Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 10-89-7102 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 600VDC dielectric voltage, it has a durable design with matte tin over nickel finish. With 10 contacts and male gender, it is ideal for commercial applications requiring reliable signal transmission up to 3A.
Median Price
$0.559
Lifecycle Status
Suppliers In-Stock
45
In-Stock Inventory
1k+
Sager
1+ parts
$0.419
100+ parts
-
1k+ parts
$0.318
10k+ parts
Heilind Electronics
$0.463
$0.390
$0.366
Master Electronics
$0.500
$0.416
Interstate Connecting
$0.544
$0.456
$0.431
Avnet
RS (Exports)
$0.706
$0.656
$0.576
RS Americas
$1.020
$0.810
$0.720
Mouser Electronics
$1.140
$0.878
$0.729
$0.594
DigiKey
$2.070
$1.459
$1.152
$0.998
Chip1Stop
$0.428
$0.330
TTI
$0.386
$0.327
Farnell
$0.303
Element14
$0.903
$0.783
$0.752
Verical
$0.748
$0.539
$0.525
Beyond Components
Newark
$1.130
Powell Electronics
Freelance Electronics
$0.139
DF Sales Co.
$0.300
Digiode
$0.398
TestEquity
$0.410
Nova Conductors
$0.530
Greenchips
$0.578
$0.550
$0.524
$0.473
TME
$0.980
$0.505
$0.380
Component Electronics Inc.
$1.150
$0.870
$0.750
Jameco Electronics
IBS Electronics
$0.375
$0.314
Vyrian
VNN
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
SIE Connect GmbH - GreenChips
Prism Electronics
Inventory MP
Bristol Electronics
North Shore Components
Elcom Components
Semi Source
LWI Electronics Inc
A2Z Electronics, Inc.
QIE Inc.
EMSNET
NPI Materials, Inc.
Speed Components Ltd
Semicontronic
$0.328
$0.320
Corphita
$0.377
Aranea Global
$0.519
$0.499
Argo Parts USA
$0.514
Continental Prestige Electronics
Aztec Data Supply Inc.
$5.473
Authorized Procurement Solutions
Assy Fe
Kepictronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Futuretech Components
The close spacing of mating contacts allows for a high-density connection on the PCB, making this product suitable for applications requiring multiple connections in a small space.
The compact body length of the connector helps in saving space on the board while providing a reliable and secure connection.
High insulation resistance ensures that the signals are not interfered with by external factors, leading to a stable and reliable connection.
The high dielectric voltage withstand capability makes this connector suitable for applications where high voltage requirements are necessary.
The matte tin over nickel finish provides corrosion resistance and enhances the durability of the connector, ensuring a long-lasting connection.
Having two rows loaded allows for multiple connections in a single connector, increasing the versatility and functionality of the product.
With a high maximum operating temperature, this connector can withstand elevated temperatures, making it suitable for a wide range of operating environments.
The 15u plating thickness provides a reliable and robust connection, ensuring good conductivity and longevity of the connector.
The square pin/socket contact style allows for a secure and stable connection, reducing the risk of signal loss or disruptions.
Headers & Edge Type Connectors 10-89-7102 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
10-89-7102 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
International Devices
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B2PS-VH(LF)(SN)
J S T Mfg
B2PS-VH(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.156" pitch, 10A signal current, and 1500VAC dielectric voltage. It has POLYAMIDE66 insulator for -25 to 85 °C operation. Ideal for PCBs needing right angle mounting with solder termination and male contact gender.
52271-0469
Molex
Molex 52271-0469 FFC/FPC connector with 0.039" pitch, 0.118" body width, and TIN finish is ideal for board mounting applications. Features include polyamide insulator, phosphor bronze contacts, and UL94V-0 flammability rating. Suitable for surface mount termination in commercial settings.
DF3-4S-2C
Hirose Electric
DF3-4S-2C by Hirose Electric is a 4-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. It is used in cable mounting applications for signal currents up to 3A, featuring UL94V-0 flammability rating and POLYAMIDE insulator material.
831-43-030-30-002000
Mill-max Mfg
831-43-030-30-002000 by Mill-max Mfg is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 2mm and is for SURFACE MOUNT applications. This FEMALE SOCKET connector mounts STRAIGHT on the board.
22-05-3021
Molex 22-05-3021 is a board connector with 2 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.2"x0.25"x0.442". It uses matte tin/copper termination finish, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right-angle mounting style with solder termination.
77311-118-02LF
Amphenol Communications Solutions
Amphenol 77311-118-02LF is a board connector with 0.1" pitch, suitable for commercial applications. Features include 3A signal current, 2121VAC voltage withstand, and -65 to 125°C operating range. Ideal for PCB mounting with solder termination and gold mating finish over nickel.
22-16-2060
The Molex 22-16-2060 board connector features a mating contact pitch of 0.1", insulation resistance of 500000000000 ohm, and dielectric voltage rating of 250VAC. Ideal for PCB edge locking hook mounting, this female plug connector has a durability of 25 cycles and is rated for a max operating temperature of 105°C.
50-57-9406
Molex 50-57-9406 is a board connector with 0.1" pitch, suitable for commercial applications. It features a 3A signal current rating, GLASS FILLED POLYESTER insulator, and operates b/w -40 to 105°C. Ideal for cable mounting with crimp termination, this connector has a total of 6 contacts in a polarized housing design.
XF2M-3015-1A-R100
Omron
Omron XF2M-3015-1A-R100 is a FFC/FPC connector with 30 contacts, rated at 0.5A signal current. It features gold (Au) - nickel (Ni) finish, 0.020" pitch, and liquid crystal polymer insulator. Suitable for board mounting applications with durability of 20 cycles and operating temperature range from -30 to 85°C.
560020-0220
The Molex 560020-0220 is a board connector with 2 contacts, 0.079" pitch, and 3A signal current rating. It features a polyamide insulator, TIN contact finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable connectors with surface mount termination.
53261-0371
Molex 53261-0371 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a male blade pin-skt contact style, right-angle mounting, and surface mount termination type.
22-55-2201
The Molex 22-55-2201 is a board connector with 20 contacts, 0.1" pitch, and 0.999" body length. It is used in commercial applications with -40 to 120°C operating temperature range for cable mounting via crimp termination.
14-56-4045
The Molex 14-56-4045 is a board connector with 0.1" mating contact pitch, gold termination finish, and 600VAC dielectric voltage. Ideal for commercial applications, it has a black insulator color, UL flammability rating of 94V-0, and operates b/w -40 to 120°C.
DF3-6S-2C
DF3-6S-2C by Hirose Electric is a 6-contact board connector with 0.079" pitch, suitable for cables with 22-28 AWG wire sizes. With a dielectric voltage of 650VAC and operating temperatures from -30 to 85°C, it's ideal for commercial applications requiring a reliable signal current of up to 3A.
FTSH-110-01-L-DV-K-A-P
Samtec
Samtec's FTSH-110-01-L-DV-K-A-P is a 2-row, 20-contact board connector with a contact pitch of 1.27mm. It features gold mating contacts over nickel, suitable for commercial applications with an operating temperature range from -55 to 125°C. The connector has a straight mounting style and uses liquid crystal polymer insulator material.
DF19G-20P-1H(52)
DF19G-20P-1H(52) by Hirose Electric is a 20-contact FFC/FPC connector with 0.93"x.065"x.224" dimensions, POLYAMIDE insulator, and UL 94V-0 flammability rating. Ideal for board mounting in applications requiring right angle receptacle connectors with square pin sockets.
851-43-025-10-001000
The Mill-max Mfg 851-43-025-10-001000 is a board connector with a total of 25 contacts and a terminal pitch of 1.27mm. It features a matte tin over nickel contact finish and is commonly used in applications requiring female socket connectors on circuit boards.
02011602101
Harting Electronics & Kg
02011602101 by Harting Electronics & Kg is a 160-contact board euro connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring gold over nickel termination finish, it has an insulation resistance of 1T ohm and operates b/w -65 to 125°C. Ideal for commercial applications requiring high durability and reliability.
FFSD-25-01-N
Samtec's FFSD-25-01-N is a 2-row BOARD CONNECTOR with 50 contacts made of BERYLLIUM COPPER. It features IDC termination and FEMALE contact gender, suitable for CABLE mounting applications.
1410189-3
TE Connectivity
TE Connectivity 1410189-3: Headers & Edge Type Connector with 0.07" pitch, LCP insulator, and 1A signal current rating. Ideal for board connections in commercial applications due to its durability, UL certification, and polarization key feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
10-89-7101
The Molex 10-89-7101 header connector features a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and dielectric voltage withstand of 600VDC. Ideal for board connections in commercial applications due to its durable construction and male contact gender with solder termination.
10-89-7302
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VDC; No. of Connectors: ONE;
10-89-7802
10-89-7082
The Molex 10-89-7082 is a 8-contact board connector with 0.1" pitch, suitable for commercial applications. It features TIN OVER NICKEL finish, POLYETHYLENE insulation, and can withstand up to 600VDC. Ideal for PCBs with rectangular contact patterns requiring reliable connections at temperatures ranging from -40°C to 105°C.
10-89-7202
The Molex 10-89-7202 header connector features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage withstand of 600VDC. Ideal for board connections in applications requiring a durable, male receptacle with straight mounting and solder termination. Operating temperatures range from -40 to 105°C, meeting UL and CSA standards for commercial reliability.
10-89-7401
10-89-7262
The Molex 10-89-7262 header connector features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage rating of 600VDC. Ideal for board connections in commercial applications, this male connector has a total of 26 contacts with a durability of 50 cycles.
10-89-7801
10-89-7502
10897062
10-89-7122
The Molex 10-89-7122 header connector features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage withstand of 600VDC. Ideal for board connections in applications requiring a durable, male contact with solder termination and straight mounting style.
10-89-7100
The Molex 10-89-7100 is a board connector with 2 rows, 10 contacts, and a mating contact pitch of 0.1". It features a matte tin over nickel finish, polyethylene insulator material, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a durable connector with high insulation resistance and UL certification.
10-89-7081
10-89-7142
The Molex 10-89-7142 is a board connector with 14 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage withstand of 600VDC. Ideal for applications requiring durable connectors in commercial settings with operating temperatures ranging from -40 to 105°C.
10-89-7461
10-89-7061
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
10-89-7042
The Molex 10-89-7042 is a 4-contact board connector with gold finish, rated for 3A signal current. Featuring a mating contact pitch of 0.1", it has a durable design for commercial applications. With a dielectric voltage of 600VDC and operating temperature range from -40 to 105°C, it is ideal for various PCB connections.
10-89-7242
10-89-7800
10-89-7121
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved