Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 10897062 header connector features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage rating of 600VDC. Ideal for board connections in commercial applications, this male connector has a total of 6 contacts with a durability of 50 cycles.
Median Price
$0.300
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Sager
1+ parts
$0.250
100+ parts
-
1k+ parts
$0.190
10k+ parts
Heilind Electronics
$0.260
$0.218
$0.205
RS Americas
$0.270
RS (Exports)
Avnet
$0.285
Interstate Connecting
$0.286
$0.251
$0.227
Verical
$0.280
Mouser Electronics
$0.690
$0.491
$0.358
$0.331
Farnell
$0.695
$0.387
$0.320
Arrow
$0.711
$0.590
$0.518
$0.458
Element14
$0.958
$0.721
$0.626
$0.551
Chip1Stop
$1.010
$0.729
$0.678
DigiKey
$1.340
$0.922
$0.737
$0.613
PEI Genesis
TTI
$0.277
$0.240
$0.221
Master Electronics
$0.401
$0.311
Powell Electronics
$0.295
$0.273
Newark
$0.622
$0.535
$0.465
TestEquity
$0.230
Digiode
$0.238
Rapid Electronics
Nova Conductors
$0.469
Component Electronics Inc.
$1.690
$1.270
$1.100
IBS Electronics
$0.216
$0.200
TME
$0.353
$0.321
Vyrian
VNN
Sensible Micro Corp
Bristol Electronics
PC Components Company LLC
Atlantic Semiconductor
Inventory MP
Prism Electronics
Sea View Technologies
Semi Source
Elcom Components
Corphita
$0.225
Continental Prestige Electronics
$0.355
$0.348
Argo Parts USA
$0.344
Aranea Global
$0.460
$0.441
Aztec Data Supply Inc.
$3.332
Andel Nordic
$10.625
$10.200
GreenTree Electronics
Authorized Procurement Solutions
Perfect Parts
Assy Fe
Futuretech Components
Provides a precise and reliable connection between the headers and edge type connectors.
Compact size allows for space-saving installation on PCBs.
Ensures electrical safety and prevents short circuits.
Can handle high voltage applications without risk of electrical breakdown.
Provides corrosion resistance and ensures a durable connection.
Allows for multiple connections, increasing the versatility of the product.
Offers good conductivity and durability for reliable connections.
Can handle moderate current loads for signal transmission.
Securely mounts onto PCB for stable connections.
Low resistance for efficient signal transmission.
Headers & Edge Type Connectors 10897062 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
10897062 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
Formosa Microsemi
Leshan Radio
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
DF13-4S-1.25C
Hirose Electric
DF13-4S-1.25C by Hirose Electric is a 4-contact board connector with 0.049" pitch, rated for 1A signal current. Featuring polyamide insulation and UL94V-0 flammability, it operates b/w -35°C to 85°C. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
5-146280-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 6; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
B04B-PASK-1(LF)(SN)
J S T Mfg
B04B-PASK-1(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C. Featuring tin finish contacts and UL-rated insulation material, it offers high insulation resistance of 1000000000 ohm and dielectric voltage withstand of 800VAC. Ideal for PCB mounting with solder termination, this male connector has a contact resistance of 20 mohm and can handle up to 3A signal current.
22-55-2201
Molex
The Molex 22-55-2201 is a board connector with 20 contacts, 0.1" pitch, and 0.999" body length. It is used in commercial applications with -40 to 120°C operating temperature range for cable mounting via crimp termination.
B6B-XH-AM(LF)(SN)
B6B-XH-AM(LF)(SN) by J S T Mfg is a 6-contact male board connector with brass contacts and tin termination finish. It has a terminal pitch of 2.5mm, suitable for straight mounting on boards. Ideal for applications requiring reliable connections in headers & edge type connectors.
22-11-2042
Molex 22-11-2042 is a board connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring brass contacts, matte tin finish, and polyamide insulator material, it offers high durability with 50 cycles. With a rated current of 4A and operating temperature range from 0 to 75°C, it meets UL and CSA standards for commercial applications.
B8B-PH-K(LF)(SN)
B8B-PH-K(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, 2A signal current rating, and 800VAC dielectric voltage. Ideal for applications requiring a male SQ PIN-SKT contact style, such as PCB connections in electronics with operating temperatures ranging from -25 to 85 °C.
1658621-1
TE Connectivity
TE Connectivity 1658621-1 is a dual-row board connector with 10 contacts, 0.1" pitch, and polyethylene insulation. It operates b/w -65 to 105°C, rated at 1A signal current, suitable for ribbon cable termination in commercial applications.
B4B-PH-K-S
B4B-PH-K-S by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2mm and is used for board mounting applications requiring male connectors with solder termination.
7-215079-6
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Board Mounting Option: SOLDERABLE RETENTION CLIPS; Insulator Color: RED;
61300511121
Wuerth Elektronik & Kg
61300511121 by Wurth Elektronik is a BOARD CONNECTOR with 5 contacts, rated for 3A signal current. Featuring a mating contact pitch of 0.1", it has gold over nickel termination finish and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs.
S3B-XH-A(LF)(SN)
S3B-XH-A(LF)(SN) by J S T Mfg is a 3-contact board connector with brass contacts and tin copper finish. It has a terminal pitch of 2.5mm, UL 94V-0 flammability rating, and right-angle mounting style. Ideal for applications requiring secure board-to-board connections in electronic devices.
TCMD-12-01
Samtec
Samtec's TCMD-12-01 is a 24-contact, 2-row board connector with terminal pitch of 2mm. It supports IDC/solder termination and male contact gender. Ideal for applications requiring straight mounting on both boards and cables.
M80-8530842
Harwin Plc
The Harwin PLC M80-8530842 is a 8-contact male plug board connector with 0.079" mating contact pitch and 3A signal current rating. Featuring POLYAMIDE insulation, it operates b/w -55°C to 125°C, suitable for commercial applications requiring durability up to 500 cycles.
SHF-105-01-L-D-SM-LC-TR
BOARD CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
71600-010LF
Amphenol Communications Solutions
71600-010LF by Amphenol is a board connector with 10 contacts, 2 rows, and a mating contact pitch of 0.1". It features an insulation resistance of 50G ohm, operates b/w -65 to 105°C, and has a durability of 100 cycles. Ideal for commercial applications requiring reliable signal connections in tight spaces.
1-281742-0
TE Connectivity 1-281742-0 is a POLYETHYLENE insulator BOARD CONNECTOR with 20 contacts, rated at 3A. It has a polarization key and operates b/w -40 to 100 °C. The connector features tin termination finish, UL94V-0 flammability rating, and right angle mounting for various applications.
76384-303LF
Amphenol 76384-303LF is a board connector with 0.1" pitch, suitable for commercial applications. Features include 3A signal current, -40 to 125°C operating range, and UL94V-0 flammability rating. Ideal for PCB mounting with solder termination and polarized housing design.
61300211121
61300211121 by Wuerth Elektronik & Kg is a board connector with a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage of 500VAC. It is used in applications requiring a rated current of 3A, operating temperatures from -40 to 125°C, and UL94V-0 flammability compliance.
TSW-104-07-G-S
Samtec TSW-104-07-G-S is a 4-contact board connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body length of 0.4" and width of 0.098". Ideal for commercial applications, this male connector operates b/w -55°C to 125°C, meeting UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
10-89-7101
The Molex 10-89-7101 header connector features a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and dielectric voltage withstand of 600VDC. Ideal for board connections in commercial applications due to its durable construction and male contact gender with solder termination.
10-89-7102
The Molex 10-89-7102 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 600VDC dielectric voltage, it has a durable design with matte tin over nickel finish. With 10 contacts and male gender, it is ideal for commercial applications requiring reliable signal transmission up to 3A.
10-89-7302
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VDC; No. of Connectors: ONE;
10-89-7802
10-89-7082
The Molex 10-89-7082 is a 8-contact board connector with 0.1" pitch, suitable for commercial applications. It features TIN OVER NICKEL finish, POLYETHYLENE insulation, and can withstand up to 600VDC. Ideal for PCBs with rectangular contact patterns requiring reliable connections at temperatures ranging from -40°C to 105°C.
10-89-7202
The Molex 10-89-7202 header connector features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage withstand of 600VDC. Ideal for board connections in applications requiring a durable, male receptacle with straight mounting and solder termination. Operating temperatures range from -40 to 105°C, meeting UL and CSA standards for commercial reliability.
10-89-7401
10-89-7262
The Molex 10-89-7262 header connector features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage rating of 600VDC. Ideal for board connections in commercial applications, this male connector has a total of 26 contacts with a durability of 50 cycles.
10-89-7801
10-89-7502
10-89-7122
The Molex 10-89-7122 header connector features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage withstand of 600VDC. Ideal for board connections in applications requiring a durable, male contact with solder termination and straight mounting style.
10-89-7100
The Molex 10-89-7100 is a board connector with 2 rows, 10 contacts, and a mating contact pitch of 0.1". It features a matte tin over nickel finish, polyethylene insulator material, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a durable connector with high insulation resistance and UL certification.
10-89-7081
10-89-7142
The Molex 10-89-7142 is a board connector with 14 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage withstand of 600VDC. Ideal for applications requiring durable connectors in commercial settings with operating temperatures ranging from -40 to 105°C.
10-89-7461
10-89-7061
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
10-89-7042
The Molex 10-89-7042 is a 4-contact board connector with gold finish, rated for 3A signal current. Featuring a mating contact pitch of 0.1", it has a durable design for commercial applications. With a dielectric voltage of 600VDC and operating temperature range from -40 to 105°C, it is ideal for various PCB connections.
10-89-7242
10-89-7800
10-89-7040
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved