Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; Contact Design: LOOSE; Assembly Item Name: CONTACT; Material: PHOSPHOR BRONZE; Mounting Style: STRAIGHT; Minimum Wire Size: 22 AWG;
Median Price
$0.375
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DF Sales Co.
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
Classic Components Corporation
Vyrian
Corphita
Assembly Products 02-08-1237 attributes and parameters. Explore more Assembly Products devices from Molex
Assembly Item Name:
Cable Types:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Design:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
STM32H753ZIT6
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
Micropac Industries
SZE-002T-P0.3
J S T Mfg
SZE-002T-P0.3 by J S T Mfg is a CRIMP terminal CONTACT for 28-24 AWG wires with 0.0299-0.0472 inch cable entry. It features FEMALE contact gender, STRAIGHT mounting style, and is made of COPPER ALLOY. Ideal for assembly products requiring precise wire connections in various applications.
1SNK908310R0000
Abb
CONNECTOR ACCESSORY; Rated Current: 57 A; Insulator Material: POLYAMIDE; Rated AC Voltage: 600 V; Maximum Operating Temperature: 110 Cel; Rated DC Voltage: 600 V;
880810-1
TE Connectivity
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: BOOT; Maximum Wire Size: 0 AWG;
13711542
Aptiv
Aptiv 13711542 CONTACT is a MALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assemblies.
1-968849-1
TE Connectivity's 1-968849-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 15A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.051 to 0.083 inch.
643075-2
TE Connectivity 643075-2, an Assembly Product with UL approval, features MTA-100 connector usage. With a temp range of -40 to 85°C, it supports up to 0 AWG wire size. Made of polyamide, it is ideal for various electrical assembly applications.
77138-101LF
Amphenol Communications Solutions
Amphenol's 77138-101LF CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and BELLOWED CONTACT style. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and wire sizes ranging from 30 AWG to 26 AWG.
77138-001LF
Amphenol's 77138-001LF CONTACT features CRIMP terminals for 30-26 AWG wires. With a PHOSPHOR BRONZE build, it offers FEMALE gender and BELLOWED style for STRAIGHT mounting. Ideal for Assembly Products, this contact has an 8 finish thickness.
SSH-003GA-P0.2-H
J S T Mfg's SSH-003GA-P0.2-H is a CRIMP terminal CONTACT with 32-28 AWG wire size range, rated for 1A current at 50V AC/DC. With approvals from CSA and UL, it operates b/w -25 to 85 °C, ideal for applications requiring FEMALE contacts in straight mounting style.
1062-12-0166-PS
TE Connectivity's 1062-12-0166-PS is a FEMALE CRIMP CONTACT for CONNECTORS. It supports wire sizes from 14 AWG to 12 AWG with STAMPED design. The RND PIN-SKT style contact is ideal for STRAIGHT mounting in various assembly products.
1-206062-6
TE Connectivity's 1-206062-6 cable clamp is UL approved with shell size 11. It accommodates up to 0 AWG wire and 0.329" cable entry, made of polyethylene for straight mounting with a 5/8-24 UNEF-2B screw option. Ideal for securing cables in various assembly applications.
8655MH1501BLF
AMPHENOL ICC
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
3231
Heyco Products
CONNECTOR ACCESSORY; Material: NYLON66; Assembly Item Name: CORDGRIP; Maximum Cable Entry: .45 inch; Maximum Operating Temperature: 115 Cel; Minimum Cable Entry: .17 inch;
M85049/128-4
CONNECTOR ACCESSORY; Material: STEEL; Minimum Operating Temperature: -65 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 200 Cel; Wire Gauge (AWG): 0;
1-794606-2
TE Connectivity 1-794606-2 is a crimp terminal with approvals from CSA, UL, and VDE. Featuring stranded construction, it has a rated voltage of 250V and can accommodate wire sizes ranging from 24 to 20 AWG. Ideal for power applications with a max current of 5A, this female contact is designed for use in discrete wire cables up to 0.06 inch entry size.
216-208
Wago
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 10 AWG; MIL Conformity: NO; Assembly Item Name: FERRULE; IEC Conformity: NO; Additional Features: STANDARD: DIN 46228;
13697414
Aptiv 13697414 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has FEMALE contact gender with 0.0551-0.0748 inch cable entry. Ideal for automotive wiring harness assemblies due to its precise crimping and compatibility with specified cable types.
RC16M23K
Souriau-sunbank Connection Technologies
RC16M23K by Souriau-sunbank is a CRIMP terminal CONTACT with MACHINED design for 750V AC, 13A current. It's used in RC/RM SERIES CONNECTOR for SIGNAL applications, accepting wire sizes from 30-14 AWG and COAXIAL cables up to 3.2".
SXA-001T-P0.6L
SXA-001T-P0.6L by J S T Mfg is a CRIMP terminal CONTACT with 3A rated current, suitable for XA CONNECTOR applications. It has approvals from CSA, TUV, and UL, with a temperature range of -25 to 85 °C. The FEMALE contact is made of PHOSPHOR BRONZE material and supports wire sizes from 26 to 22 AWG.
L17DM53745-7
Amphenol
The Amphenol L17DM53745-7 is a male contact assembly product with a round pin-socket contact style made of brass. It has a rated current of 20A and can operate at temperatures up to 155°C. This straight mounting terminal type with 20 finish thickness is commonly used in industrial applications requiring reliable electrical connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Molex
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved