Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 85;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$2.777
$2.666
Corphita
Headers & Edge Type Connectors 1705253618 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Dielectric Withstanding Voltage (V):
Durability:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
Minimum Withdrawal Force (N):
1705253618 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Toshiba
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
RN41N-I/RM
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
53398-0371
Molex
Molex 53398-0371 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications requiring a male blade pin-skt contact style in a straight receptacle body with surface mount termination.
2201778-1
TE Connectivity
TE Connectivity 2201778-1 is a PCB connector with 0.04" mating contact pitch, 0.549" body length, and 100000000 ohm insulation resistance. It is used in applications requiring a female compression contact style, right angle mounting, and surface mount termination for commercial reliability.
SFW8S-2STE1LF
Amphenol Communications Solutions
The Amphenol Communications Solutions SFW8S-2STE1LF is an FFC/FPC connector with 0.039" mating contact pitch and 8 contacts. It features tin termination finish, UL 94V-0 flammability code, and surface mount termination. Ideal for board mounting applications requiring a straight female contact gender configuration.
2-2013289-1
TE Connectivity 2-2013289-1 is a card edge connector with 204 contacts, gold finish, and polyethylene insulator. It has a mating contact pitch of 0.024", operates b/w -55 to 85°C, and rated for 0.5A signal current. Ideal for board mounting applications requiring durable connectors with right-angle mounting style.
045138008100858+
Kyocera
PCB CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED;
15910100
W+p Products
15910100 by W+p Products is a BOARD CONNECTOR with 10 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications requiring a right angle mounting style and solder termination.
DM3AT-SF-PEJM5(11)
Hirose Electric
DM3AT-SF-PEJM5(11) by Hirose Electric is a PCB connector with 0.043" mating contact pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for commercial applications, it features a liquid crystal polymer insulator, copper alloy contacts with gold finish, and can withstand temperatures from -25 to 85 °C.
22-29-2041
The Molex 22-29-2041 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a dielectric voltage of 1500VAC and insulation resistance of 5000000000 ohm. With a rated current of 2.5A, this connector has a red insulator color and uses matte tin over nickel termination finish.
FTSH-105-01-F-DV-K-P-TR
Samtec
Samtec's FTSH-105-01-F-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
M80-5401042
Harwin Plc
M80-5401042 by Harwin PLC is a 10-contact board connector with 0.079" mating contact pitch, suitable for PCB mounting with a temperature range of -55 to 125°C. Featuring tin finish contacts and glass-filled polyphenylene sulfide insulator, it offers high durability with 500 cycles and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable right-angle mounting in black color housing.
43645-0600
The Molex 43645-0600 is a board connector with 6 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for commercial applications requiring durable connections, this header connector has a polyester insulator and UL94V-0 flammability rating.
SFW12S-2STE1LF
The Amphenol SFW12S-2STE1LF is a 12-contact FFC/FPC connector with 0.039" pitch, tin finish, and UL94V-0 flammability rating. It is designed for surface mount board applications, featuring female contacts in a straight mounting style. Ideal for compact electronic devices requiring reliable signal transmission.
10124017-1022325LF
Amphenol's 10124017-1022325LF is a 25-contact male plug connector with gold flash finish. Featuring liquid crystal polymer insulator, it has 0.039" mating pitch and 707VAC dielectric voltage rating. Ideal for board stacking applications with UL flammability rating of 94V-0.
851-47-053-10-002000
Mill-max Mfg
BOARD CONNECTOR; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: GOLD;
2110110-1
The TE Connectivity 2110110-1 is a board connector with 180 contacts, featuring a mating contact pitch of 0.075" and insulator made of glass-filled liquid crystal polymer. It has a body length of 1.197", width of 0.909", and depth of 1.272". Ideal for applications requiring high reliability in commercial settings, such as PCB connections with rectangular patterns at temperatures ranging from -55°C to 85°C.
826634-3
TE Connectivity 826634-3 is a 2-row board connector with 0.1" contact pitch, suitable for commercial applications. With insulation resistance of 5G ohm and operating temperature range from -65 to 105°C, it features POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for PCB mounting with right-angle plug style, rated at 5A signal current.
XHP-3
J S T Mfg
XHP-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.098" pitch, suitable for CABLE mounting. Featuring POLYAMIDE6 insulator and UL94V-0 flammability rating, it operates b/w -25 to 85°C. With 1000VAC dielectric voltage and 3A signal current, it's ideal for applications requiring FEMALE SQ PIN-SKT contacts.
B02B-XASK-1(LF)(SN)
B02B-XASK-1(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, COPPER ALLOY material, and TIN finish. It has a terminal pitch of 2.5mm and UL Flammability Code of 94V-0. Ideal for applications requiring reliable male connectors on circuit boards.
50-57-9010
The Molex 50-57-9010 is a board connector with 10 contacts, 0.1" pitch, and 0.099" body width. It features glass-filled polyester insulator material and is UL94V-0 rated. Ideal for commercial applications requiring a reliable female SQ pin-skt contact style with crimp termination on cable mounting.
02R-JWPF-VSLE-S
BOARD CONNECTOR; DIN Conformance: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved