Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Material: BRASS; Body Depth: .134 inch; Mating Contact Finish: NOT SPECIFIED;
Median Price
$1.500
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
$1.430
10k+ parts
Vyrian
Digiode
Corphita
Other Function RF Connectors 0734155590 attributes and parameters. Explore more Other Function RF Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
Insulator Material:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
0734155590 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1552200168
Molex
WIRE AND CABLE;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
Rugao Dachang Electronic
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FFA.00.250.CTAC29Z
Lemo Usa
FFA.00.250.CTAC29Z by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency range. Ideal for cable mounting applications requiring low VSWR and solder termination for male plug connectors.
A-4JA
Amphenol
A-4JA by Amphenol is a SNAP RF CONNECTOR with 50 ohm impedance and 1.4 VSWR, suitable for applications up to 6 GHz. It features BOARD mounting and SURFACE MOUNT termination, ideal for high-frequency electronic systems requiring reliable signal transmission.
5-1634552-1
TE Connectivity 5-1634552-1 RF Connector features threaded coupling, polymethylpentene insulator, and 75 ohm impedance. Ideal for commercial applications with a frequency up to 2 GHz, operating temperature range of -55 to 85°C, and durability of 50 cycles.
292-101P-52S
Amphenol 292-101P-52S is a threaded RF connector with gold finish, suitable for cables. Features include 50 ohm impedance, 40 GHz frequency, and low VSWR of 1.3. Ideal for high-frequency applications requiring reliable signal transmission.
1996777-2
TE Connectivity's 1996777-2 RF SMPM CONNECTOR has a temp range of -55 to 105°C, with 8 contacts and characteristic impedance of 50 ohm. It features stainless steel shell material, suitable for board mounting applications.
292-100J-52S
Amphenol 292-100J-52S is a threaded RF 2.92mm connector with gold shell finish, suitable for panel mounting. It has a max operating frequency of 40GHz, characteristic impedance of 50Ω, and operates b/w -65 to +165°C. Ideal for applications requiring high-frequency signal transmission in demanding environments.
128-0711-201
Cinch Connectivity Solutions
128-0711-201 RF connector by Cinch Connectivity Solutions features a gold termination finish, SNAP coupling type, and 50 ohm impedance. Ideal for applications requiring a max operating frequency of 6 GHz, such as surface mount boards needing reliable female receptacle connectors.
3221-40132
Sv Microwave
RF SMPM CONNECTOR;
2337019-1
TE Connectivity 2337019-1 RF Connector features snap coupling, polyethylene insulator, and gold flash shell finish. With a characteristic impedance of 50 ohm and max operating frequency of 6 GHz, it is ideal for board mounting applications in electronic devices. Operating temperature ranges from -40 to 85°C make it suitable for various environments.
0734160010
Molex 0734160010 is a RF 7/16 DIN CONNECTOR with SNAP coupling, suitable for 50 ohm systems up to 7 GHz. It features FEMALE contact gender and JACK body style, designed for PANEL mounting in straight configuration. Ideal for high-frequency applications requiring reliable RF connections.
SMP-PL-P-HH-ST-EM3
Samtec
Samtec's SMP-PL-P-HH-ST-EM3 RF connector features threaded coupling, gold contact finish, and 50 ohm impedance. Ideal for applications requiring high-frequency signals up to 40 GHz, such as in board-mounted systems needing reliable solder termination.
M49142/08-0006
Winchester Interconnect
M49142/08-0006 by Winchester Interconnect is a MIL-conformant RF connector with threaded coupling, gold contact finish, and PTFE insulator. It is a plug-type connector for cable mounting in straight orientation, ideal for high-frequency applications requiring secure connections.
272118
Amphenol 272118 RF connector features threaded coupling, 50 ohm impedance, and brass shell. Ideal for applications requiring high-frequency signal transmission up to 75 GHz. Suitable for use in environments with temperatures ranging from -65°C to 165°C.
PL155-47
Vertiv
RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Shell Material: BRASS; Maximum Operating Frequency: .5 GHz;
SMZ6121A6-3GT30G-6-75
Amphenol's SMZ6121A6-3GT30G-6-75 RF Connector features 5000000000 ohm Insulation Resistance, 2100VAC Dielectric Withstanding Voltage, and 1.2 Voltage Standing Wave Ratio. Ideal for commercial applications with a max operating frequency of 3 GHz, this connector is designed for use in RF systems requiring high reliability and a characteristic impedance of 75 ohm.
272110
Amphenol 272110 RF connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring male plug connectors with silver finish over copper, suitable for cables with operating temperatures ranging from -65 to 165°C and frequencies up to 75 GHz.
222113
Amphenol 222113 RF Connector: 50 ohm impedance, 1 GHz frequency, TIN LEAD finish. Used in RF applications for cables with PLUG body style and CRIMP termination. Operating temp -40 to 85°C.
MS-156C(20)
Hirose Electric
The Hirose Electric MS-156C(20) RF connector features 0.4 dB insertion loss, 1.5 VSWR, and operates up to 11 GHz. It is a surface mount receptacle with TIN termination contact finish, ideal for high-frequency board applications.
03S12L-000S3
Rosenberger Hochfrequenztechnik & Kg
Rosenberger Hochfrequenztechnik & Kg's 03S12L-000S3 RF Connector features threaded coupling, polystyrol insulator, and male contact gender. With a VSWR of 2.62, it operates up to 26.5 GHz, making it ideal for high-frequency applications in telecommunications and aerospace industries.
82_MMBX-S50-0-3/111_NE
Huber+suhner Ag
82_MMBX-S50-0-3/111_NE RF connector by Huber+suhner Ag features a characteristic impedance of 50 ohm, max operating frequency of 12.4 GHz, and VSWR of 1.5. Ideal for board mounting applications, this female jack connector with snap coupling is designed for high-frequency signal transmission in electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved