Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 22-12-4112 is a board connector with 11 contacts and a terminal pitch of 2.54mm. It features a matte tin finish with a nickel barrier for termination contact, making it suitable for soldering applications. This right-angle mounting style connector is commonly used in headers and edge type connectors.
Median Price
$1.570
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
VNN
Vyrian
Digiode
Argo Parts USA
$1.450
Netroflash
$1.492
$1.460
Aztec Data Supply Inc.
$9.643
Semicontronic
$12.500
$12.188
$12.125
AZTECH Wire
$12.843
Corphita
The matte tin finish with a nickel barrier ensures excellent conductivity and corrosion resistance, making this connector ideal for long-lasting and reliable connections.
The board connector design provides a secure and stable connection between the circuit board and other components, guaranteeing a robust and efficient electrical connection.
Constructed with high-quality brass material, this connector offers superior strength and durability, ensuring a reliable and long-lasting performance.
With a 94V-0 flammability rating, this product demonstrates outstanding fire resistance properties, providing an added level of safety and reliability.
Featuring 11 contacts, this connector offers ample connections for various electrical components, making it suitable for complex circuit applications.
The board mounting type allows for easy installation and secure attachment to the circuit board, making it convenient for assembly and maintenance.
The 2.54mm terminal pitch ensures compatibility with a wide range of standard spacing requirements, making it versatile and compatible with various electronic devices and applications.
The solder termination type provides a reliable and permanent connection between the connector and the circuit board, ensuring stable and consistent performance.
The male contact gender allows for compatibility with female connectors, enabling seamless integration and connectivity in electronic systems.
The right-angle mounting style offers flexible and space-saving installation options, making it suitable for applications with limited space constraints.
Headers & Edge Type Connectors 22-12-4112 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
22-12-4112 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
LM7805CT/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Fairchild Semiconductor
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
B2BZR(LF)(SN)
J S T Mfg
B2BZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" pitch, 500VAC dielectric voltage, and 1A signal current rating. Ideal for commercial applications, it features GLASS FILLED POLYAMIDE insulation, BRASS contacts with SN finish, and operates b/w -25 to 85 °C temperatures.
53048-0610
Molex
Molex 53048-0610 is a board connector with 6 contacts, featuring a mating contact pitch of 0.049" and insulation resistance of 100M ohm. Ideal for commercial applications, it has a right-angle mounting style and solder termination, operating b/w -40°C to 85°C.
GHR-08V-S
GHR-08V-S by J S T Mfg is an 8-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable connections in electronic devices.
2199230-4
TE Connectivity 2199230-4 is a CARD EDGE CONNECTOR with POLYETHYLENE insulator. It has 67 contacts, 0.02" pitch, and operates b/w -40 to 80°C. Ideal for board mounting applications requiring FEMALE compression contacts in a RIGHT ANGLE configuration.
B4B-PH-K-S-GW
B4B-PH-K-S-GW by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, 2A signal current rating, and 800VAC dielectric voltage. Ideal for applications requiring a male SQ PIN-SKT contact style, such as PCB connections in electronics with operating temperatures ranging from -25 to 85 °C.
35362-0350
Molex 35362-0350 is a board connector with 3 contacts, featuring a mating contact pitch of 0.079" and body dimensions of 0.382" x 0.217" x 0.335". It uses TIN over copper termination for reliability in commercial applications.
SFW6S-2STE1LF
Amphenol Communications Solutions
SFW6S-2STE1LF by Amphenol is a FFC/FPC connector with 0.039" pitch, 500000000 ohm insulation resistance, and 5000VAC dielectric voltage. Ideal for board mounting applications in commercial settings due to its durability, surface mount termination, and 1A signal current rating.
43645-0600
The Molex 43645-0600 is a board connector with 6 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for commercial applications requiring durable connections, this header connector has a polyester insulator and UL94V-0 flammability rating.
5-146280-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 6; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
53398-0671
Molex 53398-0671 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a male blade pin-skt contact style and surface mount termination on a straight receptacle body for durability in PCB mounting.
SHR-08V-S-B
SHR-08V-S-B by J S T Mfg is a BOARD CONNECTOR with 8 contacts, POLARIZED HOUSING, and 1A signal rating. It features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring a reliable FEMALE connector with CRIMP termination.
BM08B-GHS-TBT(LF)(SN)(N)
BM08B-GHS-TBT(LF)(SN)(N) by J S T Mfg is an 8-contact board connector with TIN over copper finish. It features phosphor bronze contact material, UL 94V-0 flammability code, and 1.25mm terminal pitch for surface mount termination. Ideal for applications requiring male gender connectors in straight mounting style on circuit boards.
SHR-14V-S-B
SHR-14V-S-B by J S T Mfg is a 14-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
71600-010LF
71600-010LF by Amphenol is a board connector with 10 contacts, 2 rows, and a mating contact pitch of 0.1". It features an insulation resistance of 50G ohm, operates b/w -65 to 105°C, and has a durability of 100 cycles. Ideal for commercial applications requiring reliable signal connections in tight spaces.
70553-0002
Molex 70553-0002 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and operating temperature range of -40 to 105°C. Ideal for right-angle mounting on PCBs with rectangular contact pattern.
640456-4
TE Connectivity 640456-4 is a board connector with 0.1" pitch, suitable for commercial applications. It features TIN finish, 5A signal current rating, and GLASS FILLED POLYESTER insulator material. Ideal for use in electronics requiring a male contact gender and straight mounting style.
22-11-2042
Molex 22-11-2042 is a board connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring brass contacts, matte tin finish, and polyamide insulator material, it offers high durability with 50 cycles. With a rated current of 4A and operating temperature range from 0 to 75°C, it meets UL and CSA standards for commercial applications.
68612214122
Wuerth Elektronik & Kg
68612214122 by Wurth Elektronik is a FFC/FPC connector with 22 contacts, 0.039" pitch, and 1A signal current rating. Ideal for board mounting applications, it features polyphenylene sulfide insulation material and tin over nickel contact finish. Operating b/w -25°C to 85°C, it offers high durability with 25 cycles and meets UL standards for reliability.
803-43-038-10-003000
Mill-max Mfg
803-43-038-10-003000 by Mill-max Mfg is a 2-row, 38-contact board connector with gold finish. Featuring a terminal pitch of 2.54mm, it is solder termination and female gendered for socket applications on boards.
BM05B-GHS-TBT(LF)(SN)(N)
BM05B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.049" pitch, POLYAMIDE insulator, and 500VAC dielectric voltage. Ideal for commercial applications, it features PHOSPHOR BRONZE contacts, TIN finish, and operates b/w -25 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-12-2061
The Molex 22-12-2061 is a board connector with mating contact pitch of 0.1", insulation resistance of 50G ohm, and dielectric voltage rating of 1500VAC. It is used in applications requiring a durable, right-angle mounting style for commercial reliability.
22-12-2031
The Molex 22-12-2031 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.29 inch. It has an insulation resistance of 50G ohm and can withstand a dielectric voltage of 1500VAC. This connector is commonly used in commercial applications requiring reliable signal transmission.
221-2504
Wpi Garry Electronics
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Length: 1.225 inch; No. of Rows Loaded: 1; Body Width: .105 inch;
Eaton Corporation
The Eaton Corporation 221-2504 is a board connector with 0.075" mating contact pitch, ideal for commercial applications. Featuring a polyamide insulator, this plug-style connector has 4 female contacts in a rectangular pattern. With dimensions of 1.225" x 0.105" x 0.456", it offers reliable connectivity in headers & edge type connectors.
221-2513
The Eaton Corporation 221-2513 is a board connector with 13 female contacts in a plug-style body. Featuring a mating contact pitch of 0.075", it has dimensions of 1.9" x 0.105" x 0.456". Made of POLYAMIDE, this header connector is commonly used in commercial applications for its reliability and rectangular contact pattern.
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .105 inch; Total No. of Contacts: 13; Insulator Material: POLYAMIDE;
22-12-2024
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO;
22-12-2044
The Molex 22-12-2044 is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 1000000000 ohm. It is used in applications requiring a durable, right angle mounting style for commercial reliability.
221-2515
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 15; Body or Shell Style: PLUG; Body Length: 2.05 inch;
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Pattern: RECTANGULAR; Body Length: 2.05 inch; Body Depth: .456 inch;
221-2512
Eaton Corporation's 221-2512 is a board connector with 12 female contacts at 0.075" pitch. Featuring a polyamide insulator, it has dimensions of 1.825"x0.105"x0.456". Ideal for commercial applications requiring reliable rectangular plug connections.
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Rows Loaded: 1; Mating Contact Pitch (inch): 0.075; Manufacturer Series: 221;
221-2511
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Pitch (inch): 0.075; Contact Pattern: RECTANGULAR; Total No. of Contacts: 11;
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 11; Insulator Material: POLYAMIDE; Manufacturer Series: 221;
221-2514
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .105 inch; Contact Pattern: RECTANGULAR; No. of Rows Loaded: 1;
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Manufacturer Series: 221; Body Length: 1.975 inch; Body Depth: .456 inch;
22-12-2054
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Length: .141 inch;
22-12-2164
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
22-12-2124
Molex 22-12-2124 is a board connector with 12 contacts, 0.1" pitch, and 2.54mm terminal pitch. It features TIN over nickel finish, brass contacts, and polyamide insulator for applications requiring a rated current of 2.5A in commercial settings at temperatures ranging from -40 to 105°C.
22-12-4032
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved