Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 15-91-1202 is a board connector with 20 contacts, featuring a mating contact pitch of 0.1", matte tin over nickel finish, and glass-filled liquid crystal polymer insulator. It operates b/w -40 to 105°C, rated for 2.5A signal current, and complies with UL and CSA standards. Ideal for commercial applications requiring reliable male connectors in straight mounting style.
Median Price
$2.800
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$2.240
1k+ parts
$1.930
10k+ parts
$1.390
Nova Conductors
$1.900
-
Digiode
$2.660
Vyrian
VNN
Ampacity Inc.
$2.380
Corphita
$2.520
Andel Nordic
$6.624
$6.359
AZTECH Wire
$14.912
Netroflash
$1.862
$1.805
$1.767
0.1 - Close contact pitch allows for efficient signal transfer and compatibility with various PCB layouts.
0.99 inch - Longer body length provides stability and secure connection between connectors.
0.2 inch - Compact width makes it suitable for space-constrained applications without compromising on performance.
MATTE TIN OVER NICKEL - Durable finish ensures reliable conductivity and resistance to corrosion.
0.09 inch - Slim body depth allows for easy installation in tight spaces on the PCB.
GLASS FILLED LIQUID CRYSTAL POLYMER - High-quality insulator material offers excellent heat resistance and robust mechanical properties.
2 - Double row loading increases the number of contacts and enhances connectivity options.
SOLDER HOLDING POSTS - Secure mounting option ensures stability and longevity of the connector on the PCB.
105 - Wide temperature range makes it suitable for use in various environments without compromising performance.
40 °C - Low operating temperature ensures reliability even in extreme cold conditions.
15u - Thick plating ensures durability and long-term performance in demanding applications.
2 - Increased number of PCB rows provides more connection options for complex circuit designs.
BOARD CONNECTOR - Specifically designed for easy and secure connections on PCBs, ensuring a reliable electrical interface.
94V-0 - High flammability rating ensures safety and compliance with industry standards.
2.5 A - High current rating allows for efficient power transmission and compatibility with various devices.
BLACK - Neutral color blends well with most PCB designs and provides a sleek appearance.
UL, CSA - Compliance with these standards ensures quality, safety, and reliability of the product.
20 - High number of contacts provides ample connection options for complex circuitry and signal transmission.
ONE - Single connector simplifies installation and reduces the risk of errors during assembly.
0.1 - Close row spacing allows for compact layout designs and efficient use of space on the PCB.
BOARD - Easy board mounting option facilitates quick and secure installation on PCBs.
2.54 - Standard pitch size ensures compatibility with various connectors and devices.
RECTANGULAR - Rectangular contact pattern provides secure and stable connections for effective signal transmission.
SURFACE MOUNT - Surface mount termination allows for easy and secure mounting on the PCB surface.
MALE - Male contacts ensure compatibility with corresponding female connectors and enhance overall connectivity.
15 mohm - Low contact resistance ensures efficient power transmission and minimal signal loss.
RECEPTACLE - Receptacle style enhances the durability and stability of the connector on the PCB.
STRAIGHT - Straight mounting style provides a simple and secure installation process for easy PCB integration.
SQ PIN-SKT - Square pin socket contact style offers a reliable and secure connection for efficient signal transmission.
RECTANGULAR - Rectangular contact pattern ensures stable connections and efficient signal transmission.
COMMERCIAL - Commercial-grade reliability ensures consistent performance and durability for industrial applications.
Headers & Edge Type Connectors 15-91-1202 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
15-91-1202 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Multiple Devices Location 20/Sep/2019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Semitron
Vishay Telefunken
1N4148WS
Meritek Electronics
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
DF11-14DS-2C
Hirose Electric
DF11-14DS-2C by Hirose Electric is a 2-row, 14-contact board connector with a mating contact pitch of 0.079". Featuring TIN termination finish and polyamide insulator, it operates b/w -30°C to 85°C. Ideal for cable mounting applications, it offers a durability of 30 cycles and rated current of 2A for signal transmission.
SHR-10V-S-B
J S T Mfg
SHR-10V-S-B by J S T Mfg is a 10-contact board connector with female contacts. It has a 94V-0 UL flammability code and uses crimp termination. Ideal for cable mounting applications in headers & edge type connectors.
307-074-422-212
Edac
Edac 307-074-422-212 is a CARD EDGE CONNECTOR with 74 contacts, 5A signal current rating, and 2545VAC dielectric voltage. It has a 0.156" pitch for PCB mating and operates b/w -40 to 105°C. Ideal for board and panel mounting applications requiring high insulation resistance.
2023960407
Molex
Molex 2023960407 is a board connector with 0.039" mating contact pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for applications requiring male connectors with right-angle mounting style and surface mount termination.
22-05-2051
Molex 22-05-2051 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring matte tin over nickel termination finish, it offers high durability with 25 cycles and reliable performance in commercial applications. The connector has a total of 5 contacts, solder termination type, and white polyamide insulator material.
MM60-52B1-E1-R650
Japan Aviation Electronics Industry
MM60-52B1-E1-R650 by Japan Aviation Electronics is a 52-contact card edge connector with gold over nickel finish. It has a mating contact pitch of 0.031", operates b/w -40 to 80°C, and offers a dielectric voltage of 424VAC. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
53313-3465
Molex 53313-3465 is a 34-contact board connector with TIN finish. Featuring 2 loaded rows, it has a terminal pitch of 2mm and UL94V-0 flammability rating. Ideal for applications requiring male contacts, solder termination, and straight mounting style.
B2PS-VH
B2PS-VH by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) over Copper (Cu) finish. It has a terminal pitch of 3.96mm and is ideal for right angle mounting on boards. This UL 94V-0 rated connector is commonly used in applications requiring secure male connections.
35572-0400
Molex 35572-0400 is a 4-contact board connector with 0.098" pitch, suitable for commercial applications. With insulation resistance of 1Gohm and operating temp range of -40 to 105°C, it features tin finish contacts and UL94V-0 flammability rating. Ideal for cable mounting, this polarized housing connector offers reliable performance in various electronic systems.
78172-0004
Molex 78172-0004 is a board connector with 0.047" pitch, GOLD finish, and 100000000 ohm insulation resistance. Ideal for commercial applications, it has a temperature range of -25 to 85 °C and can handle up to 1.5A signal current in cable mounting setups.
51103-0400
The Molex 51103-0400 is a board connector with 4 contacts, 0.098" pitch, and POLYBUTYLENE TEREPHTHALATE insulator. It operates b/w -40 to 105 °C, has a dielectric voltage of 1400VAC, and is UL94V-0 rated. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
SHR-03V-S
SHR-03V-S by J S T Mfg is a 3-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
640456-3
TE Connectivity
TE Connectivity 640456-3 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. Featuring TIN termination finish, it has a rated current of 5A and operates b/w -55 to 105°C. Ideal for use in electronics requiring a male contact gender with straight mounting style.
09185106324
Harting Electronics & Kg
09185106324 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Insulation Resistance of 1000000000 ohm, and Body Length of 0.807". It is used in BOARD EURO CONNECTOR applications, featuring POLARIZED HOUSING for polarization key and SOLDER termination type for durability.
22-03-5045
The Molex 22-03-5045 is a board connector with 4 contacts, featuring a mating contact pitch of 0.098", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
22-05-2071
Molex 22-05-2071 is a board connector with 7 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring durable connectors with a mounting style of right angle and solder termination type.
1-640456-2
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Terminal Pitch (mm): 2.54; Mating Contact Finish: NOT SPECIFIED;
09032966825
09032966825 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Insulation Resistance of 1000000000000 ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for board connections in commercial applications due to its durability, UL Flammability Code rating of 94V-0, and rated current signal capacity of 2A.
DF40C-80DP-0.4V(51)
DF40C-80DP-0.4V(51) by Hirose Electric is a 2-row, 80-contact board stacking connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.016", it offers high insulation resistance of 50M ohm and withstands up to 100VAC. Ideal for PCB applications requiring reliable signal transmission in commercial environments at temperatures ranging from -35°C to 85°C.
22-14-2064
The Molex 22-14-2064 board connector features a mating contact pitch of 0.1", insulation resistance of 500000000000 ohm, and dielectric voltage rating of 250VAC. Ideal for PCB edge locking hook mounting, this female plug connector has a total of 6 contacts and is rated for signal currents up to 2.5A in commercial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
15-91-0100
Molex 15-91-0100 is a 2-row, 10-contact board connector with 0.1" pitch. It features matte tin over nickel finish, glass-filled liquid crystal polymer insulator, and brass contacts. Suitable for PCB applications with operating temperatures from -40°C to 120°C, UL94V-0 rated for reliability in commercial settings.
15910100
W+p Products
15910100 by W+p Products is a BOARD CONNECTOR with 10 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications requiring a right angle mounting style and solder termination.
15-91-1122
The Molex 15-91-1122 is a board connector with 12 contacts, rated at 2.5A signal current. Featuring a mating contact pitch of 0.1", it has a body length of 0.59" and operates b/w -40 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs with surface mount termination.
15-91-1142
Molex 15-91-1142 is a 14-contact board connector with 0.1" pitch, suitable for commercial applications. Features include GLASS FILLED LIQUID CRYSTAL POLYMER insulator, 105°C max operating temp, and 15u plating thickness. Ideal for PCB mounting with solder holding posts, this male connector has a rectangular contact pattern and UL94V-0 flammability rating.
15-91-1183
The Molex 15-91-1183 is a board connector with 18 contacts, 2 rows, and a mating contact pitch of 0.1". It features GLASS FILLED LIQUID CRYSTAL POLYMER insulator material, solder holding posts for board mounting, and a max operating temperature of 105°C. Ideal for commercial applications requiring a reliable male receptacle connector with surface mount termination.
15-91-0140
The Molex 15-91-0140 is a board connector with 14 contacts, featuring a mating contact pitch of 0.1", matte tin over nickel termination finish, and glass-filled liquid crystal polymer insulator. It operates in temperatures ranging from -40 to 105°C and has a rated current of 2.5A for signal transmission. Ideal for commercial applications requiring reliable surface mount connectors with rectangular contact patterns.
15-91-0060
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
15-91-2045
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; No. of Connectors: ONE;
15-91-2040
The Molex 15-91-2040 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.19 inch. It has a bright tin termination contact finish and is suitable for commercial applications.
15-91-1102
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0;
15-91-2080
The Molex 15-91-2080 is a board connector with 8 contacts, rated for 2.5A signal current. It features a mating contact pitch of 0.1", termination finish of Bright Tin (Sn) with Nickel (Ni), and an operating temperature range from -40 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs with a rectangular contact pattern.
15-91-2060
The Molex 15-91-2060 is a board connector with mating contact pitch of 0.1", suitable for commercial applications. It features bright tin over nickel termination, brass contacts, and UL94V-0 flammability rating. With a rated current of 2.5A, it operates b/w -40°C to 105°C temperature range on PCBs with rectangular contact pattern.
15-91-0040
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
15-91-1443
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body or Shell Style: RECEPTACLE;
15-91-2085
15-91-1103
15-91-2100
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 2;
15912100
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VDC; No. of Connectors: ONE; Body Length: 1.22 inch;
15-91-6165
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Manufacturer Series: 71308;
15-91-3034
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved