Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 15-91-3034 is a board connector with 0.1" pitch, suitable for applications requiring a durable male receptacle with matte tin finish and 3A signal current rating. With glass-filled polyester insulation, it offers high reliability in commercial environments at temperatures ranging from -40 to 105°C.
Median Price
$2.366
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Newark
1+ parts
$0.712
100+ parts
1k+ parts
10k+ parts
-
Interstate Connecting
$1.892
$1.659
$1.498
Heilind Electronics
$1.974
$1.661
$1.562
Adafruit Industries
$2.173
$2.065
Mouser Electronics
$2.850
$2.170
$2.070
$2.000
Farnell
$3.030
$2.030
$1.800
DigiKey
$3.390
Element14
$4.190
$3.110
$2.920
TTI
Chip1Stop
$2.560
$2.100
Verical
$2.050
$1.970
Digiode
$1.444
Nova Conductors
$1.971
VNN
ComSIT Distribution GmbH
Vyrian
IBS Electronics
$1.975
$1.863
$1.600
Semtec, LLC
Semi Source
Corphita
$1.368
Continental Prestige Electronics
$1.959
$1.920
Argo Parts USA
Netroflash
$1.872
$1.833
Advanced Electronics
Semicontronic
$2.890
$2.818
$2.803
Aztec Data Supply Inc.
$5.423
Andel Nordic
$7.130
$4.993
Glotronic Ltd.
Assy Fe
Perfect Parts
The close contact pitch allows for high density connections and efficient use of space on the PCB.
The compact body length makes this connector suitable for applications where space is limited.
High insulation resistance ensures reliable performance and prevents any leakage current.
The high dielectric withstanding voltage ensures safety and reliability in high voltage applications.
The matte tin over nickel finish provides good conductivity and corrosion resistance for long-lasting performance.
The high temperature rating allows for use in a wide range of operating conditions.
The low temperature rating allows for reliable performance even in extreme cold environments.
The glass-filled polyester material provides strength and durability to the connector.
The thick plating ensures good conductivity and corrosion resistance for a long service life.
The board connector type is suitable for PCB applications, providing a secure and reliable connection.
The UL 94V-0 flammability rating ensures the connector's safety in case of fire.
The high rated current capacity makes this connector suitable for carrying signal currents in various applications.
Headers & Edge Type Connectors 15-91-3034 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
15-91-3034 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Multiple Devices Raw Material Manufacturing 11/Nov/2014
PCN Assembly/Origin - Mult Devs Supplier 02/Dec/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Mde Semiconductor
EU2B-YS3203F
Idec
ROTARY SWITCH;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Multicomp Pro
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
Bourns
SM03B-SRSS-TB(LF)(SN)
J S T Mfg
J S T Mfg SM03B-SRSS-TB(LF)(SN) is a 3-contact board connector with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCB applications requiring male contact, surface mount termination, and right-angle mounting with locking option.
M20-9990446
Harwin Plc
The Harwin PLC M20-9990446 is a board connector with 0.1" mating contact pitch, 3A signal current rating, and -40 to 105°C operating temperature range. It is ideal for commercial applications requiring a durable male receptacle with solder termination and UL flammability rating of 94V-0.
FTSH-110-01-L-DV-K-P-TR
Samtec
Samtec's FTSH-110-01-L-DV-K-P-TR is a 20-contact board connector with a mating contact pitch of 0.05". It features a liquid crystal polymer insulator, matte tin termination finish, and gold mating contacts. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
1-826629-2
TE Connectivity
TE Connectivity 1-826629-2 is a board connector with 12 contacts, 0.1" pitch, and tin finish. It has a body length of 1.2", insulation resistance of 5G ohm, and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable signal connections on PCBs.
5055960801
Molex
BOARD CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
S2B-PH-SM4-TB
S2B-PH-SM4-TB by J S T Mfg is a BOARD CONNECTOR with 2 contacts, COPPER ALLOY material, and TIN finish. It has a terminal pitch of 2mm for SURFACE MOUNT applications in headers & edge type connectors. The connector is UL 94V-0 rated and suitable for RIGHT ANGLE mounting on boards.
70553-0002
Molex 70553-0002 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and operating temperature range of -40 to 105°C. Ideal for right-angle mounting on PCBs with rectangular contact pattern.
B02B-PASK(LF)(SN)
B02B-PASK(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, 800VAC dielectric voltage, and 3A signal current rating. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and is suitable for board mounting applications requiring high insulation resistance and reliable signal transmission.
FTSH-105-01-F-D-K
Samtec's FTSH-105-01-F-D-K is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
341-054-500-101
Edac
Edac 341-054-500-101 is a CARD EDGE CONNECTOR with 54 contacts at 0.1" pitch. It has an insulation resistance of 5Gohm, rated for 3A signal current, and operates b/w -40 to 105°C. Ideal for wire wrap termination in applications requiring high contact reliability and low withdrawal force.
833-87-054-30-001101
Preci-dip Sa
833-87-054-30-001101 by Preci-dip Sa is a 54-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Featuring Beryllium Copper contacts with AU finish, it offers high durability of 500 cycles and insulation resistance of 10 Gohm. Ideal for applications requiring a mating contact pitch of 0.079", such as commercial electronics systems.
87438-0443
The Molex 87438-0443 is a board connector with 4 contacts, featuring a mating contact pitch of 0.059" and insulation resistance of 1G ohm. It has a body length of 0.287", operates b/w -55 to 105°C, and is ideal for commercial applications requiring a durable, polarized housing with matte tin finish.
66506-338LF
AMPHENOL ICC
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
M50-3600542P
M50-3600542P by Harwin Plc is a 10-contact, surface mount board connector with a terminal pitch of 1.27mm. It features tin contact finish with a nickel barrier and is suitable for applications requiring UL flammability code 94V-0 compliance.
31249116
Ria Electronic
BOARD CONNECTOR; Option: GENERAL PURPOSE;
803-87-054-30-001101
803-87-054-30-001101 by Preci-dip Sa is a BOARD CONNECTOR with 54 contacts, featuring BERYLLIUM COPPER contact material and GOLD FLASH mating finish. It has a terminal pitch of 2.54mm and is designed for surface mount applications in headers & edge type connectors.
50-57-9007
The Molex 50-57-9007 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It has 7 female contacts with SQ pin-skt style for cable mounting applications. The UL 94V-0 rated connector is made of glass filled polyester and meets commercial reliability standards.
103960-9
The TE Connectivity 103960-9 is a board connector with a contact pitch of 0.1", insulation resistance of 5Gohm, and dielectric voltage rating of 600VAC. It is used in applications requiring a rated current of 3A, with an operating temperature range from -65 to +105°C, making it suitable for commercial reliability requirements.
746-064-520-601
Edac 746-064-520-601 is a 64-contact card edge connector with 0.125" pitch, suitable for PCBs with 2 rows. It features a dielectric voltage of 1500VAC and insulation resistance of 5Gohm, making it ideal for applications requiring high reliability in temperatures ranging from -40 to 105°C.
53261-1071
Molex 53261-1071 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications requiring male blade pin-skt contacts in right-angle mounting style with surface mount termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
15910100
W+p Products
15910100 by W+p Products is a BOARD CONNECTOR with 10 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications requiring a right angle mounting style and solder termination.
15-91-0100
Molex 15-91-0100 is a 2-row, 10-contact board connector with 0.1" pitch. It features matte tin over nickel finish, glass-filled liquid crystal polymer insulator, and brass contacts. Suitable for PCB applications with operating temperatures from -40°C to 120°C, UL94V-0 rated for reliability in commercial settings.
15-91-1122
The Molex 15-91-1122 is a board connector with 12 contacts, rated at 2.5A signal current. Featuring a mating contact pitch of 0.1", it has a body length of 0.59" and operates b/w -40 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs with surface mount termination.
15-91-1142
Molex 15-91-1142 is a 14-contact board connector with 0.1" pitch, suitable for commercial applications. Features include GLASS FILLED LIQUID CRYSTAL POLYMER insulator, 105°C max operating temp, and 15u plating thickness. Ideal for PCB mounting with solder holding posts, this male connector has a rectangular contact pattern and UL94V-0 flammability rating.
15-91-1183
The Molex 15-91-1183 is a board connector with 18 contacts, 2 rows, and a mating contact pitch of 0.1". It features GLASS FILLED LIQUID CRYSTAL POLYMER insulator material, solder holding posts for board mounting, and a max operating temperature of 105°C. Ideal for commercial applications requiring a reliable male receptacle connector with surface mount termination.
15-91-0140
The Molex 15-91-0140 is a board connector with 14 contacts, featuring a mating contact pitch of 0.1", matte tin over nickel termination finish, and glass-filled liquid crystal polymer insulator. It operates in temperatures ranging from -40 to 105°C and has a rated current of 2.5A for signal transmission. Ideal for commercial applications requiring reliable surface mount connectors with rectangular contact patterns.
15-91-0060
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
15-91-1443
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body or Shell Style: RECEPTACLE;
15-91-2045
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; No. of Connectors: ONE;
15-91-2085
15-91-6165
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Manufacturer Series: 71308;
15-91-1102
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0;
15-91-0040
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
15-91-1103
15-91-2040
The Molex 15-91-2040 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.19 inch. It has a bright tin termination contact finish and is suitable for commercial applications.
15-91-1162
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulator Color: BLACK;
15-91-0160
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO;
15-91-2080
The Molex 15-91-2080 is a board connector with 8 contacts, rated for 2.5A signal current. It features a mating contact pitch of 0.1", termination finish of Bright Tin (Sn) with Nickel (Ni), and an operating temperature range from -40 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs with a rectangular contact pattern.
15-91-3073
The Molex 15-91-3073 is a board connector with 7 contacts, 0.1" pitch, and 600VAC dielectric voltage. Ideal for commercial applications, it features a surface mount termination type and operates b/w -40 to 105°C temperatures.
15-91-3084
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved