Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Median Price
$1.385
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.310
100+ parts
$0.948
1k+ parts
$0.787
10k+ parts
$0.746
DigiKey
$1.460
$1.055
$0.941
$0.834
Digiode
$1.045
-
Vyrian
$1.100
Corphita
$0.990
Andel Nordic
$55.850
$39.097
Power Connectors 172767-0112 attributes and parameters. Explore more Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
172767-0112 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
1554216004
Molex
WIRE AND CABLE;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710KL
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
Hy Electronic
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
EU2B-YS3103F
Idec
ROTARY SWITCH;
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
39-28-1063
Molex 39-28-1063 is a rectangular power connector with 6 contacts, TIN COPPER finish, and POLYAMIDE66 insulator. It has a dielectric voltage of 2200VAC, operating temperature range from -40 to 105 °C, and durability of 30 cycles. Ideal for board mounting applications in commercial settings due to its reliability and UL94V-2 flammability rating.
42820-5223
Molex 42820-5223 is a rectangular power connector with 5 contacts, featuring insulation resistance of 1Gohm and dielectric voltage of 2200VAC. Ideal for board mounting applications, it has a durable design with matte tin finish and glass-filled nylon insulator material.
50-84-1030
The Molex 50-84-1030 is a rectangular power connector with 3 contacts, rated at 13.5A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring reliable power connections in temperatures ranging from -55 to 105°C.
IPBT-102-H1-T-S-RA-K
Samtec
The Samtec IPBT-102-H1-T-S-RA-K is a rectangular power connector with liquid crystal polymer insulator. It has 2 contacts, matte tin over nickel finish, and operates b/w -55°C to 105°C. Ideal for board mounting in commercial applications requiring reliable power connections.
1445022-4
TE Connectivity
TE Connectivity's 1445022-4 is a Power Connector with Mating Contact Pitch of 0.118", rated for 250V and operating temperatures from -40 to 105°C. It features a POLYAMIDE66 insulator, suitable for commercial applications in cable mounting setups requiring crimp terminations.
39-29-9043
Molex 39-29-9043 is a rectangular power connector with 0.165" mating contact pitch, suitable for board mounting with 2 rows of contacts. It features TIN COPPER termination finish, POLYAMIDE66 insulator material, and BRASS contact material. Rated at 8A signal current, it has a durability of 30 cycles and operates b/w -40 to 105°C.
432320004
Molex 432320004 is a rectangular power connector with 5 contacts, featuring a mating contact pitch of 0.165" and insulation resistance of 1G ohm. Ideal for board and panel mounting applications, it has a body length of 0.874", operates b/w -40 to 105°C, and uses solder termination.
350767-1
TE Connectivity 350767-1 is a Power Connector with Mating Contact Pitch of 0.25", Insulation Resistance of 100M ohm, and Rated Current of 19A. It is used in applications requiring a durable, polarized housing for power transmission at temperatures ranging from -55 to 105°C.
172328-1
TE Connectivity's 172328-1 Power Connector features a body size of 0.465" x 0.22" x 0.933", rated voltage of 600V, and operating temperature range from -20°C to 105°C. This connector is commonly used in applications requiring a male contact gender, crimp termination type, and panel mounting for power connections.
10153466-08LF
Amphenol Communications Solutions
The Amphenol 10153466-08LF is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40°C to 105°C, ideal for cable mounting applications requiring crimp termination. The connector's compact dimensions of 0.764" x 0.484" x 0.78" make it suitable for various power transmission needs.
6643220-1
TE Connectivity's 6643220-1 is a rectangular power connector with stamped contact design. It has a rated current of 35A, operates b/w -40 to 105°C, and features compliant boardlock mounting. Ideal for commercial applications requiring reliable female connectors with press fit termination in a right angle receptacle design.
03-09-2092
The Molex 03-09-2092 is a rectangular power connector with a mating contact pitch of 0.198 inches. It has a body length of 0.77 inch and width of 0.73 inch, making it suitable for cable mounting applications. With a max operating temperature of 105°C and UL flammability code of 94V-2, it offers reliable performance in commercial settings.
643424-1
TE Connectivity's 643424-1 Power Connector features POLYAMIDE insulator, rated at 12A with 6 contacts. Suitable for board mounting with a temperature range of -40 to 105°C. Ideal for commercial applications requiring durable and reliable power connections.
43045-0420
The Molex 43045-0420 is a rectangular power connector with insulation resistance of 1Gohm, dielectric voltage of 1000VAC, and operating temperature range from -40 to 105°C. It is used in board mounting applications for commercial reliability, featuring a male contact gender and matte tin finish for durability.
350720-1
TE Connectivity's 350720-1 Power Connector features 0.25" Mating Contact Pitch, POLYAMIDE Insulator Material, and -55 to 105°C Operating Temperature range. Ideal for cable mounting applications, this connector has a total of 9 contacts and is UL certified for reliability in commercial settings.
43020-1201
The Molex 43020-1201 is a rectangular power connector with 12 contacts, PBT-POLYESTER insulator, and UL94V-0 flammability rating. It is used for cable mounting applications in commercial settings, featuring a male contact gender and straight plug body style.
105405-1312
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1-480698-0
TE Connectivity 1-480698-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 0.58" x 0.55" x 1.08" dimensions, operates b/w -55 to 105 °C, and offers 1000000000 ohm insulation resistance. Ideal for commercial applications requiring durable, crimped cable termination at 115/230VAC mains connector rating.
172336-1
TE Connectivity 172336-1 is a Power Connector with 0.165" Mating Contact Pitch, rated for 600V and -20 to 105°C operating temperature range. It features POLYAMIDE66 insulator, FEMALE contact gender, and CRIMP termination type. Ideal for commercial applications requiring durable connectors with 2 contacts and wire sizes from 26 to 16 AWG.
39-29-0043
The Molex 39-29-0043 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 2200VAC dielectric voltage. It is used in board mounting applications for commercial reliability, featuring a 0.42" x 0.38" x 0.5" body size and operating temperature range of -40 to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved