Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; Material: BRASS; Mounting Style: STRAIGHT; Contact Resistance: 10 mohm; MIL Conformity: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
EMSNET
Vyrian
Andel Nordic
$32.620
$22.832
EMSNET (Excess)
Corphita
Perfect Parts
Assembly Products 18-12-2405 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Approvals (V):
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Resistance:
Contact Style:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
Taiwan Semiconductor
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
W6S
TE Connectivity
The TE Connectivity W6S is an assembly product designed for the DT SERIES, with a max operating temp of 125°C and min of -55°C. It features a max wire size of 0 AWG, made from polybutylene terephthalate for power and signal applications. Ideal for various industries requiring high-quality electrical connections.
90119-0109
Molex
Molex 90119-0109 CONTACT features CRIMP terminal type, suitable for 24-22 AWG wires. Made of PHOSPHOR BRONZE with 0.168" length, it has FEMALE gender and SQUARE PIN-SOCKET style. Ideal for applications requiring 0.04-0.058" cable entry, such as assembly products needing a STRAIGHT mounting style.
FSD77-8-D
Panduit
Panduit's FSD77-8-D ferrule has CSA approval, DIN conformity, and polypropylene insulator. It supports 18 AWG wire with a 0.12" cable entry. Ideal for electrical assembly applications.
1SNK708911R0000
TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYAMIDE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
MTCB2X-205-XXX
TE Connectivity's MTCB2X-205-XXX is an Assembly Product with a max operating temp of 125°C and min of -65°C. It supports up to 0 AWG wire size, rated for 1.5A current, designed for ROUND WIRE applications with MALE contact gender using POLYARYLENE/POLYETHYLENE material.
2-929939-1
TE Connectivity's 2-929939-1 is a DIN-approved CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 30A current. Ideal for power applications with operating temperatures ranging from -40 to 150°C.
13697414
Aptiv
Aptiv 13697414 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has FEMALE contact gender with 0.0551-0.0748 inch cable entry. Ideal for automotive wiring harness assemblies due to its precise crimping and compatibility with specified cable types.
39-00-0217
Molex 39-00-0217 is a crimp terminal with square pin-socket contact design. It is used in 5557, 30067, 43760, 44516, and 42474 series housings for female contacts. Made of phosphor bronze with a finish thickness of 100 units, it accommodates up to 16 AWG wire sizes in straight mounting style applications.
M23053/16-004-0
TE Connectivity's M23053/16-004-0 is a SINGLE WALL TAPER SLEEVE with CROSSLINKED ELASTOMERIC POLYOLEFIN jacket. It supports wire up to 0 AWG, operating from -75°C to 150°C. Ideal for electrical insulation in various applications.
DF11-22SCA
Hirose Electric
CONNECTOR ACCESSORY;
3047028
Phoenix Contact
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: END COVER; Approvals (V): GOST; MIL Conformity: NO; IEC Conformity: NO;
02-09-2116
Molex 02-09-2116 is a male contact with round pin-socket design, made of brass material. It has a terminal length of 0.24 inch and supports wire sizes from 22 AWG to 18 AWG. Ideal for applications requiring a straight mounting style and crimp terminal type.
0462-005-2031
TE Connectivity's 0462-005-2031 contact features crimp terminal type, machined contact design, and rated current of 7.5A. Ideal for applications requiring female gender contacts with wire gauge ranging from 16 to 18 AWG in straight mounting style.
HD16-9-1939SE-P080
TE Connectivity's HD16-9-1939SE-P080 is a FEMALE connector with 13A rated current and 250V DC voltage. It has a 0.053" to 0.12" cable entry range, operating from -55°C to 125°C. Ideal for POWER AND SIGNAL applications.
HD30-24BT-BK
CONNECTOR ACCESSORY; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -29 Cel; Wire Gauge (AWG): 0; Material: POLYVINYLCHLORIDE; Maximum Wire Size: 0 AWG;
2CTC-R
Adam Tech
The Adam Tech 2CTC-R is a CRIMP terminal with a rated current of 2A and contact resistance of 20 mohm. It supports wire sizes from 28 to 22 AWG, ideal for applications requiring FEMALE contacts in straight mounting style with SQ PIN-SKT design. Operating temperatures range from -25°C to 85°C.
M23053/5-106-9
Alpha Wire
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
282466-1
TE Connectivity's 282466-1 plug housing has a finish thickness of 236.22µm, supports crimp terminals for wire gauge sizes ranging from 15 AWG to 13 AWG. With a rated current of 14A and operating temperatures from -40°C to 125°C, it is ideal for discrete wire applications requiring female contacts in straight mounting style.
50217-9001
The Molex 50217-9001 is a female contact with crimp terminal type for 51067 SERIES HOUSING. It supports wire sizes from 24 AWG to 18 AWG, with 0.055" to 0.118" cable entry. The contact design features a square pin-socket made of brass, suitable for straight mounting applications.
282110-1
TE Connectivity's 282110-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 15 AWG, rated for 14A current, and operates b/w -40 to 125 °C. Ideal for applications requiring female blade pin-skt contacts in assembly products.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved