Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Median Price
$0.197
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.189
100+ parts
-
1k+ parts
$0.166
10k+ parts
$0.154
Heilind Electronics
$0.192
$0.162
$0.152
Arrow
$0.238
$0.163
$0.138
$0.121
Newark
$0.249
$0.186
Mouser Electronics
$0.360
$0.258
$0.209
$0.190
DigiKey
$0.230
$0.199
Verical
Powell Electronics
$0.165
$0.157
Chip1Stop
$0.011
Digiode
$0.002
Vyrian
TME
$0.245
$0.234
IBS Electronics
$0.206
$0.201
Corphita
Assy Fe
Aztec Data Supply Inc.
Headers & Edge Type Connectors 1510492401 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
1510492401 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
Crimson Semiconductor
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
Semicoa
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
Microsemi
1N4148WS
Multicomp Pro
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
50-57-9002
Molex
The Molex 50-57-9002 is a board connector with a mating contact pitch of 0.1". Featuring glass-filled polyester insulator, it operates b/w -40 to 105°C. With female SQ pin-skt contacts, it is ideal for commercial applications requiring a reliable rectangular contact pattern.
DT06-08SA-P012
Deutsch
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Mounting Type: CABLE;
71922-220LF
Amphenol Communications Solutions
Amphenol's 71922-220LF header connector features a 0.1" pitch, 2 rows with 20 contacts, and matte tin over nickel finish. Ideal for board connections in commercial applications, it offers high insulation resistance of 105M ohm and operates b/w -65°C to 125°C temperature range.
DF40C-100DS-0.4V
Hirose Electric
DF40C-100DS-0.4V by Hirose Electric is a 2-row stacking connector with 100 contacts, gold termination, and liquid crystal polymer insulator. It has a mating contact pitch of 0.016", dielectric voltage of 100VAC, and operates b/w -35 to 85°C. Ideal for board applications requiring durability, reliability, and signal current rating of 0.3A.
2-640456-4
TE Connectivity
TE Connectivity 2-640456-4 is a 24-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish, it has a rated current of 5A and operates b/w -55 to 105°C. Ideal for PCBs, this male plug connector offers reliable performance with UL94V-0 flammability rating.
SSW-108-01-S-D
Samtec
SSW-108-01-S-D by Samtec is a 2-row, 16-contact board connector with a mating contact pitch of 0.1 inch. It features a liquid crystal polymer insulator and matte tin termination contact finish. This socket-style connector is commonly used in commercial applications requiring reliable connections on printed circuit boards.
3000
3m Electronic Products Division
The 3m Electronic Products Division's mfgpartno 3000 is a BOARD CONNECTOR with UL Flammability Code 94V-0. It features Terminal Pitch of 2.54mm and SOLDER Termination Type, suitable for applications requiring RIGHT ANGLE or STRAIGHT Mounting Style.
M80-8262042
Harwin Plc
M80-8262042 by Harwin PLC is a 20-contact male plug board connector with 0.079" mating contact pitch and POLYAMIDE insulator material. It has a rated current of 3A, operates b/w -55 to 125°C, and offers high durability with 500 cycles. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
851-43-025-10-001000
Mill-max Mfg
The Mill-max Mfg 851-43-025-10-001000 is a board connector with a total of 25 contacts and a terminal pitch of 1.27mm. It features a matte tin over nickel contact finish and is commonly used in applications requiring female socket connectors on circuit boards.
66506-320LF
Amphenol Communications Solutions' 66506-320LF is a 2-row loaded board connector with 16 contacts. It has a terminal pitch of 2.54mm and is UL Flammability Code 94V-0 rated. This male connector is used for straight mounting on boards, making it suitable for various applications in the electronics industry.
52271-1679
The Molex 52271-1679 is a FFC/FPC connector with 16 contacts, rated at 0.5A signal current. It has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 750VAC. Ideal for board mounting applications, it features a polyamide insulator material and operates b/w -40 to 85°C temperature range.
ESHF-105-01-L-D-SM
The Samtec ESHF-105-01-L-D-SM is a 2-row board connector with a contact pitch of 0.05". It features matte tin termination, gold mating finish, and liquid crystal polymer insulator. Ideal for commercial applications requiring reliable surface mount connections in temperatures ranging from -55 to 125°C.
2-640456-2
The TE Connectivity 2-640456-2 is a board connector with a mating contact pitch of 0.1", suitable for commercial applications. Featuring a max operating temperature of 105°C, it has 22 contacts and a rated current of 5A. With solder termination and UL94V-0 flammability rating, it offers reliable performance in various electronic systems.
746-068-520-601
Edac
Edac 746-068-520-601 is a 68-contact card edge connector with 0.125" pitch, suitable for PCB mounting. It features a dielectric voltage of 1500VAC, insulation resistance of 5Gohm, and operating temperatures from -40 to 105°C. Ideal for applications requiring high current signal transmission in black insulator color with UL94V-0 flammability rating.
43025-2400
The Molex 43025-2400 is a 24-contact board connector with 0.118" pitch, suitable for commercial applications. Featuring polyester insulation and UL94V-0 flammability rating, it operates b/w -40°C to 105°C. With a rated current of 2.5A, this female connector has a crimp termination type and requires min withdrawal force of 3.5584N.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
67910-5700
The Molex 67910-5700 is a card edge connector with 52 contacts, featuring gold over nickel termination finish. With a mating contact pitch of 0.031", it offers high insulation resistance of 500M ohm and withstands up to 300VAC dielectric voltage. Ideal for board mounting applications in commercial settings, this connector has a durability of 50 cycles and operates b/w -40°C to 80°C temperatures.
PHDR-10VS
PHDR-10VS by J S T Mfg is a 2-row BOARD CONNECTOR with 10 contacts, rated at 3A signal current. Featuring POLYAMIDE66 insulation material, it offers an insulation resistance of 1Gohm and withstands up to 800VAC. Ideal for applications requiring a mating contact pitch of 0.079 inches, such as cable mounting with crimp termination in electronics assemblies.
DF13-20DS-1.25C
DF13-20DS-1.25C by Hirose Electric is a 20-contact board connector with 0.049" pitch, suitable for commercial applications. Featuring POLYAMIDE insulation, it has a 500VAC dielectric voltage rating and operates b/w -35 to 85°C. With FEMALE contacts and CRIMP termination, it offers durability of 30 cycles in a LOCKING cable mounting setup.
M20-9990345
The Harwin PLC M20-9990345 is a board connector with 3A signal current rating, gold-plated contacts, and 0.1" pitch. Ideal for commercial applications, it offers high durability with 300 cycles and operates b/w -40°C to 105°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved