Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 15-06-0246 is a rectangular power connector with 24 contacts, rated at 9A signal current. Featuring a mating contact pitch of 0.165", it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications, this durable connector offers crimp termination and polarization key for secure connections.
Median Price
$2.047
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Newark
1+ parts
$0.465
100+ parts
1k+ parts
10k+ parts
-
Verical
$1.920
$1.790
$1.560
Arrow
$1.795
$1.652
Mouser Electronics
$2.180
$1.730
$1.630
Farnell
$2.562
$1.819
$1.576
Element14
$2.601
$2.549
$2.468
$2.357
DigiKey
$3.660
$2.563
$2.124
Master Electronics
$1.940
$1.810
$1.550
Chip1Stop
$1.860
$1.760
TTI
$1.800
$1.710
RS (Exports)
$2.995
$2.874
Digiode
$0.442
DF Sales Co.
$1.500
Nova Conductors
$2.220
VNN
IBS Electronics
$2.160
$2.006
$1.725
TME
$2.030
$1.690
$1.490
Vyrian
Prism Electronics
Semicontronic
$0.395
$0.385
$0.383
Corphita
$0.418
Aztec Data Supply Inc.
$1.669
Argo Parts USA
Modulus Dynamics
$2.464
$2.440
$2.366
Continental Prestige Electronics
$2.470
$1.430
Andel Nordic
$3.130
$3.005
Authorized Procurement Solutions
Perfect Parts
Assy Fe
Bastille Electronics
0.165 - Allows for precise alignment and connection, ensuring reliable performance.
1000000000 ohm - Provides high insulation to prevent electrical leakage and shorts.
0.62 inch - Compact size for space-saving installations without sacrificing functionality.
1500VAC - Can withstand high voltages, enhancing safety during operation.
1.008 inch - Offers a suitable depth for secure connection and stability.
POLYAMIDE66 - Durable material for long-lasting usage and resistance to wear and tear.
2 - Allows for multiple connections for increased power distribution.
105 - Ensures reliable performance in high-temperature environments.
STRIP OR LOOSE - Versatile design for various connection options depending on user preference.
40 °C - Can function effectively in low-temperature conditions without issue.
YES - Provides versatility for custom wiring configurations based on specific needs.
RECTANGULAR POWER CONNECTOR - Ideal for power-related applications requiring a secure and efficient connection.
94V-0 - Meets strict safety standards for flame-retardant materials.
CENTER - Ensures proper alignment during connection, reducing the risk of damage.
9 A - Capable of handling high currents for reliable power delivery.
CSA, UL - Compliant with industry standards for quality and performance.
24 - Provides ample connections for various power needs.
28 AWG - Accommodates a wide range of wire sizes for versatility.
30 Cycles - Can withstand frequent connection and disconnection cycles without wear.
0.165 - Precise spacing for secure connection and alignment.
CABLE AND PANEL - Offers flexibility for installation on different surfaces and setups.
16 AWG - Supports thicker wires for increased current-carrying capacity.
CRIMP - Provides a secure and reliable connection method for wiring.
3.1136 - Resists accidental disconnection for stable performance.
MALE - Compatible with various female connectors for seamless integration.
PLUG - Easy-to-use design for quick and efficient connections.
0.035 inch - Accommodates various wire diameters for versatile usage.
6.672 - Ensures a secure connection without excessive force.
PLASTIC - Lightweight and durable material for easy installation and longevity.
POLARIZED LCK - Secure locking mechanism for stable connections and safety.
RECTANGULAR - Suitable for applications requiring rectangular connections for efficient power transfer.
COMMERCIAL - Designed for commercial applications requiring dependable performance.
Power Connectors 15-06-0246 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Minimum Insulation Diameter:
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
Minimum Withdrawal Force (N):
15-06-0246 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
6651777-1
TE Connectivity's 6651777-1 is a Power Connector with 3A signal current rating and UL94V-0 flammability code. Featuring POLYPHTALAMIDE insulator, it has 6 contacts in one row with 0.098" spacing for board mounting applications at -40 to 105°C temperature range.
794821-1
TE Connectivity's 794821-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator, rated at 600V and operating temperature range of -20 to 105 °C. It has 8 contacts, suitable for cable mounting applications in power systems with UL certification.
39-01-2040
Molex 39-01-2040 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable and panel mounting configurations.
42820-2223
Molex 42820-2223 is a rectangular power connector with 2 contacts, made of glass-filled nylon. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability in commercial settings.
1-480710-0
TE Connectivity 1-480710-0 is a Power Connector with insulation resistance of 100MΩ, operating temp range -55 to 105°C. It has 15 contacts arranged in S0P15 pattern for cable mounting applications.
643424-1
TE Connectivity's 643424-1 Power Connector features POLYAMIDE insulator, rated at 12A with 6 contacts. Suitable for board mounting with a temperature range of -40 to 105°C. Ideal for commercial applications requiring durable and reliable power connections.
43650-0624
The Molex 43650-0624 is a rectangular power connector with 6 contacts made of brass. It features TIN over nickel termination finish and glass-filled liquid crystal polymer insulator material. Ideal for board mounting in applications requiring male contact gender and UL 94V-0 flammability rating.
1381
Anderson Power Products
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; Mounting Type: CABLE; Total No. of Contacts: 1; Empty Shell: YES;
39-28-8020
Molex 39-28-8020 is a rectangular power connector with 2 contacts, made of brass and tin/copper finish. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications due to its durability and reliability meeting CSA, TUV, UL standards.
31067-1010
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
IPBT-105-H2-T-D-K
Samtec
IPBT-105-H2-T-D-K by Samtec is a power connector with liquid crystal polymer insulator, matte tin over nickel contact finish, and copper alloy contacts. It has a temperature range of -55 to 105°C and meets CSA and UL standards. Ideal for commercial applications requiring a reliable surface mount male connector with 10 contacts on a straight board mounting style.
891-8985/205-201
Wago
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
43020-0600
The Molex 43020-0600 is a rectangular power connector with a body depth of 0.665 inch. It has an insulator material made of PBT-POLYESTER and can operate in temperatures ranging from -40 to 105 °C. This connector is commonly used for power connections in commercial applications.
39-28-8060
Molex 39-28-8060 is a rectangular power connector with 6 contacts, made of brass and tin/copper finish. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to +105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.
647845-5
TE Connectivity's 647845-5 is a rectangular power connector with a body size of 1.9" x 1.38" x 0.625". It has a rated voltage of 600V and can operate in temperatures ranging from -20°C to 105°C. This connector is commonly used for cable mounting applications, supporting wire sizes from 12 AWG to 6 AWG.
87427-0202
Molex 87427-0202 is a rectangular power connector with 2 contacts, made of brass and polyamide. It has an insulation resistance of 1Gohm, dielectric voltage of 1500VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with matte tin finish.
1053081208
Molex 1053081208 is a rectangular power connector with 8 female contacts. It has 0.5" x 0.395" x 0.618" dimensions and uses POLYAMIDE insulator material. Ideal for cable mounting, it operates at -40°C, complies with UL 94V-0 flammability code, and meets CSA and UL standards.
1-350777-1
TE Connectivity 1-350777-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 2 contacts, operates b/w -55 to 105°C, and UL94V-0 flammability rating. Ideal for power applications requiring CRIMP termination on CABLE mountings.
1-640508-0
TE Connectivity 1-640508-0 is a RECTANGULAR POWER CONNECTOR with 3 contacts, rated at 250V and 9A. Made of POLYAMIDE66, it has a temperature range of -55 to 85 °C. Ideal for power applications requiring secure crimp termination in a compact panel-mount design.
1-1123824-1
TE Connectivity 1-1123824-1 is a RECTANGULAR POWER CONNECTOR with rated voltage of 250V and current of 8A. It has POLYAMIDE66 insulator, BRASS shell material, and operates b/w -25 to 105 °C. Ideal for board mounting applications requiring reliable power connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
15-06-0065
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Minimum Withdrawal Force (N): 3.1136; Termination Contact Finish: NOT APPLICABLE;
15-06-0100
Molex 15-06-0100 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. It has 10 contacts, operates b/w -40 to 105 °C, and offers high insulation resistance of 1G ohm. Ideal for commercial applications requiring reliable power connections in panels with solder termination.
15-06-0045
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Type: CABLE AND PANEL; IEC Conformity: NO;
15-06-0046
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body or Shell Style: PLUG; Contact Material: NOT SPECIFIED;
15-06-0085
Molex 15-06-0085 is a rectangular power connector with a mating contact pitch of 0.165 inches. It has an insulation resistance of 1G ohm and can withstand temperatures from -40 to 105°C. This connector is commonly used in cable and panel mounting applications for power connections.
15-06-0140
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Withdrawal Force (N): .5004;
15-06-0066
Molex 15-06-0066 is a rectangular power connector with 2 rows, rated at 11A signal current. Featuring a dielectric voltage of 2200VAC, it has a durability of 30 cycles and operates b/w -40 to 105°C. Ideal for commercial applications requiring reliable power connections in harsh environments.
15-06-0141
Molex 15-06-0141 is a RECTANGULAR POWER CONNECTOR with 14 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It has a body size of 2.409" x 0.681" x 0.772", operating from -40 to 105°C. Ideal for commercial applications requiring reliable power connections with solder termination on panels.
15-06-0040
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: STRAIGHT;
15-06-0245
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Type: CRIMP; Body Width: .62 inch;
15-06-0105
Molex 15-06-0105 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for cable and panel mounting in commercial applications requiring durable crimp terminations.
15-06-0060
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Resistance: 10 mohm;
15-06-0101
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulation Resistance: 1000000000 ohm;
15-06-0061
15-06-0080
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Filter Feature: NO;
15-06-0041
15-06-0181
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Color: NATURAL;
15-06-0146
Molex 15-06-0146 is a rectangular power connector with 14 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It has a mating contact pitch of 0.165", operates b/w -40 to 105°C, and supports wire sizes from 28 to 16 AWG. Ideal for cable and panel mounting applications requiring durability over 30 cycles.
15-06-0106
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body Depth: 1.008 inch; Mating Contact Pitch (inch): 0.165;
15-06-0206
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Rows Loaded: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved