Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MIC5393-PPYMT-TR by Microchip Tech is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Nominal Output Voltage of 3V, Max Dropout Voltage of 0.31V, and Operating Temperature range from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact spaces.
Median Price
$0.340
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Aranea Global
$0.333
$0.320
Microchip USA
$1.729
AZTECH Wire
$5.690
$5.460
$5.360
$5.250
Ampacity Inc.
$12.500
Kepictronics
Authorized Procurement Solutions
Fulton Briggs Corp.
Low dropout voltage ensures efficient power conversion and minimal power loss, making this regulator suitable for applications where a stable output voltage is required.
Surface mount capability allows for easy and compact integration into circuit boards, saving valuable space in electronic designs.
Wide operating temperature range ensures reliability and stability in various environmental conditions, making this regulator suitable for industrial and automotive applications.
Stable nominal output voltage ensures a consistent power supply to connected components, making this regulator ideal for sensitive electronic devices.
Fixed output voltage eliminates the need for external adjustments, simplifying circuit design and improving reliability.
Low load regulation ensures stable output voltage under varying load conditions, making this regulator suitable for applications with dynamic power requirements.
Fixed Regulators - Positive Multiple Output LDO MIC5393-PPYMT-TR attributes and parameters. Explore more Fixed Regulators - Positive Multiple Output LDO devices from Microchip Technology
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Dropout Voltage-2:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Maximum Output Voltage-2:
Minimum Output Voltage-2:
Nominal Output Voltage-2:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
MIC5393-PPYMT-TR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Packing Changes 10/Oct/2016
PCN Part Number - Micrel to Microchip PN Changes 7/Oct/2015
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Unitrode
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
FDLL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
TPS767D325QPWPRQ1
Texas Instruments
TPS767D325QPWPRQ1 by Texas Instruments is a PMOS technology-based LDO regulator with 2.5V and 3.3V output voltages, ideal for automotive applications due to AEC-Q100 screening level. It offers a max dropout voltage of 0.575V, can handle up to 1A output current, and operates in temperatures ranging from -40°C to 125°C.
MAX8530ETTKO
Analog Devices
Analog Devices' MAX8530ETTKO is a BICMOS technology-based LDO regulator with 2 outputs. It offers a max dropout voltage of 0.2V, operating temperature up to 150 °C, and a package style of small outline with very thin profile. Ideal for applications requiring fixed positive multiple output regulation in compact spaces.
LDR2518PT-R
LDR2518PT-R by STMicroelectronics is a fixed positive multiple output LDO regulator with a max dropout voltage of 0.8V and outputs of 1.8V and 2.5V. It supports up to 1A current, ideal for compact electronic devices. Its surface mount design ensures efficient space utilization in applications.
CS8251ET7
CS8251ET7 by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 1.8V and operates in temperatures ranging from -40 to 150 °C. Ideal for applications requiring stable voltage regulation in electronic circuits.
TPS71928-28DRVRG4
TPS71928-28DRVRG4 by Texas Instruments is a BICMOS technology-based LDO regulator with 2 outputs. It has a fixed output voltage of 2.8V and can handle a max input voltage of 6.5V, making it suitable for various applications requiring stable power supply in compact designs.
MCP1722-3310H/Q8B
MCP1722-3310H/Q8B by Microchip Technology is a CMOS technology-based LDO regulator with 3.3V and 10V output voltages, suitable for automotive applications due to AEC-Q100 screening. It offers dual outputs, max load regulation of 0.0165%, and can handle up to 55V input voltage with a small outline package style.
MIC5211-LXYM6-TR
Micrel
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 4 %; Maximum Output Voltage-1: 3.432 V;
LP5996SD-1833/NOPB
LP5996SD-1833/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.55V and 0.22V, making it suitable for applications requiring stable voltage regulation in tight spaces. With a small outline package style and dual terminal position, this CMOS technology regulator is ideal for compact electronic devices where space is limited.
LP5996SDX-2828/NOPB
LP5996SDX-2828/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.8V and 2.905V nominal output voltages, 0.15A and 0.3A max output currents respectively. It operates in a temperature range from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
TPS71247DRCR
TPS71247DRCR by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.7V min input voltage, 0.25A max output current for each of its 2 outputs, and 3% max voltage tolerance. It is ideal for applications requiring stable power supply with tight voltage regulation in compact electronic devices.
LP2967IBP-2626
LP2967IBP-2626 by Texas Instruments is a fixed positive multiple output LDO regulator with 2.6V nominal output voltage. It has a max dropout voltage of 0.425V, operates in temperatures ranging from -40 to 125°C, and supports surface mount installation. Ideal for applications requiring precise voltage regulation in compact electronic devices.
TPS780180300DRVR
TPS780180300DRVR by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with an output voltage of 1.8V and max current of 0.15A. It operates in a temperature range from -40 to 125°C, making it suitable for various applications requiring stable power supply in compact spaces. The package style is small outline with very thin profile, ideal for space-constrained designs needing efficient voltage regulation.
TLV71128512DSET
TLV71128512DSET by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.215 V and can handle an Operating Temperature range from -40 to 125 °C. Ideal for applications requiring precise voltage regulation in compact spaces.
LP5996SD-0833
LP5996SD-0833 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.55V and 0.22V, suitable for applications requiring stable voltage regulation in compact spaces. With a small outline package style and dual terminal position, it is ideal for space-constrained designs in various electronic devices.
LP5996SDX-3033
LP5996SDX-3033 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.55V and 0.22V, making it suitable for applications requiring stable voltage regulation in tight spaces. With a small outline package style and dual terminal position, it is ideal for compact electronic devices where space is limited.
LP2966IMMX-1830
LP2966IMMX-1830 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Nominal Output Voltage of 1.8V and 3V, with Max Dropout Voltage of 0.27V. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LP8900TLE-AACB
LP8900TLE-AACB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage-1 of 0.164 V and Max Output Current-1 of 0.2 A, making it ideal for applications requiring stable voltage regulation in compact electronic devices.
TPS70251PWPG4
TPS70251PWPG4 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a max output current of 0.5A and operates within an input voltage range of 3.641V to 6V, making it suitable for various applications requiring stable power supplies in compact designs. With a small outline package style and dual terminal position, this PMOS technology-based regulator ensures efficient performance in limited space environments.
NCP154MX180280TAG
NCP154MX180280TAG by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.27V and 0.39V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature range from -40°C to 85°C makes it ideal for various electronic devices.
LP3986TLX-2818/NOPB
LP3986TLX-2818/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.1 V, operating temperature range from -40 to 125 °C, and a max load regulation of 0.0417%. Ideal for applications requiring precise voltage regulation in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MIC5210-3.0YMM
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
MIC5331-G4YMT-TR
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
MIC5202-3.0YM
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 2 %;
MIC5208-4.0YMM-TR
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 4 %;
MIC5264-SPYML-TR
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 3 %;
MIC5320-SPYD6-TR
MIC5320-SPYD6-TR by Microchip Technology is a fixed positive multiple output LDO regulator with a package size of 1.6mm x 2.9mm x 1mm. It has a max input voltage of 5.5V and can provide a max output current of 0.15A. This regulator is suitable for applications requiring stable power supply with low dropout voltage and small form factor.
MIC5322-PPYMT-TR
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
MIC5208-4.0YMM
MIC5380-SSYFT-TR
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VQCCN; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
MIC5210-3.3BMMT&R
MIC5210-3.3BMMT&R by Micrel is a Fixed Positive Multiple Output LDO Regulator with 2 outputs, each at 3.3V and max current of 0.15A. It operates in temp range -40 to 125°C, suitable for applications requiring stable voltage regulation in compact spaces. Package style: Small Outline, Thin Profile, Shrink Pitch.
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 4 %;
MIC5332-SSYMT-TR
MIC5330-SGYML-TR
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 3 %;
MIC5357-SGYMME
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Terminal Finish: MATTE TIN; Minimum Input Voltage: 2.6 V;
MIC5393-PPYMT
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 3 %; Maximum Output Voltage-2: 3.09 V;
MIC5393-PPYMX
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 3 %; Minimum Output Voltage-1: 2.91 V;
MIC5393-PPYMX-TR
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 3 %; Minimum Input Voltage: 4 V;
MIC5393-PPYMT-T5
MIC5393-PPYMX-T5
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved