Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 22-12-2084 is a board connector with 8 contacts, rated at 4A signal current. Featuring a mating contact pitch of 0.1", it has a body length of 0.8" and insulation resistance of 1Gohm. Ideal for commercial applications, this right-angle receptacle connector has a solder termination type and operates b/w 0-75°C.
Median Price
$1.092
Lifecycle Status
Suppliers In-Stock
43
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.580
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$0.646
$0.542
$0.526
Sager
$0.812
$0.638
RS (Exports)
$0.990
$0.780
Arrow
$1.024
$0.875
$0.773
$0.706
Chip1Stop
$1.070
Interstate Connecting
$1.094
$0.891
$0.866
Avnet
$1.123
Verical
$1.220
$1.180
$1.150
DigiKey
$1.880
$1.326
Mouser Electronics
$2.130
$1.430
$1.120
TTI
$0.665
$0.652
Master Electronics
$1.130
$1.090
$1.080
TTI Europe
$0.622
Farnell
$1.400
Powell Electronics
Element14
$1.450
$1.330
$1.270
Newark
$1.650
$1.410
Digiode
$0.530
Nova Conductors
$0.982
DF Sales Co.
$1.690
Component Electronics Inc.
$1.920
$1.440
$1.250
Flip Electronics
IBS Electronics
$1.382
$1.325
$1.297
Vyrian
VNN
Electronic Expediters
Rebound Electronics
Extreme Components
R&J Components
PC Components Company LLC
Bisco
Classic Components Corporation
Bristol Electronics
Inventory MP
Quantum Digital Technology
Prism Electronics
Elcom Components
GSS - Global Semi Support
First Choice Components Inc.
A2Z Electronics, Inc.
Semi Source
Semicontronic
$0.422
$0.411
$0.409
Corphita
$0.502
Argo Parts USA
$0.941
Netroflash
Continental Prestige Electronics
$1.680
$1.050
$0.834
Aztec Data Supply Inc.
$2.431
Andel Nordic
$51.080
$35.754
Perfect Parts
Authorized Procurement Solutions
Kepictronics
EMSNET (Excess)
Assy Fe
Glotronic Ltd.
The tight mating contact pitch of 0.1 inch ensures a secure and reliable connection between the connector and the board.
The compact body length of 0.8 inch makes the connector suitable for applications where space is limited.
High insulation resistance of 1000000000 ohm ensures minimal leakage and interference, leading to better overall performance.
With a maximum operating temperature of 75°C, this connector can withstand high temperatures without any degradation in performance.
The 20u plating thickness provides good conductivity and corrosion resistance, ensuring a longer lifespan for the connector.
With a durability of 50 cycles, this connector can withstand multiple insertions and removals without any compromise in performance.
Headers & Edge Type Connectors 22-12-2084 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
22-12-2084 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
PCN Packaging - Multiple Devices Quantity 11/Apr/2019 Multiple Devices Quantity Retraction 23/Jul/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Digitron Semiconductors
Taiwan Semiconductor
Goodwork Semiconductor
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Taitron Components
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
78172-0004
Molex
Molex 78172-0004 is a board connector with 0.047" pitch, GOLD finish, and 100000000 ohm insulation resistance. Ideal for commercial applications, it has a temperature range of -25 to 85 °C and can handle up to 1.5A signal current in cable mounting setups.
851-43-030-30-002000
Mill-max Mfg
The Mill-max Mfg 851-43-030-30-002000 is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 1.27mm and is designed for SURFACE MOUNT applications. Ideal for use in electronic devices requiring FEMALE SOCKET connectors on PCBs.
B2B-XH-A-E(LF)(SN)
J S T Mfg
B2B-XH-A-E(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for commercial applications, this connector has a rated current of 3A and operates b/w -25 to 85 °C temperatures.
66506-353LF
Amphenol Communications Solutions
Amphenol's 66506-353LF is a 2-row, 34-contact board connector with UL94V-0 flammability rating. Featuring 2.54mm terminal pitch and solder termination, it is ideal for straight mounting applications in headers & edge type connectors.
B6B-ZR(LF)(SN)
B6B-ZR(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.059" pitch, GLASS FILLED POLYAMIDE66 insulator, and 500VAC dielectric voltage. It operates b/w -25 to 85 °C, suitable for applications requiring high insulation resistance and UL94V-0 flammability rating.
1-640456-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; JESD-609 Code: e3; Mounting Type: BOARD;
S3B-XH-A-1(LF)(SN)
S3B-XH-A-1(LF)(SN) by J S T Mfg is a 3-contact board connector with brass contacts and tin finish. It has a terminal pitch of 2.5mm, suitable for right-angle mounting on boards. Ideal for applications requiring reliable male connectors in tight spaces.
S2B-ZR-SM4A-TF(LF)(SN)
S2B-ZR-SM4A-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" pitch, 500VAC Dielectric Withstanding Voltage, and -25 to 85 °C operating range. Ideal for applications requiring POLARIZED HOUSING, RECTANGULAR PCB Contact Pattern, and SURFACE MOUNT Termination Type.
ASP-134486-01
Samtec
Samtec ASP-134486-01 is a 10-row, 400-contact board connector with 0.05" pitch and gold over nickel finish. It features liquid crystal polymer insulator, surface mount termination, and polarized housing for commercial applications requiring high reliability.
PHR-3
PHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with POLYAMIDE66 insulator. It has 0.079" contact pitch, 800VAC dielectric voltage, and -25 to 85 °C operating temp range. Ideal for CABLE mounting, it features FEMALE contacts with 20 mohm resistance and 0.019" min insulation diameter.
BM04B-GHS-TBT(LF)(SN)(N)
BM04B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, 0.049" pitch, and 100000000 ohm insulation resistance. It has POLYAMIDE9T insulator material, operates b/w -25 to 85 °C, and features TIN/CU termination finish. Ideal for applications requiring a male contact gender in surface mount configuration with a rectangular PCB contact pattern.
DM3D-SF
Hirose Electric
The Hirose Electric DM3D-SF is a CARD EDGE CONNECTOR with 0.043" Mating Contact Pitch, 500VAC Dielectric Withstanding Voltage, and 1000000000 ohm Insulation Resistance. It features a LIQUID CRYSTAL POLYMER insulator material and is suitable for commercial applications requiring a durable connector with FEMALE contact gender in RIGHT ANGLE mounting style.
87438-0443
The Molex 87438-0443 is a board connector with 4 contacts, featuring a mating contact pitch of 0.059" and insulation resistance of 1G ohm. It has a body length of 0.287", operates b/w -55 to 105°C, and is ideal for commercial applications requiring a durable, polarized housing with matte tin finish.
7-215079-6
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Board Mounting Option: SOLDERABLE RETENTION CLIPS; Insulator Color: RED;
50-57-9403
Molex 50-57-9403 is a board connector with 0.1" pitch, suitable for commercial applications. It features a body length of 0.299", insulation resistance of 10^10 ohm, and operating temperature range from -40 to 105°C. Ideal for use in cable mounting scenarios with crimp termination and female contact gender.
XAP-02V-1
XAP-02V-1 by J S T Mfg is a 2-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts, PLUG body style, and CRIMP termination. Ideal for CABLE mounting applications in Headers & Edge Type Connectors category.
22-23-2081
The Molex 22-23-2081 is a board connector with 8 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1Gohm. It has a body length of 0.794", body width of 0.25", and insulator material made from polyamide. This connector is commonly used in commercial applications requiring reliable connections on PCBs.
5055960601
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
5023520400
The Molex 5023520400 is a board connector with a mating contact pitch of 0.079 inches and a body length of 0.472 inches. It has an insulation resistance of 1,000,000,000 ohms and is commonly used in commercial applications for its durability and right angle mounting style.
SHR-14V-S-B
SHR-14V-S-B by J S T Mfg is a 14-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-12-2061
The Molex 22-12-2061 is a board connector with mating contact pitch of 0.1", insulation resistance of 50G ohm, and dielectric voltage rating of 1500VAC. It is used in applications requiring a durable, right-angle mounting style for commercial reliability.
22-12-2031
The Molex 22-12-2031 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.29 inch. It has an insulation resistance of 50G ohm and can withstand a dielectric voltage of 1500VAC. This connector is commonly used in commercial applications requiring reliable signal transmission.
221-2504
Wpi Garry Electronics
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Length: 1.225 inch; No. of Rows Loaded: 1; Body Width: .105 inch;
Eaton Corporation
The Eaton Corporation 221-2504 is a board connector with 0.075" mating contact pitch, ideal for commercial applications. Featuring a polyamide insulator, this plug-style connector has 4 female contacts in a rectangular pattern. With dimensions of 1.225" x 0.105" x 0.456", it offers reliable connectivity in headers & edge type connectors.
221-2513
The Eaton Corporation 221-2513 is a board connector with 13 female contacts in a plug-style body. Featuring a mating contact pitch of 0.075", it has dimensions of 1.9" x 0.105" x 0.456". Made of POLYAMIDE, this header connector is commonly used in commercial applications for its reliability and rectangular contact pattern.
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .105 inch; Total No. of Contacts: 13; Insulator Material: POLYAMIDE;
22-12-2024
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO;
22-12-2044
The Molex 22-12-2044 is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 1000000000 ohm. It is used in applications requiring a durable, right angle mounting style for commercial reliability.
221-2515
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 15; Body or Shell Style: PLUG; Body Length: 2.05 inch;
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Pattern: RECTANGULAR; Body Length: 2.05 inch; Body Depth: .456 inch;
221-2512
Eaton Corporation's 221-2512 is a board connector with 12 female contacts at 0.075" pitch. Featuring a polyamide insulator, it has dimensions of 1.825"x0.105"x0.456". Ideal for commercial applications requiring reliable rectangular plug connections.
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Rows Loaded: 1; Mating Contact Pitch (inch): 0.075; Manufacturer Series: 221;
221-2511
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Pitch (inch): 0.075; Contact Pattern: RECTANGULAR; Total No. of Contacts: 11;
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 11; Insulator Material: POLYAMIDE; Manufacturer Series: 221;
221-2514
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .105 inch; Contact Pattern: RECTANGULAR; No. of Rows Loaded: 1;
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Manufacturer Series: 221; Body Length: 1.975 inch; Body Depth: .456 inch;
22-12-2054
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Length: .141 inch;
22-12-2164
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
22-12-2124
Molex 22-12-2124 is a board connector with 12 contacts, 0.1" pitch, and 2.54mm terminal pitch. It features TIN over nickel finish, brass contacts, and polyamide insulator for applications requiring a rated current of 2.5A in commercial settings at temperatures ranging from -40 to 105°C.
22-12-4032
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved