Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Mating Contact Finish: NOT SPECIFIED; Contact Material: BRASS;
Median Price
$7.010
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Verical
1+ parts
100+ parts
$6.770
1k+ parts
$6.650
10k+ parts
$6.040
Mouser Electronics
$10.600
$8.530
$6.310
-
Master Electronics
$5.910
$5.700
$5.200
Nova Conductors
$4.310
Digiode
$7.078
Vyrian
VNN
Continental Prestige Electronics
$4.224
Argo Parts USA
Netroflash
$4.094
$4.008
AZTECH Wire
$6.321
Corphita
$6.705
Aztec Data Supply Inc.
$10.658
Andel Nordic
$32.630
$22.843
Power Connectors 26-01-3144 attributes and parameters. Explore more Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
JESD-609 Code:
26-01-3144 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
PCN Other - 5569, 44130 Series Tooling 17/Sep/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Digitron Semiconductors
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Dc Components
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Eic Semiconductor
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
FHP-03-02-T-S-A-K-TR
Samtec
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
39-01-2205
Molex
Molex 39-01-2205 is a rectangular power connector with 20 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It has a body length of 1.701", width of 0.46", and depth of 0.77". Ideal for cable mounting applications requiring high insulation resistance (1Gohm) and UL94V-0 flammability rating.
1460G3
Anderson Power Products
1460G3 by Anderson Power Products is a RECTANGULAR POWER CONNECTOR with 8 contacts, UL 94V-0 rated. It supports CRIMP and SOLDER terminations, suitable for CABLE AND PANEL mounting. Ideal for applications requiring HERMAPHRODITIC contact gender in power connections.
43045-0218
Molex 43045-0218 is a rectangular power connector with insulation resistance of 1Gohm, dielectric voltage of 1000VAC, and operating temp range from -40 to +105°C. Ideal for board mounting applications in commercial settings due to its durable design and bright tin finish contacts.
43045-1006
Molex 43045-1006 is a rectangular power connector with 10 contacts, rated at 2.5A signal current. It features LCP insulator material, tin-plated brass contacts, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and UL certification.
2008750006
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1053101206
Molex 1053101206 is a RECTANGULAR POWER CONNECTOR with 6 contacts, Tin finish, and Liquid Crystal Polymer insulator. It is used for board mounting applications requiring male solder termination. UL94V-0 rated for high flammability resistance.
42820-5223
Molex 42820-5223 is a rectangular power connector with 5 contacts, featuring insulation resistance of 1Gohm and dielectric voltage of 2200VAC. Ideal for board mounting applications, it has a durable design with matte tin finish and glass-filled nylon insulator material.
15-24-7100
15-24-7100 by Molex is a rectangular power connector with 10 contacts, featuring a body length of 0.87", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for board mounting applications, it has a contact material of brass and insulator material of Polyamide66.
350431-1
TE Connectivity
TE Connectivity's 350431-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It features 6 contacts, rated at 12A, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with tin finish contacts.
1-917658-3
TE Connectivity 1-917658-3 is a rectangular power connector with 12 contacts, rated at 8A. It features a body length of 1.551", insulation resistance of 100MΩ, and operates b/w -55°C to 105°C. Ideal for board mounting applications requiring durable connectors with solder termination.
1720430802
RECTANGULAR POWER CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN; Mating Contact Finish: NOT SPECIFIED; Contact Material: COPPER ALLOY;
B2P-VH-B(LF)(SN)
J S T Mfg
B2P-VH-B(LF)(SN) by J S T Mfg is a POWER CONNECTOR with dimensions of 0.309" x 0.335" x 0.429". It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, BRASS contacts, and operates b/w -25°C to 85°C. Ideal for BOARD mounting applications requiring a reliable male SQ PIN-SKT contact style.
43045-1212
Molex 43045-1212 is a rectangular power connector with 12 contacts, rated at 5A signal current. It features liquid crystal polymer insulation, bright tin over nickel finish, and brass contact material. Suitable for board mounting with a mating contact pitch of 0.118", it has an operating temperature range from -40 to 105°C.
39-31-0068
The Molex 39-31-0068 is a rectangular power connector with 6 contacts, featuring a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. With a temperature range from -40 to 105°C, it is ideal for board mounting applications requiring durability and reliability.
1723103105
Molex 1723103105 power connector has dimensions of 0.818" x 0.352" x 0.614". Made of liquid crystal polymer, it operates b/w -40°C to 105°C. With 5 contacts, it is used for board mounting applications in UL-rated systems.
1-1123722-8
TE Connectivity 1-1123722-8 is a RECTANGULAR POWER CONNECTOR with 8A rated current, POLYAMIDE66 insulator material, and 1500VAC dielectric voltage. Ideal for BOARD mounting applications in commercial settings due to its durability, high insulation resistance of 1Gohm, and operating temperature range from -25 to 105°C.
IPL1-103-01-L-D-K
Samtec IPL1-103-01-L-D-K is a rectangular power connector with 6 contacts. It features gold shell finish, solder termination, and phosphor bronze contact material. Ideal for board mounting applications in temperatures ranging from -55°C to 125°C.
1700010110
Molex 1700010110 is a rectangular power connector with 10 contacts, POLYBUTYLENE TEREPHTHALATE insulator, and UL reference standard. It has a body length of 1.148", insulation resistance of 1000000000 ohm, and features crimp termination for cable mounting applications.
39-30-0120
Molex 39-30-0120 is a rectangular power connector with 12 contacts, POLYAMIDE66 insulator, and 100u plating thickness. It has a dielectric voltage of 1500VAC and operates b/w -40 to 105 °C. Ideal for board mounting applications requiring durable male connectors with solder termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
26-01-3115
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mounting Type: BOARD; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
26-01-3114
The Molex 26-01-3114 is a rectangular power connector with a body length of 0.21" and insulation resistance of 1G ohm. Featuring a dielectric voltage of 1500VAC, it is ideal for board mounting applications requiring durability and reliability in commercial settings. With matte tin over nickel finish, this female connector has a contact material of brass and can handle up to 13A signal current.
26-01-3127
RECTANGULAR POWER CONNECTOR; Contact Material: BRASS; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3;
26-01-3128
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body Width: .38 inch; Mixed Contacts: NO;
26-01-3116
Molex 26-01-3116 is a rectangular power connector with 6 contacts, made of brass and featuring matte tin finish. With a body size of 0.54" x 0.396" x 0.759", it operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to UL certification and natural insulator color.
26-01-3141
RECTANGULAR POWER CONNECTOR; JESD-609 Code: e3; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
26-01-3143
RECTANGULAR POWER CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE; Body or Shell Style: RECEPTACLE;
26-01-3148
26-01-3177
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3; Contact Material: BRASS;
26-01-3126
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved