Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$3.408
$3.272
Corphita
Telecom & Datacom Connectors 105156-1007 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
105156-1007 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
IRLML6401TRPBF
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
NE555D
STMicroelectronics
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1-5749111-0
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN OVER NICKEL; UL Flammability Code: 94V-0; Termination Type: IDC;
74441-0001
Molex
Molex 74441-0001 is a telecom/datacom connector with 0.031" mating contact pitch, suitable for board mounting in commercial applications. Features include brass contacts, matte tin finish, and glass-filled polyethylene insulator material. Ideal for right-angle mounting with staggered PCB contact pattern.
555164-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Mating Contact Finish: GOLD (50); No. of Ports: 1;
MRJ-5480-01
Amphenol
Amphenol MRJ-5480-01 is a Telecom & Datacom Connector with gold-plated contacts, polyethylene insulator, and zinc alloy shell. It has 8 contacts, rated at 1.5A signal current, suitable for board mounting with solder termination. Operating temperature range from -40 to 105°C makes it ideal for commercial applications requiring reliable connectivity.
48405-0003
Molex 48405-0003 USB connector has 9 contacts with tin finish, glass-filled polyethylene insulator, and nickel shell. Ideal for telecom/datacom applications, it features a right-angle mounting style on board with female contact gender and solder termination.
1734035-4
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Material: COPPER ALLOY; Insulator Material: GLASS FILLED POLYAMIDE6T; Mixed Contacts: NO;
RJMG1BD3B8K1ANR
Amphenol RJMG1BD3B8K1ANR is a Telecom & Datacom Connector with 8 contacts. Features include Tin (Sn) termination, Polyamide/Polyethylene insulator, and Gold Flash over Nickel mating contact finish. Ideal for board mounting in telecom and datacom applications requiring a right-angle jack connector.
UC-31PFFH-QF7001
USB CONNECTOR;
USB3131-30-0230-A
Global Connector Technology
USB3131-30-0230-A by Global Connector Technology is a USB connector with 5 contacts, gold over nickel finish, and liquid crystal polymer insulator. It is used in telecom & datacom applications, has a dielectric voltage of 100VAC, and operates b/w -55 to 85°C.
RJHSE-5080
Amphenol RJHSE-5080 is a Telecom & Datacom Connector with 8 contacts, 0.62"x.52"x.59" dimensions, and POLYETHYLENE insulator. It features Matte Tin termination, GOLD mating finish, and PHOSPHOR BRONZE contact material. Ideal for board and panel mounting in telecom applications due to its polarized housing and right angle mounting style.
3001
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; IEC Conformity: NO; Mounting Type: CABLE; DIN Conformance: NO; Mixed Contacts: NO;
USB-RS422-WE-1800-BT
FTDI
USB-RS422-WE-1800-BT by FTDI features USB2.0 A male connector with 9 contacts, operating temp range of -40 to 85°C. Ideal for telecom/datacom applications, it offers polarized housing and locking mounting option for secure cable termination.
CX60-24S-UNIT
Hirose Electric
USB CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);
95501-6889
Molex 95501-6889 is a Telecom & Datacom Connector with 0.6" body length, 0.453" width, and 0.809" depth. Insulation resistance of 500M ohm, matte tin over nickel termination finish. Ideal for telecom and datacom applications due to its surface mount termination type and right angle mounting style.
1546413-3
TE Connectivity
TE Connectivity 1546413-3 is a Telecom & Datacom Connector with EMI shielding, ABS insulator, and 30u plating. It has 8 contacts, rated for 1.5A signal current, suitable for panel mounting in applications requiring reliable data transmission at temperatures ranging from -20 to 80°C.
2301994-5
TE Connectivity 2301994-5 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and features right-angle mounting for board lock applications.
74320-1003
74320-1003 by Molex is a Telecom & Datacom Connector with 0.075" pitch, 1.45" body length, and 1000000000 ohm insulation resistance. It is used in applications requiring a connector with 29 contacts, right-angle mounting style, and solder termination for commercial reliability.
2-406549-1
TE Connectivity 2-406549-1 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 rated. Features include insulation resistance of 500MΩ, operating temp range -40 to +85°C, and durability of 750 cycles. Ideal for telecom/datacom applications requiring reliable signal transmission in harsh environments.
RJHSE-5380-A8
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
RJCSE-5380-01
RJCSE-5380-01 by Amphenol is a telecom and datacom connector with a body size of 0.64" x 0.53" x 0.615". It has 8 contacts, a 50u plating thickness, and is made of stainless steel. This right angle jack connector is suitable for surface mount applications in the telecommunications and data communications industry.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved