Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Termination Contact Finish: Tin (Sn); Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; JESD-609 Code: e3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Andel Nordic
$42.000
$29.398
Corphita
Headers & Edge Type Connectors 171020-3020 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
JESD-609 Code:
171020-3020 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
1N4148WT
Diodes Incorporated
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
B2B-XH-A-E(LF)(SN)
J S T Mfg
B2B-XH-A-E(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for commercial applications, this connector has a rated current of 3A and operates b/w -25 to 85 °C temperatures.
22-27-2051
Molex
The Molex 22-27-2051 is a board connector with 5 contacts, featuring a mating pitch of 0.1", insulation resistance of 1Gohm, and rated current of 4A. It is used in applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
TSW-103-07-G-S-LL
Samtec
The Samtec TSW-103-07-G-S-LL is a 3-contact board connector with gold-plated phosphor bronze contacts. It has a mating contact pitch of 0.1" and termination via soldering, making it ideal for commercial applications requiring reliable connections on PCBs with a terminal pitch of 2.54mm.
B2B-PH-SM4-TB(LF)(SN)
B2B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, POLYAMIDE6T insulator, and -25 to 85°C operating range. It has 2 contacts for surface mount applications on PCBs.
53047-0610
The Molex 53047-0610 is a 6-contact, polarized housing board connector with a mating contact pitch of 0.049 inches. It has a body length of 0.364 inch and is made of polyamide. This connector is commonly used in commercial applications and can withstand temperatures ranging from -40 to 85°C.
53398-1071
53398-1071 by Molex is a board connector with 10 contacts, 0.049" pitch, and 100000000 ohm insulation resistance. It is used in applications requiring a mating contact pitch of 1.25mm, surface mount termination, and a max operating temperature of 85°C.
B4P-VH-FB-B(LF)(SN)
B4P-VH-FB-B(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.156" mating contact pitch, 0.698" body length, and 0.382" body width. It features tin (Sn) termination contact finish and glass-filled polybutylene terephthalate insulator material. Ideal for applications requiring a male straight mounting style connector with solder termination type.
103956-9
TE Connectivity
TE Connectivity 103956-9 is a board connector with 10 contacts, 0.1" pitch, and 3A signal rating. It features tin/lead finish, polyethylene insulation, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable female connectors with polarization key in black color.
B4B-PH-SM4-TB(LF)(SN)
B4B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.079" pitch, 800VAC Dielectric Withstanding Voltage, and -25 to 85 °C operating temperature range. Ideal for PCB applications requiring high insulation resistance, TIN COPPER termination finish, and male SQ PIN-SKT contact style.
22-03-5045
The Molex 22-03-5045 is a board connector with 4 contacts, featuring a mating contact pitch of 0.098", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
53047-1010
Molex 53047-1010 is a board connector with 10 contacts, 0.049" pitch, and 0.561" body length. Ideal for commercial applications, it features polarized housing, solder termination, and UL94V-0 flammability rating.
XHP-2-R
XHP-2-R by J S T Mfg is a BOARD CONNECTOR with 2 contacts, UL 94V-0 rated. It features FEMALE contacts for CRIMP termination and is ideal for CABLE mounting applications.
61302821121
Wuerth Elektronik & Kg
Wurth Elektronik 61302821121 is a 28-contact board connector with gold over nickel finish. It has a pitch of 0.1 inch, rated for 3A signal current, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable male connectors on PCBs with rectangular contact patterns at a spacing of 2.54mm.
693071010811
PCB CONNECTOR; Termination Contact Finish: GOLD; JESD-609 Code: e4; Mating Contact Finish: GOLD; Contact Material: COPPER ALLOY;
SM06B-SRSS-TB(LF)(SN)
SM06B-SRSS-TB(LF)(SN) by J S T Mfg is a 6-contact board connector with 0.039" pitch, suitable for PCB mounting. Featuring tin/copper finish, it has an insulation resistance of 100M ohm and operates b/w -25 to 85°C. Ideal for applications requiring a male contact style in a right-angle mounting configuration.
M80-8262042
Harwin Plc
M80-8262042 by Harwin PLC is a 20-contact male plug board connector with 0.079" mating contact pitch and POLYAMIDE insulator material. It has a rated current of 3A, operates b/w -55 to 125°C, and offers high durability with 500 cycles. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
15-91-1142
Molex 15-91-1142 is a 14-contact board connector with 0.1" pitch, suitable for commercial applications. Features include GLASS FILLED LIQUID CRYSTAL POLYMER insulator, 105°C max operating temp, and 15u plating thickness. Ideal for PCB mounting with solder holding posts, this male connector has a rectangular contact pattern and UL94V-0 flammability rating.
FTSH-105-01-L-DV-K-P
Samtec's FTSH-105-01-L-DV-K-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features TIN over NICKEL termination finish and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable connections on PCBs with a rectangular contact pattern.
78800-0001
Molex 78800-0001 is a card edge connector with 0.1" pitch, liquid crystal polymer insulator, and matte tin over nickel finish. It has 6 contacts, rated for 0.5A signal current, and operates b/w -30 to 85°C. Ideal for board mounting applications requiring high insulation resistance and reliable signal transmission.
TSW-104-07-G-S
Samtec TSW-104-07-G-S is a 4-contact board connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body length of 0.4" and width of 0.098". Ideal for commercial applications, this male connector operates b/w -55°C to 125°C, meeting UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved