Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MIC5235YM5-TR by Microchip is an adjustable positive single output LDO regulator with a max output voltage of 20V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications. With a small outline and low profile package style, it offers precise load regulation of 1%.
Median Price
$0.840
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Arrow
1+ parts
$0.734
100+ parts
$0.722
1k+ parts
$0.709
10k+ parts
-
Chip1Stop
$0.808
Newark
$0.918
$0.901
Adafruit Industries
$3.300
$3.135
Future Electronics
$0.590
Master Electronics
$0.873
$0.765
Verical
$1.027
RS (Exports)
$0.695
Maritex
$0.697
$0.361
$0.312
$0.282
TME
$0.870
$0.730
Nova Conductors
$1.060
Chip Stock
Electro Sonic
$0.653
$0.644
IBS Electronics
$0.920
$0.885
Vyrian
Netsource Technology, Inc.
Atlantic Semiconductor
Inventory MP
Cyclops Electronics Ltd
LIBRA Elektronik GmbH
Euro-Tech
ComSIT Distribution GmbH
Kronex Distribution GmbH
Sensible Micro Corp
Semi Source
PC Components Company LLC
Bristol Electronics
Elcom Components
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Semicontronic
$0.191
$0.186
$0.185
Vigor
$0.230
Ampacity Inc.
$0.520
Argo Parts USA
$0.814
Netroflash
$1.039
Continental Prestige Electronics
$1.100
$0.826
Aztec Data Supply Inc.
$7.683
Corohmni
$8.833
Advanced Electronics
$8.996
$8.546
GreenTree Electronics
RC Electronics
$0.940
$0.860
$0.830
Eastek
Lixinc
QUARKTWIN TECHNOLOGY LTD
Kepictronics
Montano Global Distributors
Benley Electronics
LOOK Integrated Logistics
Perfect Parts
LMD Electronica
Futuretech Components
S.R.D Solutions
iodParts Technologies Inc.
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
A-Z Elektronik GmbH
Speed Components Ltd (Excess)
Metaverse IC Inc.
ChipstoGo Electronic ltd
NIA Electronics
Ledger Components
Provides durability and protection for the internal components, ensuring a longer lifespan for the product.
Allows for stable output voltage even when there is a small difference between the input and output voltages.
Enables easy and efficient installation on PCBs, saving space and simplifying assembly.
Ensures reliable performance even in high-temperature environments, making it suitable for a wide range of applications.
Facilitates easy integration into existing circuit designs and layouts.
Provides secure and reliable solder connections for stable operation.
Allows for operation in low-temperature conditions without compromising performance.
Provides a stable minimum output voltage for consistent performance.
Offers enough terminals for easy connection to other components.
Reduces the overall size and weight of the product, making it suitable for compact electronic devices.
Allows for fine-tuning of the output voltage according to specific requirements.
Ensures stable output voltage even under varying load conditions, enhancing system reliability.
Enables precise and compact PCB layout for efficient circuit design.
Delivers a stable and regulated output voltage for consistent performance.
Provides a reliable and durable terminal finish for long-lasting connections.
Facilitates easy and secure installation on the PCB.
Supports a wide range of output voltage requirements for various applications.
Allows for compact and low-profile designs in electronic systems.
Contributes to the small form factor and space-saving characteristics of the product.
Ensures proper soldering during assembly for reliable connections.
Withstands high-temperature soldering processes without damage to the components.
Provides efficient power conversion with minimal voltage drop, ensuring high efficiency.
Contributes to the compact and space-efficient design of the product.
Adjustable Regulators - Positive Single Output LDO MIC5235YM5-TR attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from Microchip Technology
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
MIC5235YM5-TR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
350766-1
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
American Power Devices
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SPX1117M3-L/TR
Maxlinear
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Terminal Pitch: 2.3 mm;
LM2941T
LM2941T by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a max input voltage of 26V. It features a min dropout voltage of 0.5V, making it suitable for applications requiring stable voltage regulation in various electronic devices. With a compact package style and through-hole terminal form, this regulator is ideal for designs where space efficiency is crucial.
LT1086CM#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Terminal Pitch: 2.54 mm; Qualification Status: Not Qualified;
LT3080EQ#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Operating Temperature (TJ-Min): -40 Cel;
LT3042IMSE#PBF
Analog Devices
Analog Devices' LT3042IMSE#PBF is an adjustable positive single output LDO regulator with a max output voltage of 15V and dropout voltage of 0.3V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCP1117LPSTADT3G
NCP1117LPSTADT3G by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and dropout voltage of 1.4V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LT1965EMS8E#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Terminal Pitch: .65 mm; Package Equivalence Code: TSSOP8,.19;
MAX8556ETE+T
Maxim Integrated
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 16; Package Code: HVQCCN; Terminal Form: NO LEAD; Moisture Sensitivity Level (MSL): 1; JESD-30 Code: S-XQCC-N16;
ISL80102IRAJZ
Renesas Electronics
ISL80102IRAJZ by Renesas Electronics is an adjustable positive single output LDO regulator with a max output current of 2A and a dropout voltage of 0.125V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3086EFE#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 16; Package Code: HTSSOP; Terminal Form: GULL WING; Package Equivalence Code: TSSOP16,.25; Minimum Input-Output Voltage Differential: 1.15 V;
LT3014IDD#PBF
LT3014IDD#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 60V and max dropout voltage of 0.57V. This surface-mount device operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LTC1844ES5-SD#TRMPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; JESD-609 Code: e3; Maximum Output Voltage-1: 6 V;
LT3045EDD#PBF
LT3045EDD#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADM7151ARDZ-04-R7
ADM7151ARDZ-04-R7 by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 5.1V and max current of 0.8A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM1117IDTX-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Terminal Finish: Matte Tin (Sn); Maximum Dropout Voltage-1: 1.4 V;
LT1963AET#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.98 %;
MIC29302WU
Microchip Technology
MIC29302WU by Microchip is an adjustable positive single output LDO regulator with a max output voltage of 25V and a max output current of 3A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, and it features a low dropout voltage of 0.37V for efficient power management.
TPS7A7200RGWT
TPS7A7200RGWT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 2A and a min input voltage of 1.43V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in electronics requiring stable voltage regulation. The package style is chip carrier with very thin profile, ideal for space-constrained designs.
LM2941SX
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Output Voltage-1: 20 V; Package Equivalence Code: SMSIP5H,.6,67TB;
LT3010EMS8E#TR
LT3010EMS8E#TR by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 60V and a max output current of 0.2A. It features a small outline package style suitable for surface mount applications, making it ideal for use in various electronic devices requiring precise voltage regulation in tight spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MIC5205YM5-TR
MIC5205YM5-TR by Microchip is an adjustable positive single output LDO regulator with a max dropout voltage of 0.35V and load regulation of 0.5%. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
MIC5205YM5T&R
Micrel
MIC5205YM5T&R by Micrel is an adjustable positive single output LDO regulator with a max output voltage of 16V and max load regulation of 0.5%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
MIC5236YMM-TR
MIC5236YMM-TR by Microchip is an adjustable positive single output LDO regulator with a max output voltage of 20V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications. With a compact square package style and gull wing terminal form, it is ideal for surface mount designs requiring precise voltage regulation.
MIC5233-YM5-TR
MIC5233-YM5-TR by Microchip is an adjustable positive single output LDO regulator with a max output voltage of 20V and a max load regulation of 1%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
MIC5233YM5-TR
MIC5233YM5-TR by Micrel is an adjustable positive single output LDO regulator with a max output voltage of 20V and a min dropout voltage of 0.45V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
MIC5236YMM
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; JESD-609 Code: e3; Surface Mount: YES;
MIC5236YMM by Microchip Technology is an adjustable positive single output LDO regulator with a max dropout voltage of 0.5V. It has a small outline, thin profile package style and can operate in temperatures ranging from -40°C to 125°C. This regulator is commonly used in applications requiring precise voltage regulation.
MIC5205YM5
MIC5205YM5 by Microchip Technology is an adjustable positive single output LDO regulator with a max dropout voltage of 0.35V and a max output current of 0.15A. It is commonly used in applications requiring stable voltage regulation, such as power management in electronic devices.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Dropout Voltage-1: .35 V; Maximum Load Regulation (%): .5 %;
MIC5233-YM5-TRVAO
MIC5233-YM5-TRVAO by Microchip: Adjustable LDO Regulator with 0.45V dropout, 1.24V min output, and 20V max output. Ideal for automotive applications due to AEC-Q100 screening and operating range of -40°C to 125°C. Package: Small outline, low profile, shrink pitch with gull wing terminals.
MIC5239YMM
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -40 Cel; Maximum Output Voltage-1: 20 V;
MIC5239YMM by Microchip Technology is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.4V. It is suitable for applications requiring precise voltage regulation in compact spaces, thanks to its small outline package style and dual terminal position.
MIC5239YMM-TR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Surface Mount: YES;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -40 Cel; Maximum Time At Peak Reflow Temperature (s): 40;
MIC5235YM5-TR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Width: 1.6 mm; Packing Method: TR;
MIC5207YM5-TR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Width: 1.6 mm; Terminal Pitch: .95 mm;
MIC5207YM5-TR by Microchip is an adjustable positive single output LDO regulator with a max output voltage of 15V and load regulation of 0.7%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
MIC5209YM
MIC5209YM by Microchip Tech is an adjustable positive single output LDO regulator with a max output current of 0.5A and dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Output Current-1: .5 A; Moisture Sensitivity Level (MSL): 1;
MIC5235YM5
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G5; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved