Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 43645-0500 is a board connector with 5 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. It is commonly used in commercial applications requiring durable connectors with crimp terminations for cable mounting.
Median Price
$0.348
Lifecycle Status
Suppliers In-Stock
52
In-Stock Inventory
1k+
Arrow
1+ parts
$0.153
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
$0.194
$0.170
$0.154
Avnet
$0.199
Heilind Electronics
$0.210
$0.177
$0.166
Sager
$0.213
$0.162
Chip1Stop
$0.218
$0.150
$0.148
$0.147
Adafruit Industries
$0.220
$0.209
Element14
$0.339
RS (Exports)
$0.430
$0.364
$0.308
Distrelec
$0.432
$0.411
$0.389
Mouser Electronics
$0.450
$0.250
$0.216
RS Americas
$0.505
$0.384
DigiKey
$0.510
$0.335
$0.263
Newark
$0.575
$0.392
$0.337
Misumi USA
$0.610
TTI
TTI Europe
$0.259
NEP Electronics
PEI Genesis
Farnell
$0.418
Verical
$0.357
PSC Electronics
Digiode
$0.145
DF Sales Co.
$0.193
TestEquity
$0.230
Nova Conductors
$0.236
Component Electronics Inc.
$0.500
$0.380
$0.330
Maritex
$0.662
$0.399
$0.319
NAC Semi
$0.447
ComSIT Distribution GmbH
ComSIT USA
Vyrian
IBS Electronics
$0.217
$0.201
Sensible Micro Corp
TME
$0.438
$0.349
Classic Components Corporation
Jameco Electronics
VNN
Diverse Electronics
Prism Electronics
Lantek
Elcom Components
Cyclops Electronics Ltd
Inventory MP
EMSNET
Semi Source
Connector Distribution Corp
Right Parts Inc.
PC Components Company LLC
Bristol Electronics
Brevan Electronics
Semicontronic
$0.130
$0.127
$0.126
Corphita
$0.138
Advanced Electronics
Netroflash
Argo Parts USA
$0.229
Andel Nordic
$7.083
$6.800
Aztec Data Supply Inc.
$10.664
Perfect Parts
EMSNET (Excess)
RC Electronics
Eastek
Assy Fe
Abacus Technologies
Kepictronics
Authorized Procurement Solutions
GreenTree Electronics
Infinite Electronics LLP (Excess)
Continental Prestige Electronics
$0.678
ErreBi Group
Robosynatics
Lucentia Tech
$0.205
SIE Connect GmbH (Excess)
Standard Data Resources (Excess)
The close contact pitch allows for more compact design and better signal transmission efficiency.
The optimal body length provides a good balance between space-saving and functionality.
High insulation resistance ensures reliable and safe operation of the connector.
The high maximum operating temperature provides versatility and reliability in different environments.
The black insulator color adds a sleek and professional look to the connector.
Headers & Edge Type Connectors 43645-0500 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
43645-0500 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Micro-Fit Test Summary 12/Aug/2010 Micro-Fit Resin 20/Aug/2010
PCN Assembly/Origin - Mult Devs Cancel Location Change 11/Jul/2022
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Dc Components
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
Shandong Yiguang Electronic Joint Stock
Microchip Technology
B6B-EH-A(LF)(SN)
J S T Mfg
B6B-EH-A(LF)(SN) by J S T Mfg is a 6-contact male board connector with 0.098" mating contact pitch, 0.689" body length, and 0.15" body width. It features gold mating contact finish, solder termination type, and polyamide66 insulator material. Ideal for applications requiring a straight mounting style and rectangular contact pattern.
XHP-2-E
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
52271-1679
Molex
The Molex 52271-1679 is a FFC/FPC connector with 16 contacts, rated at 0.5A signal current. It has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 750VAC. Ideal for board mounting applications, it features a polyamide insulator material and operates b/w -40 to 85°C temperature range.
22-29-2061
The Molex 22-29-2061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and rated current of 4A. It has a body length of 0.6", body width of 0.23", and operates b/w temperatures of 0 to 75°C. This connector is ideal for applications requiring reliable signal transmission on PCBs in commercial settings.
5-103961-9
TE Connectivity
TE Connectivity 5-103961-9 is a board connector with 10 contacts, rated at 3A signal current. It features a body length of 2", insulation resistance of 5G ohm, and dielectric voltage of 600VAC. Ideal for applications requiring a temperature range from -65 to +105°C.
B4B-XH-AM
B4B-XH-AM by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2.5mm and is UL 94V-0 rated. Ideal for board mounting applications requiring male connectors with solder termination.
61303211021
Wuerth Elektronik & Kg
61303211021 by Wurth Elektronik is a BOARD CONNECTOR with 32 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.1", it has gold (Au) - nickel (Ni) finish and operates b/w -40 to 125 °C. Ideal for commercial applications requiring high insulation resistance and UL certification.
1761606-3
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Manufacturer Series: 1761606; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
17211101102
Harting Electronics & Kg
17211101102 by Harting Electronics & Kg is a board connector with 110 female contacts in a right-angle mounting style. It features a mating contact pitch of 0.079", body length of 1.965", and termination contact finish of gold over nickel. Ideal for applications requiring high-density PCB connections with precise rectangular patterns and press-fit terminations.
52030-0829
The Molex 52030-0829 FFC/FPC connector has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 500VAC. It is used in applications requiring a durable, straight-mounting female connector with staggered PCB contact pattern for commercial reliability.
BM06B-SRSS-TB(LF)(SN)
BM06B-SRSS-TB(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.039" pitch, 100M ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCB applications requiring male SQ PIN-SKT contacts in a polarized housing with surface mount termination.
ASP-134488-01
Samtec
Samtec ASP-134488-01 is a 10-row, 400-contact board connector with 0.05" pitch and liquid crystal polymer insulator. It features gold over nickel mating contacts, straight mounting style, and surface mount termination. Ideal for commercial applications requiring high-density connections on PCBs.
50-37-5043
The Molex 50-37-5043 is a board connector with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 0.217" body width. It has a dual polarized polarization key and is rated for 3A signal current. This female receptacle connector with crimp termination is ideal for commercial applications requiring reliable connections in the temperature range of -40 to 105°C.
FTSH-105-01-L-DV-K-TR
Samtec's FTSH-105-01-L-DV-K-TR is a 2-row, 10-contact board connector with a contact pitch of 0.05". Featuring TIN over nickel finish, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable male connectors in black insulator material.
FH12A-40S-0.5SH(55)
Hirose Electric
FH12A-40S-0.5SH(55) by Hirose Electric is a FFC/FPC connector with 40 contacts, gold termination finish, and 500M ohm insulation resistance. It operates b/w -40 to 85°C, has a mating pitch of 0.02", and is used in board mounting applications requiring high durability and reliability.
357-074-422-278
Edac
Edac 357-074-422-278 is a Card Edge Connector with 74 contacts, 0.156" pitch, and 5A signal rating. It has a dielectric voltage of 2545VAC and operates b/w -40 to 105°C. Ideal for board and panel mounting applications requiring high insulation resistance and UL certification.
1410187-3
TE Connectivity's 1410187-3 header connector features a mating contact pitch of 0.07", insulation resistance of 1Gohm, and operates b/w -55 to 105°C. With a total of 112 contacts in a polarized design, it is ideal for board-to-board connections in commercial applications requiring durability and reliability.
640250-5
TE Connectivity 640250-5 is a board connector with 0.156" mating contact pitch, 100000000 ohm insulation resistance, and -55 to 105 °C operating temperature range. It has 5 contacts for cable mounting applications, featuring female crimp terminals and glass-filled polyamide insulator material.
B3P-VH-FB-B(LF)(SN)
B3P-VH-FB-B(LF)(SN) by J S T Mfg is a 3-contact board connector with 0.156" pitch, ideal for applications requiring straight mounting. Featuring tin over copper finish and brass contacts, it has a body size of 0.535" x 0.382" x 0.433". The UL 94V-0 rated connector uses solder termination and glass-filled polybutylene terephthalate insulator material.
22-01-2027
Molex 22-01-2027 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a body length of 0.222", insulation resistance of 1000000000 ohm, and operating temperature range from -40 to 105 °C, it offers reliable performance in various commercial applications requiring a durable and high-quality female contact design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43645-0200
The Molex 43645-0200 is a board connector with a mating contact pitch of 0.312". It features an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications, this female connector has a durability of 30 cycles and uses crimp termination on cables.
43645-0300
The Molex 43645-0300 is a board connector with a mating contact pitch of 0.118". It has a body length of 0.388" and insulation resistance of 1,000,000,000 ohm. This connector is commonly used in commercial applications and has a max operating temperature of 105°C.
43645-0400
Molex 43645-0400 is a board connector with 4 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring durable female connectors with crimp termination in black polyester insulator material.
43645-0600
The Molex 43645-0600 is a board connector with 6 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for commercial applications requiring durable connections, this header connector has a polyester insulator and UL94V-0 flammability rating.
43645-0800
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
43645-0700
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE;
43645-1100
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: CABLE;
43645-0900
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Reference Standard: UL;
43645-1000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mixed Contacts: NO;
43645-1200
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved