Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 10-10-1091 is a 1.8" x 0.406" x 0.453" board connector with 9 contacts, POLYAMIDE insulator, and tin finish. It has a dielectric voltage of 1000VAC, insulation resistance of 1Gohm, and operates b/w 0-75°C. Ideal for commercial applications requiring a durable right-angle plug with solder termination and UL certification.
Median Price
$1.090
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.090
100+ parts
$1.330
1k+ parts
$1.020
10k+ parts
-
DigiKey
$0.750
$0.730
$0.660
Chip1Stop
$1.030
$0.999
$0.848
Verical
$1.151
$0.972
Farnell
$1.240
$1.200
Powell Electronics
$0.920
$0.890
$0.810
Master Electronics
$0.857
$0.836
$0.765
Newark
$1.400
$1.070
Vyrian
TestEquity
$0.970
Digiode
$1.986
TME
IBS Electronics
$1.024
$0.996
$0.912
Nova Conductors
VNN
Semicontronic
$0.640
$0.624
$0.621
Corphita
$1.881
Andel Nordic
$2.674
$2.567
Authorized Procurement Solutions
Assy Fe
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
Aranea Global
EMSNET (Excess)
The long body length allows for better stability and secure connection when attached to a board.
High insulation resistance ensures minimal risk of electrical leakage or shorts, enhancing safety and reliability.
The high dielectric voltage withstand capability enables this connector to handle high voltage applications safely.
Specifically designed for board-to-board connections, ensuring compatibility and ease of installation.
Having multiple contacts allows for more connection options and flexibility in circuit design.
The right-angle mounting style saves space and provides a more efficient layout for the connector on the board.
The square pin socket design ensures a secure and stable connection with mating connectors, reducing the risk of signal loss or disconnection.
Headers & Edge Type Connectors 10-10-1091 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
10-10-1091 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Obsolescence/ EOL - DK OBS NOTICE
PCN Assembly/Origin - Mult Devs Assembly Location 26/Jul/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
1554216002
Molex
WIRE AND CABLE;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Surge Components
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Thinking Electronic Industrial
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
Brightking
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
Diotec Semiconductor Ag
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Vishay Telefunken
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
BM05B-SRSS-TBT(LF)(SN)
J S T Mfg
BM05B-SRSS-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 5 contacts, COPPER ALLOY material, and TIN finish. It is a STRAIGHT mounting style connector for surface mount applications in headers & edge type connectors category.
22-23-2021
Molex 22-23-2021 header connector features 0.1" mating contact pitch, 0.194" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with UL and CSA standards compliance.
PHR-2
PHR-2 by J S T Mfg is a 2-contact BOARD CONNECTOR with 0.079" pitch, 800VAC voltage withstand, and 1000000000 ohm insulation resistance. It features POLYAMIDE66 insulator for -25 to 85 °C operation. Ideal for CABLE mounting in applications requiring FEMALE contact gender and CRIMP termination.
10124017-1022125LF
Amphenol Communications Solutions
Amphenol Communications Solutions' 10124017-1022125LF is a 25-contact board stacking connector with 0.039" mating contact pitch and 707VAC dielectric voltage. Ideal for PCB applications, it features gold flash termination finish, liquid crystal polymer insulator, and male contact gender.
B3B-PH-K-S(LF)(SN)
B3B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator, operates b/w -25 to 85 °C, and features TIN contact finish. Ideal for applications requiring reliable board-to-board connections in electronic devices.
B04B-PASK-1(LF)(SN)
B04B-PASK-1(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C. Featuring tin finish contacts and UL-rated insulation material, it offers high insulation resistance of 1000000000 ohm and dielectric voltage withstand of 800VAC. Ideal for PCB mounting with solder termination, this male connector has a contact resistance of 20 mohm and can handle up to 3A signal current.
DF11-14DS-2C
Hirose Electric
DF11-14DS-2C by Hirose Electric is a 2-row, 14-contact board connector with a mating contact pitch of 0.079". Featuring TIN termination finish and polyamide insulator, it operates b/w -30°C to 85°C. Ideal for cable mounting applications, it offers a durability of 30 cycles and rated current of 2A for signal transmission.
BM08B-SRSS-TB(LF)(SN)
BM08B-SRSS-TB(LF)(SN) by J S T Mfg is a 8-contact BOARD CONNECTOR with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCBs, it features POLYAMIDE insulator, COPPER ALLOY contacts, and operates b/w -25 to 85 °C.
FTSH-105-01-L-DV-K-A-P
Samtec
Samtec's FTSH-105-01-L-DV-K-A-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features gold over nickel finish, liquid crystal polymer insulator, and phosphor bronze contact material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
853-93-010-20-001000
Mill-max Mfg
Mill-max Mfg 853-93-010-20-001000 is a 10-contact, dual-row board connector with tin/lead finish. Featuring beryllium copper contacts, it's ideal for right-angle mounting on boards. This socket connector has a pitch of 1.27mm and is suitable for various electronic applications.
826629-2
TE Connectivity 826629-2 is a board connector with 0.1" pitch, suitable for commercial applications. It features tin finish, 5A signal current rating, and operates b/w -65 to 105°C. Ideal for use in electronics requiring a male square pin socket contact style on a rectangular PCB pattern.
50-57-9006
The Molex 50-57-9006 is a board connector with mating contact pitch of 0.1". Featuring glass filled polyester insulator, it has 6 contacts and UL94V-0 flammability rating. Ideal for commercial applications, this plug-style connector offers crimp termination and locking mounting option.
5034801000
Molex 5034801000 FFC/FPC connector with 10 contacts, 0.020" pitch, and 50000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings due to its 200VAC dielectric voltage and -40 to 85°C operating temperature range.
61300811121
Wuerth Elektronik & Kg
61300811121 by Wurth Elektronik is a BOARD CONNECTOR with 8 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and can withstand up to 500VAC. Ideal for commercial applications, this connector operates b/w -40°C to 125°C on PCBs with a rectangular contact pattern.
640456-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Manufacturer Series: 640456; Mixed Contacts: NO;
1-2103124-1
TE Connectivity 1-2103124-1 is a BOARD CONNECTOR with GLASS FILLED POLYAMIDE insulator. It has 2 contacts, S0P2 arrangement, and operates b/w -40 to 140°C. Ideal for commercial applications requiring a MALE connector with BLADE PIN-SKT style in a RECEPTACLE shell.
DT04-3P-E003
TE Connectivity's DT04-3P-E003 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125°C. With a UL flammability code of 94V-0, it is ideal for applications requiring a polarized male connector with strain relief mounting.
357-074-442-278
Edac
Edac 357-074-442-278 is a CARD EDGE CONNECTOR with 74 contacts in 2 rows, featuring a 0.156" pitch and rated for 5A signal current. With UL certification, it has a temperature range of -40 to 105°C, suitable for applications requiring high insulation resistance and dielectric voltage withstand capabilities.
S3B-XH-A
S3B-XH-A by J S T Mfg is a 3-contact board connector with brass contacts and tin over copper finish. It operates b/w -25°C to 85°C, UL94V-0 rated for flammability. Ideal for right-angle mounting in applications requiring reliable soldered connections on boards.
1-640250-5
TE Connectivity 1-640250-5 is a board connector with 15 contacts, 0.156" pitch, and 6.5A signal current rating. It features glass-filled polyamide insulation, operates b/w -55 to 105°C, and has a durability of 25 cycles. Ideal for commercial applications requiring reliable female connectors with crimp termination in a polarized housing design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
10-10-1061
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
10-10-1081
The Molex 10-10-1081 header connector features a body length of 1.6", insulation resistance of 1000000000 ohm, and dielectric voltage withstand of 1000VAC. Ideal for board connections in commercial applications, this female connector has a right-angle mounting style with solder termination and natural insulator color.
101-00349-68
Amphenol
PCB CONNECTOR; Option: GENERAL PURPOSE; MIL Conformity: NO; DIN Conformance: NO; Mating Contact Finish: GOLD (15); IEC Conformity: NO;
10106813-023112LF
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; Mounting Style: STRAIGHT; MIL Conformity: NO; IEC Conformity: NO;
101003136802
PCB CONNECTOR; Option: GENERAL PURPOSE; JESD-609 Code: e3; DIN Conformance: NO; Mating Contact Finish: GOLD (10) OVER NICKEL (50); Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
10108888-R10253SLF
Amphenol Communications Solutions' 10108888-R10253SLF is a board connector with 35 contacts, featuring mixed power-copper alloy and signal-phosphor bronze materials. It has a mating contact pitch of 0.079", insulation resistance of 1G ohm, and operates b/w -40 to 125°C. Ideal for applications requiring durable connectors with high mating cycles and UL certification.
101-00303-68
PCB CONNECTOR; Option: GENERAL PURPOSE; MIL Conformity: NO; JESD-609 Code: e3; Mating Contact Finish: GOLD (15); DIN Conformance: NO;
1010027182
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 354VAC; No. of Connectors: ONE; Contact Resistance: 100 mohm;
10106139-4027101LF
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2500VDC; No. of Connectors: ONE; Contact Arrangement: S108P4;
10-10-1031
10101704J6#2A
Amphenol Icc
PCB CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO; Body or Shell Style: SOCKET;
10108777-10142CLF
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 424VAC; No. of Connectors: ONE; Body Length: 2.205 inch;
10108777-10030ALF
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 424VAC; No. of Connectors: ONE; JESD-609 Code: e3;
10106268-0527101LF
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 125;
10106813-021112LF
The Amphenol Communications Solutions 10106813-021112LF is a 2-row, 20-contact BOARD STACKING CONNECTOR with gold termination finish. It has a terminal pitch of 0.5mm and UL Flammability Code of 94V-0. Ideal for board mounting applications, this hermaphroditic connector is designed for surface mount termination in straight mounting style configurations.
10108777-10000RLF
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 424VAC; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 85;
10106813-031112LF
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; Termination Contact Finish: Gold (Au); Termination Type: SURFACE MOUNT; JESD-609 Code: e4;
10-10-1054
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VDC; No. of Connectors: ONE;
10-10-1071
10-10-1084
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved