Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 22-11-2082 board connector features a mating contact pitch of 0.1", insulation resistance of 50 Gohm, and dielectric voltage rating of 1500VAC. It is used in applications requiring a durable header & edge type connector with solder termination, suitable for commercial reliability standards.
Median Price
$0.812
Lifecycle Status
Suppliers In-Stock
56
In-Stock Inventory
1k+
Arrow
1+ parts
$0.534
100+ parts
$0.503
1k+ parts
$0.479
10k+ parts
-
Sager
$0.637
$0.500
Heilind Electronics
$0.681
$0.556
$0.539
Adafruit Industries
$0.694
Interstate Connecting
$0.790
$0.662
$0.625
Avnet
$0.811
Verical
$0.890
$0.850
RS Americas
$1.200
$0.900
$0.720
DigiKey
$1.390
$0.977
$0.771
$0.669
Mouser Electronics
$1.500
$1.130
$0.937
$0.825
Newark
$1.150
$0.982
TTI
$0.770
RS (Exports)
$0.857
$0.667
Chip1Stop
$0.814
$0.692
$0.620
TTI Europe
$0.646
Master Electronics
$1.320
$0.918
$0.817
Farnell
$0.953
Powell Electronics
$0.760
$0.690
$0.570
Freelance Electronics
$0.354
Digiode
$0.507
DF Sales Co.
$0.700
Nova Conductors
$0.728
Component Electronics Inc.
$0.580
TME
$1.400
$0.800
Vyrian
VNN
Next Level Components, LLC
Classic Components Corporation
Inventory MP
IBS Electronics
$1.001
$0.959
$0.931
SPM Sales
Technoshack Inc.
Sea View Technologies
Atlantic Semiconductor
Legend Electronics Inc.
Mil-Aero Solutions, Inc.
Bristol Electronics
A2Z Electronics, Inc.
Semtec, LLC
Prism Electronics
Netsource Technology, Inc.
North Shore Components
EPE Components Inc.
J & M Industries LLC
Semi Source
Sunrise Surplus Inc.
EMSNET
Elcom Components
Resion
PC Components Company LLC
Inland Empire Components Inc.
J2 Sourcing AB
Sensible Micro Corp
Bisco
$1.319
ComSIT Distribution GmbH
Semicontronic
$0.454
$0.443
$0.440
Corphita
$0.481
Continental Prestige Electronics
$0.659
$0.645
Argo Parts USA
$0.639
Advanced Electronics
Aranea Global
$0.713
$0.684
Aztec Data Supply Inc.
$9.528
Andel Nordic
$39.220
$27.453
Perfect Parts
Authorized Procurement Solutions
Kepictronics
GreenTree Electronics
Assy Fe
The close proximity of contacts allows for high density connections on a circuit board, making this product ideal for applications with limited space.
With a high insulation resistance, this connector provides reliable connection and reduces the risk of electrical leakage, ensuring safe operation.
The high dielectric voltage rating enables this connector to withstand high voltage levels, making it suitable for use in applications where voltage spikes may occur.
The matte tin finish over nickel provides a durable and corrosion-resistant surface for the contacts, ensuring long-term performance and reliability.
The slim body depth makes this connector suitable for applications where space is limited and a compact design is required.
The use of polyamide as the insulator material offers excellent thermal and chemical resistance, making this connector suitable for a wide range of operating environments.
With a high maximum operating temperature, this connector can withstand elevated temperatures without compromising performance, making it suitable for use in demanding environments.
The low minimum operating temperature ensures that this connector remains operational even in cold conditions, making it versatile and reliable in various environments.
The board connector design allows for secure and stable connections to a PCB, providing consistent electrical performance and ease of installation.
The use of brass as the contact material ensures good conductivity and durability, making this connector a reliable choice for long-term use.
Headers & Edge Type Connectors 22-11-2082 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
22-11-2082 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
PCN Packaging - Multiple Devices Packaging 09/May/2016
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
Meritek Electronics
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
VHR-5N
J S T Mfg
VHR-5N by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.156" pitch, 1500VAC voltage withstand, and 1000000000 ohm insulation resistance. Ideal for cable mounting applications, it features POLYAMIDE insulator material and operates b/w -25 to 85 °C.
50-57-9003
Molex
The Molex 50-57-9003 is a board connector with a mating contact pitch of 0.1 inch. It has a body width of 0.099 inch and depth of 0.6 inch, making it suitable for various applications in headers & edge type connectors. Its insulator material is glass filled polyester, and it has a total of 3 contacts with female SQ PIN-SKT contact style.
22-03-2031
Molex 22-03-2031 is a BOARD CONNECTOR with 3 contacts, rated at 4A signal current. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 50Gohm and operates b/w -40 to 75°C. Ideal for commercial applications, this connector uses solder termination and has a durability of 25 cycles.
2-2013289-1
TE Connectivity
TE Connectivity 2-2013289-1 is a card edge connector with 204 contacts, gold finish, and polyethylene insulator. It has a mating contact pitch of 0.024", operates b/w -55 to 85°C, and rated for 0.5A signal current. Ideal for board mounting applications requiring durable connectors with right-angle mounting style.
B8B-PH-K-S(LF)(SN)
B8B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and 800VAC dielectric voltage. Ideal for applications requiring a male contact gender, RECTANGULAR PCB pattern, and POLYAMIDE66 insulator material.
22-03-5035
The Molex 22-03-5035 is a board connector with a mating contact pitch of 0.098", insulation resistance of 1Gohm, and dielectric voltage rating of 1000VAC. It is used in applications requiring a durable, polarized housing with male contacts for signal currents up to 3A. The connector has UL94V-0 flammability rating and operates b/w -40°C to 105°C, making it suitable for commercial reliability standards.
776286-1
TE Connectivity's 776286-1 is a 3-row board connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has a max operating temp of 125°C, -40°C min temp, and rated current of 17A. Ideal for cable mounting applications requiring a polarized, UL-rated female plug with strain relief option.
324-91-164-41-002000
Mill-max Mfg
BOARD CONNECTOR; Termination Contact Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e0; Contact Material: BERYLLIUM COPPER;
B6B-EH-A(LF)(SN)
B6B-EH-A(LF)(SN) by J S T Mfg is a 6-contact male board connector with 0.098" mating contact pitch, 0.689" body length, and 0.15" body width. It features gold mating contact finish, solder termination type, and polyamide66 insulator material. Ideal for applications requiring a straight mounting style and rectangular contact pattern.
53261-0671
The Molex 53261-0671 is a board connector with 6 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.049", it has an insulation resistance of 100M ohm and operates b/w -40°C to 105°C. Ideal for applications requiring a durable, right-angle mounting style with surface mount termination.
B13B-PH-K-S(LF)(SN)
B13B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 1.098" length, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with 2A signal current, operating b/w -25°C to 85°C.
VHR-9N
VHR-9N by J S T Mfg is a 9-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts, RIGHT ANGLE mounting style, and CRIMP termination type. Ideal for CABLE mounting applications in Headers & Edge Type Connectors category.
B3B-PH-K-S(LF)(SN)
B3B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator, operates b/w -25 to 85 °C, and features TIN contact finish. Ideal for applications requiring reliable board-to-board connections in electronic devices.
S2B-ZR-SM4A-TF(LF)(SN)
S2B-ZR-SM4A-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" pitch, 500VAC Dielectric Withstanding Voltage, and -25 to 85 °C operating range. Ideal for applications requiring POLARIZED HOUSING, RECTANGULAR PCB Contact Pattern, and SURFACE MOUNT Termination Type.
6420-9200
3m Electronic Products Division
3M Electronic Products Division's 6420-9200 is a 20-contact board connector with 2 rows, 0.1" pitch, and glass-filled polyester insulator. It features UL94V-0 flammability rating, solder termination, and straight mounting style. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
43025-1600
The Molex 43025-1600 is a board connector with 16 contacts, rated at 2.5A signal current. It has a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring reliable connections in tight spaces.
FTSH-110-01-L-DV-K-P
Samtec
Samtec's FTSH-110-01-L-DV-K-P is a 2-row, 20-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator material and phosphor bronze contacts with gold finish, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount termination on PCBs.
FTSH-110-01-L-DV-K-TR
Samtec's FTSH-110-01-L-DV-K-TR is a 2-row, 20-contact board connector with a contact pitch of 1.27mm and body dimensions of 0.5" x 0.135" x 0.241". It features phosphor bronze contacts with gold finish, suitable for commercial applications requiring a temperature range of -55 to 125°C.
853-93-010-20-001000
Mill-max Mfg 853-93-010-20-001000 is a 10-contact, dual-row board connector with tin/lead finish. Featuring beryllium copper contacts, it's ideal for right-angle mounting on boards. This socket connector has a pitch of 1.27mm and is suitable for various electronic applications.
22-27-2031
The Molex 22-27-2031 is a BOARD CONNECTOR with 3 contacts, POLYAMIDE insulator, and BRASS contact material. It has a mating pitch of 0.1", operates b/w 0-75°C, and features a tin finish. Ideal for commercial applications requiring a durable connector with white insulator color and UL94V-0 flammability rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-11-2022
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Plating Thickness (inch): 20u;
22-11-2122
22-11-2042
Molex 22-11-2042 is a board connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring brass contacts, matte tin finish, and polyamide insulator material, it offers high durability with 50 cycles. With a rated current of 4A and operating temperature range from 0 to 75°C, it meets UL and CSA standards for commercial applications.
22-11-2021
Molex 22-11-2021 is a BOARD CONNECTOR with 2 contacts, 2.54mm pitch, and UL 94V-0 flammability rating. Ideal for solder termination in applications requiring male connectors on straight mounting style boards.
22-11-2032
Molex 22-11-2032 is a board connector with 3 contacts, 0.1" pitch, and matte tin finish. Ideal for commercial applications, it offers high durability with 50 cycles and operates b/w 0°C to 75°C temperature range. The connector features a polarized housing, UL flammability rating of 94V-0, and solder termination for reliable performance.
22-11-2026
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
22-11-2028
Molex 22-11-2028 is a board connector with gold over nickel termination. Featuring 2 contacts at 2.54mm pitch, it is UL 94V-0 rated for high flammability resistance. Ideal for applications requiring male connectors on boards, offering straight mounting style and solder termination.
2211S-02G
Neltron Industrial
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mating Contact Finish: GOLD; Total No. of Contacts: 2;
Spc Technology/ Multicomp
2211S-02G by Spc Technology/Multicomp is a BOARD CONNECTOR with 2 contacts, 2.54mm pitch, and SOLDER termination. It is ideal for applications requiring a MALE connector with STRAIGHT mounting on a board.
22-11-1021
Molex 22-11-1021 is a board connector with 0.098" mating contact pitch, suitable for commercial applications. It features gold over nickel termination finish, 1000VAC dielectric voltage, and -40 to 105°C operating temperature range. Ideal for use in electronics requiring reliable signal transmission with a rated current of 3A.
22-11-2062
The Molex 22-11-2062 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.594 inch. It has an insulation resistance of 1000000000 ohm and can withstand a dielectric voltage of 1000VAC. This connector is commonly used in commercial applications due to its durability and reliability.
22-11-2052
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Type: BOARD;
22-11-2102
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
22-11-1041
22-11-1031
Molex 22-11-1031 is a board connector with 3A signal current rating, 0.098" contact pitch, and 1000VAC dielectric voltage. It features POLYAMIDE insulation, -40 to 105°C operating range, and UL94V-0 flammability. Ideal for commercial applications requiring reliable rectangular PCB connections with solder termination in a straight receptacle style.
22-11-1061
22-11-2132
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
2211S-03G
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): 2.54; MIL Conformity: NO; DIN Conformance: NO;
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; MIL Conformity: NO; JESD-609 Code: e4;
22-11-2046
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved