Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 1720641006 is a rectangular power connector with 6 contacts, rated at 23A signal current. It features matte tin over nickel termination finish and polyethylene insulator material. Ideal for board mounting applications, it has a temperature range of -40 to 120°C and UL flammability rating of 94V-0.
Median Price
$7.090
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DigiKey
1+ parts
$11.970
100+ parts
$8.647
1k+ parts
$7.436
10k+ parts
-
Mouser Electronics
$8.650
$7.430
PEI Genesis
Chip1Stop
$6.380
Verical
Farnell
$7.040
$6.790
Powell Electronics
$6.080
TestEquity
$5.430
Nova Conductors
$6.630
Digiode
$6.792
Vyrian
VNN
IBS Electronics
$6.713
$5.750
TME
Andel Nordic
$2.753
$2.643
AZTECH Wire
$5.530
$5.310
$5.200
$5.100
Corphita
$6.435
Continental Prestige Electronics
$6.497
Netroflash
$6.299
$6.166
Argo Parts USA
Assy Fe
Futuretech Components
EMSNET (Excess)
The compact body length of 0.699 inch allows for easy integration into various devices or equipment without taking up too much space.
The slim body width of 0.572 inch enables a sleek and efficient design for the power connector.
The matte tin over nickel finish on the termination contacts provides excellent conductivity and corrosion resistance for reliable power transmission.
The sufficient body depth of 0.864 inch allows for secure and stable installation of the power connector.
The use of polyethylene as the insulator material ensures excellent insulation properties, enhancing the safety and durability of the connector.
With a high maximum operating temperature of 120 °C, this power connector can withstand demanding environments and prolonged usage without overheating.
The low minimum operating temperature of -40 °C allows the power connector to function effectively in extreme cold conditions.
The rectangular design of the power connector ensures easy alignment and connection, making it user-friendly and versatile for various applications.
The UL 94V-0 flammability rating indicates that this power connector meets stringent safety standards for fire resistance, providing peace of mind during operation.
With a high rated current of 23 A, this power connector can handle heavy load requirements, making it suitable for power-hungry devices or systems.
Compliance with UL standards ensures the quality and reliability of the power connector, meeting industry requirements for safe and efficient operation.
Having 6 contacts allows for multiple connections or configurations, increasing the versatility and compatibility of the power connector.
The board mounting type simplifies the installation process, providing a secure and stable attachment of the power connector to the circuit board.
The solder termination type ensures a reliable and strong connection between the power connector and the circuit board, reducing the risk of disconnection or failure.
The male contact gender allows for easy mating with female connectors, providing a secure and stable electrical connection.
The square pin socket contact style offers a reliable and efficient electrical connection, ensuring optimal signal transmission and performance.
Power Connectors 1720641006 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
JESD-609 Code:
Mating Info.:
Mixed Contacts:
Mounting Type:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Reference Standard:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1720641006 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Cancel Supplier Source 28/Jul/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
AB26TRB-32.768KHZ--T
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
Crimson Semiconductor
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
39-01-3103
Molex
Molex 39-01-3103 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for commercial applications requiring durable crimp termination on cables or panels. With UL94V-2 flammability rating and polarization key for secure mating, it offers reliable performance in various electronic systems.
2204581-1
TE Connectivity
TE Connectivity's 2204581-1 is a rectangular power connector with rated voltage of 400V and UL flammability code of 94V-0. It has insulator material made of glass filled liquid crystal polymer, operating temperature range from -40 to 105°C, and plating thickness of 118.11u. Ideal for board mounting applications, this male connector with press fit termination supports a signal current rating of 35A.
771-9975/116-702
Wago
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
15-24-6181
The Molex 15-24-6181 is a rectangular power connector with 18 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards compliant with CSA and UL.
39-30-1121
Molex 39-30-1121 is a rectangular power connector with 12 contacts, gold-plated termination, and polyamide66 insulator. It has a mating contact pitch of 0.165", withstands up to 1500VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durability, reliability, and signal current rating of 6A.
39-01-3023
Molex 39-01-3023 is a rectangular power connector with 2 rows, insulation resistance of 1Gohm, and operating temp range from -40 to 105°C. Ideal for cable and panel mounting applications due to its durability of 30 cycles, crimp termination type, and male contact gender.
39-29-9049
The Molex 39-29-9049 is a rectangular power connector with 4 contacts, featuring a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. It has a body size of 0.38" x 0.38" x 0.5", suitable for board mounting applications. With a temperature range from -40 to 105°C, it offers reliable performance in commercial settings.
43045-0218
Molex 43045-0218 is a rectangular power connector with insulation resistance of 1Gohm, dielectric voltage of 1000VAC, and operating temp range from -40 to +105°C. Ideal for board mounting applications in commercial settings due to its durable design and bright tin finish contacts.
39-30-1022
Molex 39-30-1022 is a rectangular power connector with 2 rows, rated at 9A signal current. Featuring matte tin finish and polyamide66 insulator material, it offers high insulation resistance of 1Gohm. Ideal for board mounting applications with a temperature range of -40 to +105 °C.
2-917809-2
TE Connectivity's 2-917809-2 is a rectangular power connector with GLASS FILLED POLYESTER insulator, 1.85"x1.051"x1.85" dimensions, and 4 contacts. Operating from -55 to 105°C, it has UL94V-0 flammability rating and crimp termination for commercial applications in cable mounting setups.
03-06-2031
Molex 03-06-2031 is a rectangular power connector with 0.145" mating contact pitch, suitable for commercial applications. Featuring 2100VAC dielectric voltage, it has a rated current of 5A and operates b/w -40 to 105°C. Ideal for panel mounting, this male connector offers reliable performance with a polarization key and crimp termination.
1648212-1
TE Connectivity's 1648212-1 is a RECTANGULAR POWER CONNECTOR with dimensions of 4.39" x 0.79" x 0.905". Made of POLYBUTYLENE TEREPHTHALATE, it operates b/w -40°C to 105°C. Ideal for commercial applications, this FEMALE connector has a Mains Connector Rating of 115/230VAC and meets UL standards.
43045-0424
The Molex 43045-0424 is a rectangular power connector with 4 contacts, featuring insulation resistance of 1 Gohm and operating temperatures from -40 to 105°C. It has a body width of 0.29" and depth of 0.39", suitable for board mounting applications with solder termination.
IPT1-110-01-L-D-RA
Samtec
Samtec's IPT1-110-01-L-D-RA is a rectangular power connector with 20 contacts. It features Tin (Sn) finish with Nickel (Ni) barrier, Liquid Crystal Polymer insulator, and UL 94V-0 flammability rating. Ideal for board mounting applications requiring male contact gender and solder termination.
B03P-VL
J S T Mfg
B03P-VL by J S T Mfg is a RECTANGULAR POWER CONNECTOR with 3 contacts, made of COPPER ALLOY and POLYAMIDE66 insulator. It features Tin (Sn) termination contact finish, suitable for board mounting applications. This connector has a UL Flammability Code of 94V-0 and is designed for male contact gender with solder termination type.
66484-001
AMPHENOL ICC
Amphenol Icc 66484-001 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator, UL 94V-2 flammability rating. Featuring 4 FEMALE contacts for CABLE AND PANEL mounting, it's ideal for power applications requiring reliable wire termination.
46992-0410
Power Connectors; Mating Contact Finish: NOT APPLICABLE; Contact Material: NOT APPLICABLE;
7461057
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 7461057 is a rectangular power connector with 6 contacts. It has a press fit termination and features tin copper contact finish. This connector is commonly used in board mounting applications.
1053081204
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
43045-1414
The Molex 43045-1414 is a rectangular power connector with 14 contacts, featuring a mating contact pitch of 0.118" and insulation resistance of 1G ohm. With a body length of 0.97", it is suitable for board mounting applications in temperatures ranging from -40 to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1720430802
RECTANGULAR POWER CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN; Mating Contact Finish: NOT SPECIFIED; Contact Material: COPPER ALLOY;
1720650006
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
1720640004
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: MATTE TIN OVER NICKEL; MIL Conformity: NO; JESD-609 Code: e3;
1720650004
1720650002
Molex 1720650002 is a rectangular power connector with liquid crystal polymer insulator. It offers 2200VAC dielectric voltage, -40 to 105°C operating temp range, and matte tin over nickel finish. Ideal for commercial applications requiring durable male contacts in board mounting configurations.
1720650008
RECTANGULAR POWER CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE; Contact Style: SQ PIN-SKT;
1720420201
RECTANGULAR POWER CONNECTOR; Contact Material: COPPER ALLOY; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN;
1720430202
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Total No. of Contacts: 2; IEC Conformity: NO;
1720420202
The Molex 1720420202 is a RECTANGULAR POWER CONNECTOR with MATTE TIN finish. Featuring 2 contacts, it is ideal for BOARD mounting and SOLDER termination. This connector is commonly used in applications requiring high UL Flammability Code standards (94V-0).
172064-0006
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Insulator Material: POLYETHYLENE; Total No. of Contacts: 6;
1720640010
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mounting Type: BOARD; Body Width: .572 inch;
1720650310
1720640002
Molex 1720640002 is a rectangular power connector with matte tin over nickel finish. It features 2 copper alloy contacts, UL 94V-0 flammability rating, and male gender. Ideal for board mounting applications requiring reliable solder termination.
1720640008
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
1720640012
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3;
1720641004
Molex 1720641004 is a rectangular power connector with 4 contacts, male gender, and square pin socket style. It has dimensions of 0.474" x 0.572" x 0.864" and operates b/w -40°C to 120°C. Suitable for board mounting, it features solder termination and UL flammability rating of 94V-0.
1720420601
POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: .527 inch; Body Depth: .581 inch; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved