Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 194280001 is a Combination Line Connector with GLASS FILLED PBT insulator, 12 contacts, and UL 94V-0 flammability rating. It is used for board and panel mounting applications requiring male solder contacts.
Median Price
$5.939
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
VNN
Continental Prestige Electronics
$5.830
$5.713
Netroflash
$5.820
AZTECH Wire
$8.237
Corphita
Argo Parts USA
This material is known for its high strength, rigidity, and temperature resistance, making it suitable for challenging environments.
The combination line connector offers versatility as it can handle multiple types of connections in one unit, reducing the need for multiple connectors.
Having a 94V-0 flammability rating means this product meets stringent fire safety standards, providing peace of mind in potentially hazardous situations.
With 12 contacts, this connector allows for multiple connections to be made simultaneously, increasing efficiency in complex wiring setups.
The ability to mount on both boards and panels gives flexibility in installation options, accommodating various configurations.
Solder termination ensures a secure and reliable connection, essential in high-performance applications where signal integrity is crucial.
Male contacts are commonly used to provide a stable and secure connection, fitting securely into female sockets for dependable performance.
Combination Line Connectors 194280001 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
194280001 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Sangdest Microelectronics (Nanjing)
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Kingwell Technonlogy
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
Good-ark Electronics
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS303C
Idec
ROTARY SWITCH;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
Panjit International
General Semiconductor
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AT06-6S-SR01BLK
Amphenol
Amphenol's AT06-6S-SR01BLK is a 2-row combination line connector with 6 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications due to its compact body size of 1.028" x 0.815" x 1.724".
5055650201
Molex
Molex 5055650201 is a Combination Line Connector with Polyester insulator. Operating temp: -40 to 105°C. Features crimp termination, UL standard, ideal for cable mounting applications.
ATM06-2S-EC01
Amphenol's ATM06-2S-EC01 is a female plug combination line connector with 2 contacts, rated for 7.5A signal current. Made of polyethylene, it operates b/w -55°C to 125°C and is suitable for cable mounting applications.
33471-0201
Molex 33471-0201 is a Combination Line Connector with 0.604" body length and 0.505" width. Made of GLASS FILLED POLYAMIDE, it has 2 contacts for FEMALE crimp termination. Ideal for cable mounting applications due to its RECEPTACLE design and UL 94-HB flammability rating.
12162280
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: .838 inch; No. of Rows Loaded: 1; Filter Feature: NO;
DTM04-08PA
TE Connectivity
TE Connectivity's DTM04-08PA is a 2-row, 8-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, male receptacle with strain relief.
AT06-2S-EC01
The Amphenol AT06-2S-EC01 is a female combination line connector with 2 contacts, rated for 13A signal current. Its compact dimensions of 0.591" x 0.72" x 1.232" make it suitable for cable mounting applications. With an operating temperature range of -55°C to 125°C, it utilizes polyethylene insulator material for reliable performance.
1-770166-0
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; MIL Conformity: NO; Empty Shell: NO;
DT06-2S-CE06
TE Connectivity's DT06-2S-CE06 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, 13A signal current rating, and is ideal for cable mounting applications.
AT04-6P-BM04
Amphenol's AT04-6P-BM04 is a 3-row combination line connector with polyethylene insulator. It operates b/w -55°C to 125°C, rated for 13A signal current. Ideal for cable mounting, it features 6 contacts in receptacle body with male gender pins, terminated via crimping.
DT04-12PA-CE07
TE Connectivity's DT04-12PA-CE07 is a Combination Line Connector with 12 contacts, rated for 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with UL certification and strain relief mounting option.
154719
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; UL Flammability Code: 94V-2; Insulator Material: POLYAMIDE; MIL Conformity: NO; IEC Conformity: NO;
1-1418883-1
TE Connectivity 1-1418883-1 is a Combination Line Connector with dimensions 4.744"x1.811"x1.732". Rated for 36V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and UL Flammability Code 94-HB. With 62 contacts, it's ideal for applications requiring a polarized, female connector with hybrid contact style and strain relief mounting option.
1318917-1
TE Connectivity's 1318917-1 is a Combination Line Connector with dimensions of 0.827" x 1.126" x 0.622". It has 24 contacts, rated for 12V and operating temperatures from -30 to 105°C. Used in applications requiring a polarized, UL-standard connector with female contacts for crimp termination on cables.
DT06-4S-EP06
TE Connectivity's DT06-4S-EP06 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, UL-rated connector with 4 contacts and 13A signal current capacity.
DT06-12SD-B016
TE Connectivity's DT06-12SD-B016 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, crimped female plug with strain relief, this UL-rated connector supports up to 13A signal current across its 12 contacts.
DTM06-12SA-EE04
TE Connectivity's DTM06-12SA-EE04 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring a polarized, female plug with strain relief option.
282764-1
TE Connectivity's 282764-1 is a Combination Line Connector with dimensions of 1.394" x 0.965" x 1.504". Rated for 24V, it has a max temp of 125°C and min of -30°C. With a rated current of 20A, it features polarized housing and is ideal for cable mounting applications.
AT06-4S-RD01
The Amphenol AT06-4S-RD01 is a combination line connector with 4 contacts, rated for 13A signal current. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. With a body size of 0.862" x 0.717" x 1.244", it's ideal for cable mounting applications requiring female SQ PIN-SKT contacts in a plug shell style.
8-968972-2
TE Connectivity 8-968972-2 is a Combination Line Connector with dimensions of 1.024" x 1.024" x 0.945". Rated for 28V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 120°C. With 12 contacts, it's used in applications requiring CRIMP termination at 115/230VAC mains connector rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
194270049
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; DIN Conformance: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
194290040
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: YES; Mixed Contacts: NO; UL Flammability Code: 94V-0;
194270105
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; UL Flammability Code: 94V-0; Termination Type: SOLDER;
194290035
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Reference Standard: UL; Mounting Type: PANEL; Total No. of Contacts: 4;
194214-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Manufacturer Series: 194214; Empty Shell: NO;
19428-0007
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD AND PANEL; UL Flammability Code: 94V-0; Empty Shell: NO;
19428-0017
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; UL Flammability Code: 94V-0; Mixed Contacts: NO;
19428-0024
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; UL Flammability Code: 94V-0; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
194280003
The Molex 194280003 is a Combination Line Connector with dimensions of 2.3" x 1.15". It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material, UL Flammability Code of 94V-0, and rated current of 18A. Ideal for board and panel mounting applications requiring an 8-contact male connector with solder termination.
194280004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Termination Type: SOLDER; MIL Conformity: NO;
194280005
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 10; UL Flammability Code: 94V-0; Termination Contact Finish: NOT APPLICABLE;
194280020
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mounting Type: BOARD AND PANEL;
194280022
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; UL Flammability Code: 94V-0; Filter Feature: NO;
194280023
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO;
194280028
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; UL Flammability Code: 94V-0; Mounting Type: BOARD AND PANEL;
194280029
Molex 194280029, a Combination Line Connector with 2 rows and 8 contacts, features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. Rated for 18A signal current, it is ideal for board and panel mounting applications requiring male solder termination.
194280030
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD AND PANEL; No. of Rows Loaded: 2; MIL Conformity: NO;
194280031
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Rated Current - Signal: 18 A; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
194280011
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Contact Material: NOT SPECIFIED; Termination Type: SOLDER;
194280044
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Body Length: 2.05 inch; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved