Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 10-84-5021 is a rectangular power connector with 2 contacts, suitable for board mounting. It features an insulation resistance of 1000000000 ohm and dielectric voltage withstand of 500VAC. With a temperature range from -55 to 105 °C, it is commonly used in commercial applications requiring reliable power connections.
Median Price
$0.585
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.570
100+ parts
$0.409
1k+ parts
$0.333
10k+ parts
$0.306
DigiKey
$0.600
$0.394
-
Nova Conductors
$0.303
Digiode
$0.399
Vyrian
VNN
Q Components
Continental Prestige Electronics
$0.297
Argo Parts USA
$0.294
Netroflash
Semicontronic
$0.357
$0.348
$0.346
Corphita
$0.378
Andel Nordic
$9.558
$9.176
Assy Fe
Authorized Procurement Solutions
EMSNET (Excess)
High insulation resistance ensures that the power connectors will maintain their functionality and prevent electrical leakage over a long period of time.
The high dielectric voltage rating makes these power connectors suitable for applications where they may be subjected to high voltage levels, ensuring safe operation.
Compact body depth allows for easy installation in tight spaces without taking up excessive room.
Polyester insulator material provides good mechanical strength and electrical insulation properties, enhancing the reliability of the connectors.
High maximum operating temperature makes these connectors suitable for a wide range of environments and ensures stable performance even in high-temperature conditions.
Low minimum operating temperature allows the power connectors to function reliably in cold environments without any issues.
Thick plating ensures good conductivity and corrosion resistance, prolonging the lifespan of the connectors.
Rectangular design provides a secure and stable connection, ideal for power applications where reliability is crucial.
UL 94V-0 flammability rating indicates that the connectors are flame-resistant, adding an extra layer of safety in case of fire hazards.
Having multiple contacts allows for the power connectors to carry more current and provide a more secure connection.
Power Connectors 10-84-5021 attributes and parameters. Explore more Power Connectors devices from Molex
Body Depth:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
10-84-5021 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
BSS123,215
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
1723104108
Molex
Molex 1723104108 Power Connector has dimensions of 1.232" x 0.352" x 0.614". Made of Liquid Crystal Polymer, it operates b/w -40°C to 105°C. With 8 contacts, it is used for board mounting applications with solder termination and UL flammability rating of 94V-0.
03-06-1023
Molex 03-06-1023 is a rectangular power connector with POLYAMIDE insulator. It has 0.34" x 0.194" x 0.812" dimensions, operating from -40 to 105°C. With 2 contacts, it's ideal for cable mounting in commercial applications requiring reliable male/female crimp termination.
39-01-3123
Molex 39-01-3123 is a rectangular power connector with 12 contacts, rated at 9A signal current. Featuring a mating contact pitch of 0.165", it has an insulation resistance of 1G ohm and can withstand up to 1500VAC. Ideal for commercial applications requiring durable wire termination in temperatures ranging from -40°C to 105°C.
6643220-1
TE Connectivity
TE Connectivity's 6643220-1 is a rectangular power connector with stamped contact design. It has a rated current of 35A, operates b/w -40 to 105°C, and features compliant boardlock mounting. Ideal for commercial applications requiring reliable female connectors with press fit termination in a right angle receptacle design.
10-10-1033
The Molex 10-10-1033 is a rectangular power connector with 3 contacts, rated at 7A. It features a mating contact pitch of 0.2", insulation resistance of 500000000000 ohm, and dielectric voltage of 1500VDC. Ideal for board mounting applications in commercial settings due to its durability and reliability.
42818-0312
The Molex 42818-0312 is a rectangular power connector with 0.394" mating contact pitch, suitable for panel mounting. Featuring a body length of 1.625", insulation resistance of 1 Gohm, and operating temperatures from -40°C to 105°C, it is ideal for commercial applications requiring reliable power connections.
350782-1
TE Connectivity's 350782-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 9 contacts, rated at 19A signal current, and operates b/w -55 to 105°C. Ideal for commercial applications, it offers high durability with a mating contact spacing of 0.25 inches and UL94V-0 flammability rating.
43650-0624
The Molex 43650-0624 is a rectangular power connector with 6 contacts made of brass. It features TIN over nickel termination finish and glass-filled liquid crystal polymer insulator material. Ideal for board mounting in applications requiring male contact gender and UL 94V-0 flammability rating.
10-18-1120
Molex 10-18-1120 is a rectangular power connector with 12 contacts, POLYESTER insulator, and 0.98" x 0.74" x 0.42" dimensions. It operates b/w -40°C to 105°C, suitable for board mounting in commercial applications requiring durable male connectors with solder termination.
15-24-6182
The Molex 15-24-6182 is a rectangular power connector with 18 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards meeting CSA and UL requirements.
39-29-9085
Molex 39-29-9085 is a rectangular power connector with 8 contacts, featuring a mating contact pitch of 0.165" and insulation resistance of 1Gohm. It has a dielectric voltage rating of 1500VAC, suitable for board mounting applications in commercial settings due to its durability and reliability.
350429-1
TE Connectivity 350429-1 is a rectangular power connector with 3 contacts, rated at 12A. Insulation resistance of 100MΩ and operating temperature range from -40 to 105°C make it ideal for commercial applications. With solder termination and natural insulator color, it offers durability of 50 cycles.
2147511103
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
39-01-2161
Molex 39-01-2161 is a rectangular power connector with 16 contacts, POLYAMIDE insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for commercial applications requiring durable crimp termination in panel mounting setups. With UL certification and polarization key, it offers reliable connectivity for power systems.
956
Anderson Power Products
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Manufacturer Series: YC; Body or Shell Style: RECEPTACLE;
1-1123824-1
TE Connectivity 1-1123824-1 is a RECTANGULAR POWER CONNECTOR with rated voltage of 250V and current of 8A. It has POLYAMIDE66 insulator, BRASS shell material, and operates b/w -25 to 105 °C. Ideal for board mounting applications requiring reliable power connections.
1-770174-0
TE Connectivity's 1-770174-0 is a rectangular power connector with 4 contacts, rated at 600V and 9.5A. Featuring polyamide insulation, it operates b/w -55 to 105°C, ideal for board mounting applications requiring durability and reliability in commercial settings.
VLR-04VN
J S T Mfg
VLR-04VN by J S T Mfg is a POWER CONNECTOR with POLYAMIDE66 insulator material. It features 4 contacts, CRIMP termination, and FEMALE contact gender. Ideal for applications requiring reliable power connections in various industries.
1445022-4
TE Connectivity's 1445022-4 is a Power Connector with Mating Contact Pitch of 0.118", rated for 250V and operating temperatures from -40 to 105°C. It features a POLYAMIDE66 insulator, suitable for commercial applications in cable mounting setups requiring crimp terminations.
1-316132-5
TE Connectivity 1-316132-5 is a RECTANGULAR POWER CONNECTOR with GLASS FILLED POLYESTER insulator. It has 5 contacts, rated for 15A current, and operates b/w -55 to 105°C. Ideal for board mounting applications with SOLDER termination clips.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
10-84-5041
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
10-84-4020
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
10-84-5040
The Molex 10-84-5040 is a rectangular power connector with 4 contacts, tin finish, and 138u plating thickness. It has an insulation resistance of 1Gohm, withstands up to 500VAC, and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
10-84-5090
10-84-4030
10-84-4090
Molex 10-84-4090 is a rectangular power connector with 9 contacts, Tin finish, and Polyamide66 insulator. It has an insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting in commercial applications due to its durability and UL certification.
10-84-5020
The Molex 10-84-5020 is a rectangular power connector with 2 contacts, featuring bright tin termination finish and polyester insulator material. It has an insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
10-84-5060
10-84-4060
10-84-4122
10-84-5030
10-84-5120
10-84-5091
10-84-4042
10-84-5023
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2800VAC; No. of Connectors: ONE;
10-84-5031
The Molex 10-84-5031 is a rectangular power connector with 3 contacts. It has an insulation resistance of 1GΩ and can withstand a voltage of 500VAC. With a temperature range of -55°C to 105°C, it is suitable for various commercial applications requiring reliable power connections.
10-84-5032
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2800VAC; No. of Connectors: ONE;
10-84-5042
10-84-5043
10-84-5093
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved