Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY;
Median Price
$0.112
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.068
100+ parts
-
1k+ parts
10k+ parts
$0.057
Heilind Electronics
$0.080
$0.065
Farnell
$0.141
$0.085
$0.072
Arrow
$0.147
$0.105
$0.084
$0.082
DigiKey
$0.160
$0.114
$0.097
$0.091
Mouser Electronics
$0.111
$0.089
$0.081
Newark
$0.168
$0.127
$0.108
Element14
$0.274
$0.166
$0.152
Chip1Stop
Master Electronics
$0.071
$0.066
TTI
$0.069
$0.060
Powell Electronics
$0.067
Verical
Digiode
$0.047
Nova Conductors
$0.074
TestEquity
Vyrian
VNN
IBS Electronics
TME
Corphita
$0.044
Bastille Electronics
$0.070
Continental Prestige Electronics
$0.175
Andel Nordic
$2.609
$2.505
Perfect Parts
Kepictronics
RC Electronics
$0.090
Assembly Products 1722644005 attributes and parameters. Explore more Assembly Products devices from Molex
Connector Accessory Type:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Weitronic Enterprise
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M23053/5-103-9
Insultab
ASSEMBLY ITEMS; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL;
0462-203-04141
TE Connectivity's 0462-203-04141 is a female crimp contact with machined design for power applications. It has a rated current of 100A, suitable for wire gauge up to 6 AWG. With operating temperatures ranging from -55°C to 125°C, it is ideal for straight mounting in assembly products.
AW3P
Amphenol
MUSB-2A111-024-BP
The Amphenol MUSB-2A111-024-BP is a dust cover made of silicone rubber with mounting options for #4-40 screws. It has a wide operating temperature range from -40°C to 105°C, making it suitable for various assembly applications. This product is ideal for protecting connectors in harsh environments.
M23053/16-004-0
Dunbar Products
ASSEMBLY ITEMS; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; Construction: SINGLE WALL; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; DIN Conformity: NO;
2-2154857-1
TE Connectivity's 2-2154857-1 is a POWER assembly product with a rated voltage of 250V and max operating temperature of 105°C. It can handle wire sizes up to 0 AWG and has a rated current of 4A. This versatile copper alloy component is commonly used in applications requiring high power transmission.
1062-16-0622
TE Connectivity's 1062-16-0622 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 13A current, and operates b/w -55 to 125 °C. Ideal for applications requiring female contact gender, straight mounting style, and round pin-socket contact design.
50802-8100
Molex
The Molex 50802-8100 is a crimp terminal contact with square pin-socket style, suitable for 51191 housing. It supports wire sizes from 28 to 22 AWG and features a 0.154" terminal length. Ideal for applications requiring female contacts with straight mounting style and brass material construction.
66504-9
TE Connectivity 66504-9 is a CRIMP terminal with operating temperatures from -55 to 105 °C. It supports wire sizes ranging from 24 to 20 AWG and rated for 2A current. Ideal for SIGNAL applications requiring FEMALE contacts with 0.6 mm2 cross-section area.
HDR-E26LPHP+
Honda Tsushin Kogyo
CONNECTOR ACCESSORY; Mounting Option-1: M2; MIL Conformity: NO; IEC Conformity: NO; Material: PBT RESIN; DIN Conformity: NO;
SSHL-003T-P0.2
J S T Mfg
SSHL-003T-P0.2 by J S T Mfg is a CRIMP terminal with POLYBUTYLENE TEREPHTHALATE insulator, suitable for wire and discrete cable types. It has a contact resistance of 40 mohm, rated current of 1 A, and operates b/w -25 to 85 °C. Ideal for signal applications requiring FEMALE contacts with SQUARE PIN-SOCKET design.
1053002100
64
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 64;
39-00-0429
Molex 39-00-0429 is a power contact with square pin-socket style, suitable for 5557, 30067, 44516 or 42474 housing. Features crimp terminal type, 0.051" min cable entry and 0.122" max cable entry. Ideal for applications requiring female contacts in straight mounting style with brass material.
1053002200
Molex 1053002200 is a NANO-FITTM receptacle housing with 15 finish thickness. It features crimp terminal type, rated for 300V AC and 6.5A current. Ideal for power applications, it accommodates wire sizes from 20-22 AWG with female contact gender and compression style.
3505-29B
3m Electronic Products Division
CONNECTOR ACCESSORY; Manufacturer Series: 3505;
1658670-1
TE Connectivity's 1658670-1, a male signal contact assembly product for AMPLIMITE, features crimp terminals suitable for wire gauges from 28 to 22 AWG. With a finish thickness of 30 and operating temperatures ranging from -55°C to 105°C, it can handle currents up to 1.9A efficiently.
39-00-0381
1727040095
Molex 1727040095 BACKSHELL is an Assembly Product for FCT D-SUB usage. Made of ZINC ALLOY, it has a min cable entry of 0.118" and max temp of 100°C. Mounting options include SCREW (4-40 UNC).
216-208
Wago
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 10 AWG; MIL Conformity: NO; Assembly Item Name: FERRULE; IEC Conformity: NO; Additional Features: STANDARD: DIN 46228;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1722537023
Molex 1722537023 is a power connector with 600V AC/DC voltage rating, suitable for 18-16 AWG wires. Features crimp terminals, stamped contact design, and female gender. Ideal for applications requiring a straight mounting style and 0.08-0.094 inch cable entry, such as power assemblies.
1722537123
172253-3011
CONNECTOR ACCESSORY; Material: COPPER ALLOY; Maximum Wire Size: 16 AWG; Mounting Style: STRAIGHT; Contact Style: SQUARE PIN-SOCKET; Finish Thickness: 15;
1722536011
172253-3111
The Molex 172253-3111 is a crimp terminal contact designed for power applications. It has a rated AC voltage of 400V and can handle a max current of 12A. With a min wire size of 22 AWG and max cable entry of 0.059 inch, it is suitable for various assembly products requiring reliable electrical connections.
1722643002
172253-3023
1722644002
1722644004
CONNECTOR ACCESSORY; DIN Conformity: NO; Usage: 172256, 172258; Material: POLYAMIDE; Assembly Item Name: RETAINER ITEM; MIL Conformity: NO;
1722536111
172253-6112
172264-1007
1722641003
1722642008
1722641004
1722641005
1722644007
1722644008
1722644003
1722644006
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved