Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP795W20-I/SL by Microchip Tech: 8-bit RAM, SPI access, 5.5V max supply. Ideal for industrial timers & real-time clocks with interrupt capability and 1/100s min time. Small outline package, CMOS tech, -40 to 85°C temp range.
Median Price
$1.850
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Microchip Technology
1+ parts
100+ parts
$1.620
1k+ parts
$1.520
10k+ parts
$1.480
DigiKey
-
Mouser Electronics
NAC Semi
$2.060
$1.860
$1.680
Vyrian
IBS Electronics
$2.054
$2.002
$1.937
Nova Conductors
Contempo Components LLC
Semicontronic
$1.390
$1.355
$1.348
Ampacity Inc.
Vigor
$1.600
Corohmni
$1.784
Aztec Data Supply Inc.
$80.400
A-Z Elektronik GmbH
XL Components Corporation
Marpe Global Electronics
Authorized Procurement Solutions
Lixinc
Argo Parts USA
QualityLine Systems
Infinite Electronics LLP (Excess)
Bastille Electronics
Continental Prestige Electronics
Provides durability and protection for the internal circuitry ensuring a longer lifespan for the product.
Allows for easy and efficient communication with other devices, making integration into existing systems convenient.
Enables easy installation on PCBs, saving space and making the product suitable for compact designs.
Can operate at higher voltage levels, offering flexibility in power supply options.
Sufficient RAM width for storing data and running tasks efficiently.
Ensures high quality and reliability of the product, meeting industry standards.
Facilitates easy and secure placement on the PCB, optimizing space utilization.
The product can generate interrupts, allowing for timely response to specific events or tasks.
Can operate effectively in high-temperature environments, suitable for industrial applications.
Capable of functioning in low-temperature conditions, making it versatile for various settings.
CMOS technology ensures low power consumption and reliable performance in the product.
Operates efficiently at the standard voltage level, ensuring compatibility with most power sources.
Timers & Real-Time Clocks MCP795W20-I/SL attributes and parameters. Explore more Timers & Real-Time Clocks devices from Microchip Technology
Additional Features:
Maximum Clock Frequency:
External Data Bus Width:
Information Access Method:
Interrupt Capability:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Bits:
No. of Terminals:
No. of Timers:
On Chip Data RAM Width:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
RAM Words:
Screening Level:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Minimum Time:
Volatile:
Width:
Peripheral IC Type:
MCP795W20-I/SL Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Data Sheet Update 22/Jun/2016 Copper Bond Wire 5/Nov/2015
PCN Assembly/Origin - Mult Devices 23/May/2017
PCN Packaging - Label and Packing Changes 23/Sep/2015 Packing Changes 10/Oct/2016
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
Hitachi
Infineon Technologies
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Silicon Standard
DS1392U-33
Maxim Integrated
DS1392U-33 by Maxim Integrated is a 10-terminal timer/real-time clock IC with 3.3V supply, I2C access, and interrupt capability. It operates in industrial temperatures (-40 to 85°C) and has a max clock frequency of 0.032 MHz. Ideal for applications requiring precise timekeeping in compact designs.
ISL12057IUZ
Intersil
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
ISL12057IBZ-T
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS3231S+
DS3231S+ by Maxim Integrated is a CMOS timer and real-time clock with I2C access method. It operates at a voltage range of 2.3V to 5.5V and has a small outline package style. It is commonly used in applications requiring precise timekeeping, such as industrial automation and consumer electronics.
DS1307+
Analog Devices
DS1307+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates b/w 0-70°C, with supply voltage of 4.5-5.5V. Suitable for applications requiring precise timekeeping in commercial-grade environments.
DS1556-70IND
DS1556-70IND by Maxim Integrated is a CMOS TIMER & REAL TIME CLOCK with 32 terminals, operating at -40 to 85 °C. It has a clock frequency of 0.032 MHz, parallel access method, and direct address capability. Ideal for industrial applications requiring precise timekeeping and interrupt functionality.
DS1746-70IND
DS1746-70IND by Maxim Integrated is a CMOS TIMER & REAL TIME CLOCK with 32 terminals, 5V supply, and 0.032 MHz clock frequency. It operates in industrial temperature range (-40 to 85 °C) and uses PARALLEL, DIRECT ADDRESS access method for applications requiring precise timekeeping.
DS1340C-33#T&R
DS1340C-33#T&R by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates at 3.3V, has 16 terminals, and can withstand industrial temperatures. Ideal for applications requiring precise timekeeping in compact designs.
M48T35AV-10MH1F
M48T35AV-10MH1F by STMicroelectronics is a CMOS TIMER & REAL TIME CLOCK with 28 terminals, operating at 3.3V. It has a clock frequency of 0.032 MHz and can withstand temperatures from 0 to 70°C. This device is ideal for applications requiring parallel access and direct addressing in surface mount packages.
DS1678S
Dallas Semiconductor
DS1390U-18
DS1390U-18 by Maxim Integrated is a CMOS timer/real-time clock with 10 terminals. It operates b/w -40 to 85 °C, with a supply voltage range of 1.71V to 1.89V. This IC is ideal for industrial applications requiring interrupt capability and serial access via a 3-wire method.
RV-4162-C7-32.768KHZ-20PPM-TA-QA
Micro Crystal Ag
TIMER, REAL TIME CLOCK; Terminal Finish: GOLD; Peak Reflow Temperature (C): 260; JESD-609 Code: e4; Maximum Time At Peak Reflow Temperature (s): 40;
DS12C887A
DS12C887A by Maxim Integrated is a CMOS timer and real-time clock with parallel and muxed bus access methods. It operates at a max supply voltage of 5.5V and has a temperature range of 0 to 70°C. This IC is commonly used in applications requiring precise timekeeping and scheduling functions.
ISL12026IVZ-T
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
IP82C54Z
Renesas Electronics
Renesas Electronics' IP82C54Z is a 16-bit timer IC with 3 timers, operating at up to 8MHz. It has a supply voltage range of 4.5V to 5.5V and can withstand temperatures from -40°C to 85°C. Ideal for industrial applications requiring precise timing control in parallel access systems.
DS1306EN+T&R
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
DS1343E-3+
DS1343E-3+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with SERIAL, 3-WIRE access. It operates at 2.7V to 5.5V, has interrupt capability, and supports up to 4MHz clock frequency. Ideal for industrial applications requiring precise timekeeping in compact spaces due to its small outline package style.
DS1307Z+T&R
DS1307Z+T&R by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C access method. It operates b/w 0-70°C, has 8 terminals, and supports voltages from 4.5V to 5.5V. Ideal for applications requiring accurate timekeeping in commercial-grade devices.
M48T58Y-70PC1
M48T58Y-70PC1 by STMicroelectronics is a CMOS timer & real-time clock with 8-bit RAM. It operates b/w 0-70°C, with supply voltage range of 4.5-5.5V and clock frequency up to 0.032 MHz. Ideal for applications requiring parallel access method and direct address, it comes in a rectangular package with 28 terminals.
IS82C54Z
IS82C54Z by Renesas Electronics is a 16-bit timer IC with 3 timers, operating at a max frequency of 8 MHz. It features parallel access and direct addressing, suitable for industrial applications. With a supply voltage range of 4.5V to 5.5V, it comes in a square chip carrier package style ideal for surface mount assembly.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP79410-I/SN
MCP79410-I/SN by Microchip Tech: I2C access, 5.5V max supply, 85°C max temp. Ideal for industrial timers & real-time clocks with 64 RAM words and interrupt capability. Small outline package, suitable for surface mount applications.
MCP7940N-I/SN
MCP7940N-I/SN by Microchip Technology is a CMOS TIMER & REAL TIME CLOCK with I2C access. It operates at 1.8-5.5V, has 64 RAM words, and interrupts capability. Suitable for industrial applications, it has a small outline package style and operates b/w -40 to 85°C temperature range.
MCP79510-I/MS
MCP79510-I/MS by Microchip Tech is a TIMER & REAL TIME CLOCK IC with SERIAL(SPI) access, 3.6V max supply voltage, and 1/100s min time capability. Ideal for industrial applications requiring precise timing in a compact package with 10 terminals and interrupt capability.
MCP79410-I/MS
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: SQUARE;
MCP79410-I/SNVAO
MCP79410-I/SNVAO by Microchip Tech is a Real-Time Clock with I2C access, 64 RAM words, and interrupt capability. It operates b/w -40 to 85°C, ideal for automotive applications requiring precise timekeeping in a compact package. With a supply voltage range of 1.8-5.5V and small outline design, it's suitable for various electronic devices.
MCP7940NT-I/SN
MCP7940NT-I/SN by Microchip Technology is a CMOS RTC with I2C interface, 64-word RAM, interrupt capability, and 1.8-5.5V supply range. Ideal for industrial applications requiring real-time clock functions in a compact SMD package with AEC-Q100 screening level.
MCP7940N-I/ST
MCP7940N-I/MS
MCP7940N-I/MS by Microchip Technology is a CMOS RTC with I2C interface, 64 RAM words, and interrupt capability. It operates b/w -40 to 85°C, with supply voltage range of 1.8-5.5V. Ideal for industrial applications requiring real-time clock functionality in a compact form factor.
MCP79410T-I/SN
MCP79410T-I/SN by Microchip Tech: I2C access, 5.5V max supply, 85°C temp; for timers & real-time clocks in industrial settings. Features 8-bit RAM, interrupt capability, and operates at 0.032 MHz clock frequency. Small outline package with matte tin finish and dual position terminals.
MCP7940NT-I/MNY
MCP7940NT-I/MNY by Microchip Tech is a Real-Time Clock with I2C interface, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, has a supply voltage range of 1.8-5.5V, and features a small outline package suitable for industrial applications.
MCP7940N-I/P
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MCP79510T-I/MS
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
MCP79412-I/SN
MCP79410T-I/MNY
MCP79410T-I/MNY by Microchip Tech is a CMOS RTC with I2C interface, 8 RAM words, and interrupt capability. It operates b/w -40 to 85 °C, with max supply voltage of 5.5 V. Ideal for industrial applications requiring accurate timekeeping in compact designs.
MCP7940M-I/SN
MCP79410-I/ST
MCP79410-I/ST by Microchip Tech is a CMOS RTC with I2C interface, 64 RAM words, and interrupt capability. It operates b/w -40 to 85°C, has 8 terminals in a small outline package, and requires 1.8-5.5V supply voltage. Ideal for industrial applications requiring accurate timekeeping and timer functions.
MCP79400-I/SN
MCP7940MT-I/SN
MCP7940MT-I/SN by Microchip Technology is a Real-Time Clock with I2C interface, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, with supply voltage range of 1.8-5.5V. Ideal for applications requiring precise timekeeping in industrial settings.
MCP7940NT-I/MS
MCP7940NT-E/MS
TIMER, REAL TIME CLOCK; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved