiring high insulation resistance and UL94V-0 flammability rating.
1-640456-4
TE Connectivity 1-640456-4 is a board connector with 14 contacts, 0.1" pitch, and tin finish. It has a body size of 1.4"x0.425"x0.225" and operates b/w -55°C to 105°C. Ideal for commercial applications requiring a polarized, rectangular contact pattern with a rated current of 5A.
S3B-XH-A-1(LF)(SN)
S3B-XH-A-1(LF)(SN) by J S T Mfg is a 3-contact board connector with brass contacts and tin finish. It has a terminal pitch of 2.5mm, suitable for right-angle mounting on boards. Ideal for applications requiring reliable male connectors in tight spaces.
22-04-1021
Molex 22-04-1021 header connector features 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board connections in applications requiring a durable, polarized housing with male SQ pin-skt contacts.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
26-60-4030
Molex 26-60-4030 is a board connector with 3 contacts, featuring matte tin finish and glass-filled polyester insulator. With 1000000000 ohm insulation resistance, it offers durability of 25 cycles. Ideal for commercial applications requiring reliable connections in straight mounting style.
26-60-4040
Molex 26-60-4040 is a board connector with 4 contacts, 0.156" pitch, and 1500VAC dielectric voltage. Ideal for commercial applications, it features polyester insulation, brass contacts, and -40 to 105°C operating temperature range.
26-60-6100
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
26-60-4050
The Molex 26-60-4050 is a board connector with 5 contacts, featuring a body length of 0.774", insulation resistance of 1G ohm, and termination contact finish of matte tin over nickel. It is used in applications requiring a durable male connector with solder termination, suitable for commercial reliability standards.
26-60-6120
The Molex 26-60-6120 is a board connector with 12 contacts, TIN finish, and 1000VAC dielectric voltage. It has a 0.394" body width and 0.446" depth, suitable for commercial applications with -40 to 80°C operating range. The header connector features UL94V-0 white polyester insulator material and offers reliable performance with 25 cycles durability.
26-60-6110
The Molex 26-60-6110 is a board connector with 11 contacts, featuring insulation resistance of 1Gohm and dielectric voltage withstand of 1000VAC. With a body width of 0.394" and termination finish in tin (Sn), it is ideal for commercial applications requiring reliable connections at temperatures ranging from -40 to 80°C.
26-60-4060
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; MIL Conformity: NO;
26-60-4100
The Molex 26-60-4100 is a board connector with 10 contacts, 0.156" pitch, and 1.554" body length. It has an insulation resistance of 50Gohm, operates b/w -40 to 105°C, and withstands up to 1500VAC. Ideal for commercial applications requiring reliable signal connections on PCBs.
26-60-4043
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Termination Type: SOLDER; DIN Conformance: NO;
26-60-5020
Molex 26-60-5020 is a board connector with 2 contacts, featuring brass contact material and matte tin over nickel finish. With a body length of 0.306", it offers high insulation resistance of 1G ohm. Ideal for commercial applications, this right-angle receptacle has a terminal pitch of 3.96mm and durability of 25 cycles.
26-60-4042
The Molex 26-60-4042 is a 1-row loaded board connector with 4 contacts and a terminal pitch of 3.96mm. It has a UL flammability code of 94V-0 and is suitable for solder termination. This connector is commonly used in various applications requiring male contact gender and straight mounting style.
26-60-3030
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Type: BOARD;
26-60-3070
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulator Color: NATURAL;
26-60-3050
The Molex 26-60-3050 is a board connector with 5 contacts, featuring a body length of 0.774" and body width of 0.13". It has an insulation resistance of 1G ohm, contact material made of brass, and termination finish in matte tin over nickel. Ideal for commercial applications requiring a durable right-angle mounting style.
26-60-4140
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
26-60-3040
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 4;
26-60-6050
26-60-3080
Molex 26-60-3080 is a 1.242" x 0.13" board connector with 8 contacts, featuring matte tin over nickel finish and polyester insulator. It has an insulation resistance of 1G ohm, contact resistance of 10 mohm, and durability of 25 cycles. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
26-60-6081
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved