Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 1720430202 is a rectangular power connector with matte tin over nickel finish. Made of glass-filled liquid crystal polymer, it has 2 contacts and UL 94V-0 flammability rating. Ideal for board mounting applications requiring male contact gender with solder termination.
Median Price
$2.390
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Avnet
1+ parts
$1.529
100+ parts
-
1k+ parts
10k+ parts
$1.220
Verical
$1.560
$1.470
$1.440
Farnell
$2.340
$1.330
$1.160
Chip1Stop
$2.440
Mouser Electronics
$2.480
$1.900
$1.690
$1.410
Arrow
$2.583
$1.879
$1.626
$1.427
DigiKey
$2.620
$1.894
$1.685
$1.432
Newark
$2.840
$2.160
$1.960
Master Electronics
$1.390
Powell Electronics
$1.360
Digiode
$1.596
Nova Conductors
$1.832
NAC Semi
$2.370
$2.190
VNN
IBS Electronics
$1.753
$1.655
$1.388
ComSIT Distribution GmbH
Vyrian
Rebound Electronics
PC Components Company LLC
Bristol Electronics
Semicontronic
$1.131
$1.125
Corphita
$1.512
Continental Prestige Electronics
$1.795
Argo Parts USA
Aztec Data Supply Inc.
$7.909
Andel Nordic
$9.287
$8.916
Abacus Technologies
GreenTree Electronics
Eastek
Perfect Parts
This finish provides excellent conductivity and corrosion resistance, ensuring a reliable connection over time.
This material offers high mechanical strength and heat resistance, making the connector durable and suitable for various environments.
The rectangular shape allows for easy and secure connections, reducing the chances of accidental disconnection.
This code indicates that the connector has excellent flame-retardant properties, ensuring safety in case of electrical faults.
With two contacts, this connector is ideal for applications requiring a simple power connection between two components.
The board mounting type makes installation quick and easy, saving time during assembly and maintenance.
Solder termination provides a secure and permanent connection, eliminating the risk of loosening or breaking over time.
The male gender allows this connector to easily mate with female connectors, ensuring compatibility with a wide range of devices.
Power Connectors 1720430202 attributes and parameters. Explore more Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1720430202 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Cancel Alternative Supplier 01/Jun/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
Diotec Semiconductor Ag
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Microsemi
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Silicon Transistor
1723164312
The Molex 1723164312 Power Connector features Liquid Crystal Polymer insulator, 12 contacts, and male SQ pin-skt style. With dimensions of 0.956" x 0.533" x 0.732", it is ideal for board mounting applications. Operating b/w -40°C to 105°C, it meets UL standards for flammability (94V-0).
2-1103004-3
TE Connectivity
TE Connectivity's 2-1103004-3 is a rectangular power connector with 15 contacts, made of POLYETHYLENE. It features UL 94V-0 flammability rating and crimp termination. Ideal for cable mounting applications in various industries.
87427-1202
The Molex 87427-1202 is a rectangular power connector with 12 contacts, offering high insulation resistance of 1Gohm and dielectric voltage withstand of 1500VAC. With a temperature range from -40 to 105°C, it is ideal for board mounting applications requiring durable connections in commercial settings.
6331G2
Anderson Power Products
6331G2 by Anderson Power Products is a RECTANGULAR POWER CONNECTOR with 2 contacts, UL 94V-0 rated. It features HERMAPHRODITIC contact gender and supports CRIMP AND SOLDER termination. Ideal for cable mounting applications in power systems.
1722581104
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
105307-1203
Power Connectors;
10-84-5041
Molex 10-84-5041 is a rectangular power connector with 4 contacts, 6.35mm terminal pitch, and 138u plating thickness. It has an insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting in commercial applications requiring high durability and reliability.
IPL1-102-01-S-S-K
Samtec
Samtec IPL1-102-01-S-S-K is a rectangular power connector with 2 contacts, rated at 5A signal current. It features a mating contact pitch of 0.1", dielectric voltage of 675VAC, and operates b/w -55°C to 125°C. Ideal for board mounting applications in commercial settings, it uses phosphor bronze contacts with gold finish over nickel for reliability.
34566-0803
Molex 34566-0803 is a RECTANGULAR POWER CONNECTOR with 80 contacts, ideal for BOARD mounting. Made of GLASS FILLED SYNDIOTACTIC POLYSTYRENE, it features FEMALE contacts and SOLDER termination. Commonly used in power applications requiring high contact density.
39-03-6030
Molex 39-03-6030 is a rectangular power connector with 3 contacts, POLYAMIDE insulator, and 2100VAC dielectric voltage. It has a temperature range of -40 to 105 °C and is suitable for commercial applications requiring durable crimp termination on cables.
1-1123309-2
TE Connectivity 1-1123309-2 is a rectangular power connector with 4 contacts, rated at 45A. Featuring a body length of 1.156", it has an insulation resistance of 1Gohm and operates b/w -55 to 105°C. Ideal for board mounting applications with solder termination, this connector offers durability of 25 cycles and UL certification.
34729-0200
15-24-6140
The Molex 15-24-6140 is a rectangular power connector with 14 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durable connectors with polarization key and locking options.
2-1445057-2
TE Connectivity's 2-1445057-2 is a RECTANGULAR POWER CONNECTOR with 0.118" Mating Contact Pitch, rated for 250V and 5A signal current. Ideal for board mounting applications, it features POLYAMIDE insulation, -40 to 105°C operating temperature range, and UL94V-0 flammability rating.
1-1123722-8
TE Connectivity 1-1123722-8 is a RECTANGULAR POWER CONNECTOR with 8A rated current, POLYAMIDE66 insulator material, and 1500VAC dielectric voltage. Ideal for BOARD mounting applications in commercial settings due to its durability, high insulation resistance of 1Gohm, and operating temperature range from -25 to 105°C.
VLP-04VN-1
J S T Mfg
VLP-04VN-1 by J S T Mfg is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator material. Featuring 4 contacts, it has a UL Flammability Code of 94V-0 and FEMALE contact gender. Ideal for CABLE mounting with CRIMP termination, this PLUG connector is suitable for power applications.
1-480708-0
TE Connectivity 1-480708-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 12 contacts, operates b/w -55 to 105 °C, and offers high durability with 50 cycles. Ideal for commercial applications requiring reliable power connections in cable-mounted setups.
76825-0012
Molex 76825-0012 Power Connector features 12 contacts, Matte Tin finish over Nickel barrier, and Liquid Crystal Polymer insulator. Ideal for board mounting applications requiring male SQ PIN-SKT contact style with UL 94V-0 flammability rating.
172310-1102
Molex 172310-1102 is a RECTANGULAR POWER CONNECTOR with LIQUID CRYSTAL POLYMER insulator. Featuring 2 contacts, it's UL 94V-0 rated for board mounting with solder termination. Ideal for power applications requiring reliable male connectors.
43640-1100
The Molex 43640-1100 is a rectangular power connector with 11 contacts, rated at 5A signal current. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for cable and panel mounting applications, this connector offers durability of up to 30 cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1720430802
RECTANGULAR POWER CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN; Mating Contact Finish: NOT SPECIFIED; Contact Material: COPPER ALLOY;
1720650006
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
1720640004
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: MATTE TIN OVER NICKEL; MIL Conformity: NO; JESD-609 Code: e3;
1720650004
1720650002
Molex 1720650002 is a rectangular power connector with liquid crystal polymer insulator. It offers 2200VAC dielectric voltage, -40 to 105°C operating temp range, and matte tin over nickel finish. Ideal for commercial applications requiring durable male contacts in board mounting configurations.
1720650008
RECTANGULAR POWER CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE; Contact Style: SQ PIN-SKT;
1720420201
RECTANGULAR POWER CONNECTOR; Contact Material: COPPER ALLOY; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN;
1720641006
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: SQ PIN-SKT; Body Depth: .864 inch; Additional Features: POLARIZED, SHROUDED;
1720420202
The Molex 1720420202 is a RECTANGULAR POWER CONNECTOR with MATTE TIN finish. Featuring 2 contacts, it is ideal for BOARD mounting and SOLDER termination. This connector is commonly used in applications requiring high UL Flammability Code standards (94V-0).
172064-0006
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Insulator Material: POLYETHYLENE; Total No. of Contacts: 6;
1720640010
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mounting Type: BOARD; Body Width: .572 inch;
1720650310
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1720640002
Molex 1720640002 is a rectangular power connector with matte tin over nickel finish. It features 2 copper alloy contacts, UL 94V-0 flammability rating, and male gender. Ideal for board mounting applications requiring reliable solder termination.
1720640008
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
1720640012
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3;
1720641004
Molex 1720641004 is a rectangular power connector with 4 contacts, male gender, and square pin socket style. It has dimensions of 0.474" x 0.572" x 0.864" and operates b/w -40°C to 120°C. Suitable for board mounting, it features solder termination and UL flammability rating of 94V-0.
1720651002
1720420302
Molex 1720420302 is a RECTANGULAR POWER CONNECTOR with 3 contacts, MATTE TIN OVER NICKEL finish. UL 94V-0 rated for high flammability resistance. Ideal for board mounting applications requiring reliable MALE solder connections.
1720430401
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved