Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FREQUENCY DOUBLER; JESD-609 Code: e3; Minimum Operating Frequency: 7500 MHz; Maximum Input Power (CW): 12 dBm; Terminal Finish: Matte Tin (Sn); Maximum Operating Frequency: 25000 MHz;
Median Price
$43.950
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Chip1Stop
1+ parts
-
100+ parts
$45.000
1k+ parts
10k+ parts
Verical
$42.900
RF/Microwave Frequency Multipliers XX1000-BD-000V attributes and parameters. Explore more RF/Microwave Frequency Multipliers devices from Mimix Broadband
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
RF or Microwave Device Type:
Terminal Finish:
Wednesday, June 2, 2010 LOWELL, MA (USA) – June 2, 2010 – M/A-COM Technology Solutions Inc. (M/A-COM Tech), a leading supplier of semiconductors, components, and subassemblies for use in RF, microwave and millimeter-wave applications, announced today the completion of a previously-announced merger transaction that adds Mimix Broadband, Inc. (Mimix) and its subsidiaries to the M/A-COM Tech family of companies. Mimix is a fabless supplier of high performance GaAs semiconductors from DC to 50 GHz for RF, microwave and millimeter-wave applications. Financial terms of the merger were not disclosed.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
HMC577LC4B
Analog Devices
Analog Devices' HMC577LC4B is a RF/Microwave Frequency Doubler with 50 ohm impedance, operating from 27-31 GHz. It can handle up to 13 dBm CW input power and operates b/w -40°C to 85°C. Ideal for applications requiring frequency multiplication in high-frequency RF systems.
CGD1044H,112
NXP Semiconductors
FREQUENCY DOUBLER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Construction: MODULE; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e4;
MLD-0416LSM
Marki Microwave
MLD-0416LSM by Marki Microwave is a RF/Microwave Frequency Multiplier with max input power of 25 dBm. It operates as a frequency doubler from 2 GHz to 8 GHz, featuring a max conversion loss of 17 dB. This component is designed for surface mount applications in the temperature range of -55°C to 100°C.
HMC188MS8E
HMC188MS8E by Analog Devices is a RF/Microwave Frequency Multiplier with max input power of 27 dBm, operating frequency range from 1250 MHz to 3000 MHz. It utilizes GAAS technology for frequency doubling applications in components with 8 terminals and matte tin finish, suitable for surface mounting in various electronic systems.
HMC444LP4E
Analog Devices' HMC444LP4E is a RF/Microwave Frequency Multiplier with 20 dBm CW input power, operating from -40 to 85°C. It functions as a Frequency Quadrupler, supporting frequencies from 9900 to 11200 MHz. Ideal for applications requiring high-frequency multiplication in various environments.
XX1000-QT-0G0T
Celeritek
FREQUENCY DOUBLER; Maximum Input Power (CW): 12 dBm; Construction: COMPONENT; Additional Features: HIGH RELIABILITY; Maximum Operating Frequency: 22500 MHz; Minimum Operating Frequency: 7500 MHz;
HMC445LP4E
Analog Devices' HMC445LP4E is a RF/Microwave Frequency Multiplier with 20 dBm CW input power, operating from -40 to 85 °C. It functions as a Frequency Quadrupler, supporting frequencies from 9900 to 11000 MHz. Ideal for applications requiring high-frequency multiplication in various electronic systems.
HMC576LC3BTR
Analog Devices' HMC576LC3BTR is a GaAs RF frequency doubler with 12 terminals, gold finish, and operates b/w -40°C to 85°C. It requires a 5V power supply and comes in a surface mount package. Ideal for RF/microwave applications requiring frequency multiplication.
CGD1042H,112
FREQUENCY DOUBLER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Maximum Supply Current: 470 mA; Maximum Operating Temperature: 100 Cel; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
HMC577LC4BTR
Analog Devices' HMC577LC4BTR is a GaAs technology RF frequency doubler with 24 terminals, operating from -40 °C to 85°C. It has a power supply of 5V and gold over nickel terminal finish. Ideal for RF/microwave applications requiring surface mounting features.
HMC368LP4TR
Analog Devices' HMC368LP4TR is a GaAs technology RF frequency doubler with 24 terminals. It operates from 4500 MHz to 8000 MHz, handling up to 20 dBm CW input power. This surface-mount component has a VSWR of 1.92 and is ideal for RF/microwave applications requiring frequency multiplication.
HMC370LP4E
Analog Devices' HMC370LP4E is a RF/Microwave Frequency Multiplier with 24 terminals, operating at 14.4-16.4 GHz range. It has a max input power of 20 dBm and operates on a 5V supply, drawing 73mA current. Ideal for applications requiring frequency quadrupling in the temperature range of -40 to +85°C.
CGD1044HI
FREQUENCY DOUBLER; Maximum Operating Frequency: 1003 MHz; Characteristic Impedance: 75 ohm; Construction: MODULE; Minimum Operating Frequency: 40 MHz;
HMC578
Analog Devices' HMC578 is a RF/Microwave Frequency Multiplier with max input power of 13 dBm. Operating b/w -55 to 85°C, it's a frequency doubler for 24-33 GHz applications. Featuring gold terminal finish and 50 ohm impedance, it's ideal for high-frequency signal processing.
HMC814LC3BTR
HMC814LC3BTR by Analog Devices is a RF/Microwave Frequency Multiplier with a plastic/epoxy package. It operates at temperatures ranging from -40°C to 85°C and requires a power supply of 5V. This frequency doubler has 12 terminals and a max supply current of 100mA, making it suitable for various RF and microwave applications.
HMC-C034
Analog Devices' HMC-C034 is a COAXIAL RF/Microwave Frequency Multiplier with 50 ohm impedance. It operates from 16-23 GHz, doubling input frequency up to 13 dBm power. Ideal for applications requiring high-frequency signal multiplication in temperature range of -55 to 85°C.
AMMC-6140-W10
Broadcom
FREQUENCY DOUBLER; Maximum Input Power (CW): 15 dBm; Minimum Operating Frequency: 10000 MHz; Maximum Supply Current: 40 mA; Construction: COMPONENT; Power Supplies (V): 4.5;
HMC204MS8G
Analog Devices' HMC204MS8G is a RF/Microwave Frequency Doubler with 50 ohm impedance, operating from 4-8 GHz. It can handle up to 27 dBm CW input power and has a conversion loss of 22 dB. This surface mount component is ideal for applications requiring frequency multiplication in the microwave range.
HMC916LP3ETR
Analog Devices' HMC916LP3ETR is a RF frequency tripler with 16 terminals, operating b/w -40 °C to 85°C. It requires a 5V power supply and features matte tin terminal finish. Ideal for applications requiring surface mounting in RF/Microwave systems.
HMC188MS8
HMC188MS8 by Analog Devices is a RF/Microwave Frequency Multiplier with max input power of 27 dBm. Operating from -40 to 85 °C, it's a GaAs technology frequency doubler for 1250-3000 MHz range. With 19 dB conversion loss, this surface mount component has 8 terminals and uses TIN LEAD finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Mimix Broadband
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved