Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DS3231SN# by Analog Devices is a CMOS timer/real-time clock with I2C access, 16 terminals, interrupt capability, and operates b/w -40 to 85°C. It has a supply voltage range of 2.3-5.5V and is ideal for industrial applications requiring precise timekeeping in compact designs.
Median Price
$14.130
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$7.998
100+ parts
$7.598
1k+ parts
10k+ parts
-
Chip1Stop
$10.300
$7.480
$7.130
Farnell
$12.290
$7.210
$6.980
Verical
$13.943
$9.401
$9.032
Arrow
$14.317
$9.500
Analog Devices Inc
$14.430
$7.590
Mouser Electronics
$17.170
$11.660
$11.000
DigiKey
$17.490
$12.490
$11.220
Forefront Electronics and Design
$6.130
Digiode
Innovative Industries
$8.000
Nova Conductors
$8.823
TME
$10.800
$6.420
$5.140
Mobius Materials
$14.736
$11.820
Component Electronics Inc.
$15.380
$11.540
$10.000
Chip Stock
Vyrian
Anansix
Rebound Electronics
ACDS - Activité Composants Distribution Service
Sensible Micro Corp
Dan-Mar Components
Bristol Electronics
Semi Source
LWI Electronics Inc
Rotakorn
A&K Electronics
Martec Srl
First Choice Components Inc.
Extreme Components
North Shore Components
Ampacity Inc.
$6.450
Semicontronic
$6.289
$6.256
Corphita
$7.198
Modulus Dynamics
$7.765
Corohmni
Advanced Electronics
Netroflash
$8.382
$8.206
Continental Prestige Electronics
$9.480
$7.360
$6.860
Vigor
$10.090
Microchip USA
$33.680
$33.200
$32.960
$32.720
MARBEL Systems
$70.007
$67.207
Texas Native Microelectronics
$80.468
$77.249
$74.835
Kenton Components
$96.562
$84.974
GreenTree Electronics
QUARKTWIN TECHNOLOGY LTD
Qasali Group International
$208.573
$191.192
Lixinc
Perfect Parts
RC Electronics
$8.480
$7.740
$7.500
Authorized Procurement Solutions
Argo Parts USA
Futuretech Components
Robosynatics
$7.610
$7.454
Lucentia Tech
Glotronic Ltd.
Component Stockers USA
$7.390
A-Z Elektronik GmbH
Infinite Electronics LLP (Excess)
Cyclops Electronics Ltd (Excess)
Formix International (Excess)
Assy Fe
This material offers good durability while keeping the overall weight of the product low.
I2C communication protocol allows for easy integration with other devices and systems.
Surface mount design makes it easier for automated assembly processes, saving time and cost.
Can handle higher voltage inputs, making it versatile in various applications.
Operates on a common voltage, making it compatible with many power sources.
Sufficient number of terminals for connecting to external devices and components.
Can generate interrupts for timely responses to events or signals.
Can operate in extreme low temperature conditions without issues.
Can withstand high temperature environments, increasing its range of use.
Can handle clock signals at a reasonably high frequency for accurate time-keeping.
Suitable for use in industrial applications where robust performance is required.
Combines timer and real-time clock functions in a single device, offering versatility.
Timers & Real-Time Clocks DS3231SN# attributes and parameters. Explore more Timers & Real-Time Clocks devices from Analog Devices
Maximum Clock Frequency:
External Data Bus Width:
Information Access Method:
Interrupt Capability:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
No. of Timers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Minimum Time:
Maximum Time At Peak Reflow Temperature (s):
Volatile:
Width:
Peripheral IC Type:
DS3231SN# Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
RV-8803-C7-32.768KHZ-3PPM-TA-QC
Micro Crystal Ag
RV-8803-C7-32.768KHZ-3PPM-TA-QC by Micro Crystal Ag is a CMOS timer/real-time clock with I2C interface, operating from -40 to 85 °C. It has interrupt capability, gold terminal finish, and AEC-Q200 screening for automotive applications. The package is rectangular, small outline, with 8 terminals and a seated height of 0.8 mm.
DS1305E+T&R
Analog Devices
Analog Devices' DS1305E+T&R is a CMOS TIMER & REAL TIME CLOCK with SERIAL, 3-WIRE access method. It operates at 2-5.5V and has interrupt capability. Suitable for applications requiring precise timekeeping in commercial-grade environments.
MAX16997AAUA+
MAX16997AAUA+ by Analog Devices is a TIMER, PROGRAMMABLE IC with BICMOS technology. It operates in automotive grade temperature range (-40 to 125 °C) and supports supply voltage from 5V to 40V. This small outline package with dual terminals is ideal for automotive applications requiring precise timing functions.
RTC-72423A
Epson Toyocom
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
ISL12022MIBZ-TR5421
Renesas Electronics
ISL12022MIBZ-TR5421 by Renesas Electronics is a CMOS timer/real-time clock with I2C access, 3/5V power supplies, and interrupt capability. It operates in industrial temperature range (-40 to 85°C) and has a max clock frequency of 0.032 MHz. Ideal for applications requiring precise timekeeping in compact designs.
AM1805AQ
Fujitsu
Fujitsu's AM1805AQ is a TIMER & REAL TIME CLOCK IC with I2C SERIAL interface. It operates b/w -40 to 85 °C and supports supply voltage from 1.5V to 3.6V, making it ideal for industrial applications requiring precise timekeeping in compact spaces.
DS1678S
Maxim Integrated
DS1678S by Maxim Integrated is a CMOS Timer & Real-Time Clock with I2C access. It operates b/w -40 to 85°C, has interrupt capability, and supports a clock frequency of 0.032 MHz. Ideal for industrial applications requiring precise timekeeping in compact spaces.
MCP79401-I/SN
Microchip Technology
MCP79401-I/SN by Microchip Tech is a CMOS RTC with I2C interface. It operates at 1.8-5.5V, has 64 RAM words, and interrupts capability. Widely used in industrial applications for timekeeping due to its small form factor and low power consumption of 3mA.
MCP7940NT-I/MNY
MCP7940NT-I/MNY by Microchip Tech is a Real-Time Clock with I2C interface, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, has a supply voltage range of 1.8-5.5V, and features a small outline package suitable for industrial applications.
ISL1208IU8Z-TK
Intersil
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
DS1302+
TIMER, REAL TIME CLOCK; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS1687-3+
TIMER, REAL TIME CLOCK; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
Z84C3006PEG
IXYS Corporation
Z84C3006PEG by IXYS Corp is an 8-bit timer IC with a clock frequency of 6.17 MHz, operating b/w -40°C to 100°C. It has 28 terminals in a rectangular package suitable for applications requiring programmable timers and real-time clocks.
ISL12057IUZ
TIMER, REAL TIME CLOCK; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
M41T93RMY6F
STMicroelectronics
M41T93RMY6F by STMicroelectronics is an 8-bit timer/real-time clock IC with SPI interface, operating at a max frequency of 5 MHz. It has interrupt capability and operates in industrial temperature range (-40 to 85°C). Suitable for applications requiring precise timekeeping in various electronic devices.
DS1683S+
TIMER, PROGRAMMABLE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
PCF85363ATT1/AJ
NXP Semiconductors
NXP Semiconductors' PCF85363ATT1/AJ is a CMOS timer/real-time clock with I2C access, 10 terminals, and 3.3V nominal voltage. It operates in industrial temperature range (-40 to 85°C) and has a small outline package style suitable for surface mount applications. The device's compact design (3x3mm) makes it ideal for space-constrained electronic systems.
PCF8563TS/5
NXP Semiconductors' PCF8563TS/5 is an I2C RTC with 1.8-5.5V supply, -40 to 85°C temp range, and 0.032 MHz clock frequency. Ideal for industrial applications requiring a compact 8-terminal package with TIMER & REAL TIME CLOCK functionality in a small outline design.
ISL12057IBZ-T
ISL12057IBZ-T by Renesas Electronics is a CMOS timer/real-time clock IC with I2C access, operating b/w -40 to 85°C. It has a supply voltage range of 1.8-3.6V and a clock frequency of 0.032 MHz, making it suitable for industrial applications requiring precise timekeeping in compact designs. This small-outline package with dual terminals is surface-mountable and has a moisture sensitivity level of 2.
X1226S8IZ
X1226S8IZ by Renesas Electronics is a CMOS timer and real-time clock IC with I2C access method. It operates b/w -40 to 85 °C, with supply voltage range of 2.7-5.5 V. Suitable for industrial applications requiring interrupt capability and small outline package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
DS3234SN#
DS3234SN# by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with SERIAL, 4-WIRE/SPI access method. It operates at 3.3V with interrupt capability and industrial temperature grade. Suitable for applications requiring precise timekeeping in compact form factor.
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
DS3231SN+TR
DS3231SN+TR by Maxim Integrated is a CMOS Real-Time Clock with I2C interface, 16 terminals, interrupt capability, and operates b/w -40 to 85°C. It has a supply voltage range of 2.3V to 5.5V and is ideal for industrial applications requiring precise timekeeping in compact designs.
DS3231SN#T&R
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
DS3231SN/T&R
DS3231SN/T&R by Maxim Integrated is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates b/w -40 to 85 °C, suitable for industrial applications. The small outline package has 16 terminals and supports clock frequency up to 0.032 MHz.
Analog Devices' DS3231SN#T&R is a CMOS timer & real-time clock with I2C access, 16 terminals, interrupt capability, and operates b/w -40 to 85°C. It has a supply voltage range of 2.3-5.5V, small outline package style, and is suitable for industrial applications requiring precise timekeeping in compact designs.
DS3234SN#T&R
Analog Devices' DS3234SN#T&R is a CMOS timer/real-time clock IC with 8-bit resolution, operating at 3.3V. It features SPI interface, interrupt capability, and industrial temperature grade suitability. Widely used in applications requiring precise timekeeping and scheduling functions.
DS3231SN
DS3231SN by Maxim Integrated is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates b/w -40 to 85 °C, has 16 terminals, and supports clock frequency up to 0.032 MHz. Ideal for industrial applications requiring precise timekeeping in compact designs.
DS3231SN+
DS3231SN+ by Maxim Integrated is a CMOS timer/real-time clock with I2C access, interrupt capability, and 16 terminals. Operating temperature range from -40 to 85°C makes it suitable for industrial applications requiring precise timekeeping in compact spaces. Package dimensions of 10.3mm x 7.5mm x 2.65mm and low power consumption at 3.3V supply voltage enhance its versatility in various electronic designs.
DS3231SN#
DS3231MZ+TRL
DS3231MZ+TRL by Analog Devices is a CMOS timer and real-time clock with I2C access method. It operates at a supply voltage of 3.3V and has an industrial temperature grade range of -45 to 85°C. This surface mount device is commonly used in applications requiring precise timekeeping.
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS3231MZ+
DS3231MZ+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates b/w -40 to 85 °C, with supply voltage of 2.3-5.5 V. Suitable for industrial applications due to interrupt capability and small outline package style.
DS3231S#T&R
TIMER, REAL TIME CLOCK; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
DS3231S/T&R
DS3231S/T&R by Maxim Integrated is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates at 3.3V, has interrupt capability, and supports a clock frequency of 0.032 MHz. Ideal for applications requiring precise timekeeping in commercial temperature range.
DS3231S#T&R by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates b/w 0-70 °C, with supply voltage range of 2.3-5.5 V. Ideal for applications requiring precise timekeeping in compact designs.
DS3231S+TR
DS3231S+TR by Analog Devices is a CMOS RTC with I2C interface, 16 terminals, interrupt capability, and operates b/w 0-70°C. It has a supply voltage range of 2.3-5.5V and is ideal for applications requiring precise timekeeping in commercial-grade environments.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved