Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 18623 is a Barrier Strip Terminal Block with 2 rows and 23 ways, rated for 20A current and 300V voltage. It uses screw fastening method, supports wire gauge up to 12 AWG, and has CSA/UL safety approvals. Ideal for board mounting applications in various industries.
Median Price
$39.950
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
VNN
Andel Nordic
$2.919
$2.802
AZTECH Wire
$7.716
Aztec Data Supply Inc.
$13.137
Continental Prestige Electronics
$39.151
Netroflash
$37.953
$37.154
Corphita
Argo Parts USA
Having 2 rows allows for more connection options and flexibility in wiring configurations.
Board mounting makes installation easier and more secure, providing a stable connection.
CSA and UL safety approvals ensure that this product meets industry safety standards for peace of mind.
Supports larger wire gauge size, allowing for higher current-carrying capacity and reducing resistance.
Rated for up to 300 volts, making it suitable for various electrical applications without risk of damage.
Barrier strip terminal block design allows for easy and secure wire connections, preventing accidental disconnections.
Screw fastening method ensures a tight and secure connection, reducing the risk of loosening over time.
With a rated current of 20 A, this product can handle moderate to high power applications without overheating.
Having 23 ways provides ample connection points for multiple wires or components, increasing versatility and functionality.
Terminals & Terminal Blocks 18623 attributes and parameters. Explore more Terminals & Terminal Blocks devices from Molex
Product Type:
Additional Features:
Safety Compliance:
Rated Voltage:
Rated Current:
Wire Gauge:
Total Ways:
Total Decks:
Total Rows:
Mounting Style:
Fastening Style:
18623 Terminals & Terminal Blocks trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
NSN
1005-00-902-2008, 1005009022008, 2910-13-001-8180, 2910130018180, 5305-01-098-3665, 5305010983665, 5330-01-069-4937, 5330010694937, 5330-01-412-0214, 5330014120214, 5340-00-685-5700, 5340006855700, 5930-00-484-7560, 5930004847560, 6240-01-480-1931, 6240014801931, 7520-21-911-2072, 7520219112072, 5935-00-856-3956, 5935008563956, 8455-99-975-1576, 8455999751576
NIIN
009022008, 130018180, 010983665, 010694937, 014120214, 006855700, 004847560, 014801931, 219112072, 008563956, 999751576
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Synsemi
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
1787072
Phoenix Contact
Phoenix Contact 1787072 is a 2-row strip terminal block with 8 ways and rated voltage of 160V. It has CB, CUL, UL, VDE safety approvals and fastens via connector. Ideal for board and panel mounting, it handles up to 8A current making it suitable for various industrial applications.
3-140
Cinch Connectivity Solutions
BARRIER STRIP TERMINAL BLOCK; Fastening Method: SCREW; Additional Features: PHENOLIC, 94V-1; Wire Gauge: 16 AWG; Voltage (Rated): 250 V; No. of Decks: 1;
395311002
Molex
Molex 395311002 is a STRIP TERMINAL BLOCK with 2 ways, rated for 300V/15A. It uses CONNECTOR fastening method and has CSA/CUL/UL safety approvals. Ideal for BOARD mounting applications in various electrical systems.
MKDSN2,5/2-5,08
The Phoenix Contact MKDSN2,5/2-5,08 is a barrier strip terminal block with 2 ways and rated for 16A current at 400V voltage. It accepts wire gauge up to 14 AWG with a cross section of 2.5mm², fastened by screws on board mounting. Ideal for applications requiring secure electrical connections in industrial settings.
64319-1211
FORK TERMINAL; Manufacturer Series: 64319;
8-31894-1
TE Connectivity
TE Connectivity 8-31894-1 is a UL-approved FEMALE RING TERMINAL for 22 AWG wire, rated at 300V. With a wire cross section of 1.42 mm2, it's ideal for various applications in Terminals & Terminal Blocks category.
38770-0112
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Ways: 24; No. of Rows: 2;
MS25036-102
Defense Logistics Agency
RING TERMINAL; Additional Features: MATERIAL: COPPER; INSULATION: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 1.42 mm2;
31880
RING TERMINAL; Wire Gauge: 22 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1; Wire Cross Section: 1.42 mm2;
MS25036-153
Panduit
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.08 mm2; Safety Approval: UL;
3013
Ntt
LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;
1404
Advanced Interconnections
PCB TERMINAL; Terminal Gender: MALE;
12015870
Aptiv
PUSH-ON TERMINAL; Wire Cross Section: 2 mm2; Terminal Gender: FEMALE;
323975
BUTT TERMINAL; Wire Gauge: 20 AWG; Terminal Gender: FEMALE; Safety Approval: UL; Wire Cross Section: .6 mm2;
1803277
Phoenix Contact 1803277 is a BOARD-mounted BARRIER STRIP TERMINAL BLOCK with 160V rated voltage and 8A rated current. It has CB, CSA, CUL, GOST, UL, VDE safety approvals. Ideal for applications requiring secure electrical connections in limited space.
1729128
The Phoenix Contact 1729128 is a BARRIER STRIP TERMINAL BLOCK with 2 ways, rated for 13.5A current and 400V voltage. It has safety approvals from CB, CCA, CSA, CUL, EAC, GL and uses SCREW fastening method. Ideal for BOARD mounting applications with wire gauge up to 16 AWG and wire cross section of 1.5 mm2.
1827716
Phoenix Contact 1827716 is a UL-approved modular terminal block for PANEL mounting. It supports wire gauge up to 16 AWG with rated voltage of 160V and current of 8A. Ideal for applications requiring secure connections in industrial control systems.
2060-452/998-404
Wago
Wago 2060-452/998-404 is a UL-approved barrier strip terminal block with 2 ways, rated for 9A current and 250V voltage. It supports wire gauge up to 18 AWG (0.75 mm2) and mounts on board using push-on fastening method. Ideal for electrical connections in various applications.
4164
MODULAR TERMINAL BLOCK; Fastening Method: SCREW; Wire Gauge: 0 AWG; Voltage (Rated): 600 V; No. of Ways: 8; Current (Rated): 255 A;
MS25036-105
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 1.5 mm2;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1862852
MODULAR TERMINAL BLOCK; Fastening Method: SCREW; Additional Features: POLYAMIDE, UL 94V-0; Wire Gauge: 16 AWG; Voltage (Rated): 160 V; Current (Rated): 8 A;
1862860000
Weidmueller & Kg
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: CONNECTOR; Additional Features: STANDARD: UL94V-0, GF LCP; Voltage (Rated): 300 V; No. of Rows: 1;
18623
Beau Interconnect
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PANEL MOUNT, PHENOLIC, 94V-0; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;
1862920000
STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: CONNECTOR; Additional Features: STANDARD: UL 94V-0, GLASS FILLED LIQUID CRYSTAL POLYMER; Voltage (Rated): 300 V; No. of Rows: 1;
1862042
Phoenix Contact 1862042 is a BOARD mount BARRIER STRIP TERMINAL BLOCK with 16A current rating and 160V voltage. It supports wire gauge up to 16 AWG and wire cross section of 1.5 mm2, making it ideal for industrial control applications requiring secure electrical connections.
18625
Molex 18625 is a 2-row barrier strip terminal block with 25 ways, rated for 20A current and 300V voltage. It uses screw fastening method and supports wire gauge up to 12 AWG. Ideal for board mounting applications, it holds CSA and UL safety approvals.
1862534
The Phoenix Contact 1862534 is a BARRIER STRIP TERMINAL BLOCK with 14 ways, rated for 16A current and 320V voltage. It supports wire gauge up to 16 AWG and wire cross section of 1.5 mm2, featuring PUSH-IN fastening method. Ideal for BOARD mounting, it holds safety approvals like CB, CUL, EAC, UL, VDE.
18626-58
1862658
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: CONNECTOR; Additional Features: STANDARD: UL 94V-0, PA; Voltage (Rated): 160 V; Current (Rated): 8 A;
Molex 18626-58 is a BARRIER STRIP TERMINAL BLOCK with 2 rows, rated for 20A current and 300V voltage. It has 26 ways and accepts wire gauge up to 12 AWG. Ideal for BOARD mounting applications, it holds CSA and UL safety approvals.
1862246
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: PUSH-IN; Additional Features: STANDARD: UL 94V-0, PA; Wire Gauge: 16 AWG; Voltage (Rated): 160 V;
1862894
MODULAR TERMINAL BLOCK; Fastening Method: SCREW; Additional Features: PA, 94V-0; Wire Gauge: 16 AWG; Voltage (Rated): 160 V; No. of Decks: 1;
1862068
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SPRING LOADED; Additional Features: STANDARD: UL 94V-0, PA; Wire Gauge: 16 AWG; Voltage (Rated): 160 V;
1862204
1862398
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: PUSH-IN; Additional Features: STANDARD: UL 94V-0, PA; Wire Gauge: 16 AWG; Voltage (Rated): 320 V;
1862411
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SPRING LOADED; Additional Features: STANDARD: UL 94V-0, PA; Wire Gauge: 16 AWG; Voltage (Rated): 320 V;
1862959
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PA, UL 94V-0; Wire Gauge: 16 AWG; Voltage (Rated): 160 V;
18629-59
18621-C
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PHENOLIC, 94V-0; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved