Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP79411-I/MS by Microchip: I2C access, 5.5V max supply, 85°C temp; for timers & real-time clocks in industrial applications. Features 64 RAM words, interrupt capability, and operates at 0.032 MHz clock frequency. Small outline package with dual terminals and matte tin finish.
Median Price
$1.180
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Farnell
1+ parts
$0.936
100+ parts
$0.842
1k+ parts
$0.827
10k+ parts
-
Chip1Stop
$1.080
$1.040
$0.931
DigiKey
$1.030
Microchip Technology
$0.970
$0.950
Mouser Electronics
Element14
$1.184
$1.117
Newark
$1.220
Distrelec
$1.503
Master Electronics
$1.025
$1.002
$0.992
Verical
$1.212
$1.177
Arrow
$1.133
Nova Conductors
NAC Semi
$1.310
$1.060
TME
$1.340
$1.090
IBS Electronics
$1.642
$1.474
$1.377
Vyrian
Ampacity Inc.
$0.800
Semicontronic
$0.780
$0.776
Vigor
$1.020
Component Stockers USA
$1.050
$0.990
$0.940
Corohmni
$1.160
Advanced Electronics
$1.195
$1.135
Continental Prestige Electronics
$1.196
Argo Parts USA
Microchip USA
$7.670
Aztec Data Supply Inc.
$39.860
Lixinc
Futuretech Components
RC Electronics
$1.150
$1.130
Perfect Parts
West Coast Incorporated
Netroflash
$1.159
Plastic/Epoxy material is lightweight and durable, making the product suitable for various applications.
I2C communication protocol allows for easy integration with other devices, enhancing the product's versatility.
Surface mount packaging saves space and makes the product easier to integrate into compact designs.
High maximum supply voltage provides flexibility in power supply options for the product.
8-bit data RAM width allows for efficient data storage and processing capabilities in the product.
Interrupt capability allows the product to respond promptly to external events, enhancing its real-time clock functionality.
Wide operating temperature range makes the product suitable for use in harsh environmental conditions.
CMOS technology offers low power consumption, extending the product's battery life and reliability.
Timers & Real-Time Clocks MCP79411-I/MS attributes and parameters. Explore more Timers & Real-Time Clocks devices from Microchip Technology
Additional Features:
Maximum Clock Frequency:
External Data Bus Width:
Information Access Method:
Interrupt Capability:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Terminals:
No. of Timers:
On Chip Data RAM Width:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
RAM Words:
Screening Level:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Minimum Time:
Volatile:
Width:
Peripheral IC Type:
MCP79411-I/MS Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Devices 28/Nov/2017
PCN Packaging - Label and Packing Changes 23/Sep/2015 Packing Changes 10/Oct/2016
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
CRG0805F10R
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
DS1744P-70IND+
Maxim Integrated
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: J INVERTED; No. of Terminals: 34; Package Shape: RECTANGULAR; Minimum Supply Voltage: 4.5 V;
DS1340Z-3+T&R
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
PT7C4372ALEX
Pericom Semiconductor
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
RTC-8564JE
Epson Toyocom
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 20; Package Code: SOJ; Package Shape: RECTANGULAR;
DS1340C-33#T&R
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
PCF8523TS/1,112
NXP Semiconductors' PCF8523TS/1,112 is a CMOS TIMER & REAL TIME CLOCK with I2C interface. Operating from -40 to 85 °C, it has interrupt capability and supports voltages from 1.2V to 5.5V. This surface-mount device in PLASTIC/EPOXY package is ideal for industrial applications requiring accurate timekeeping.
CS82C54-10Z
Intersil
TIMER, PROGRAMMABLE; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
ISL1208IB8Z-T7A
ISL1208IB8Z-T7A by Renesas Electronics is a CMOS timer & real-time clock with I2C access, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, has a supply voltage range of 2.7-5.5V, and a clock frequency of 0.032768 MHz. Ideal for industrial applications requiring precise timekeeping in compact designs.
DS1342U+T&R
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
MCP79410T-I/MS
MCP79410T-I/MS by Microchip Technology is a CMOS timer & real-time clock with I2C access. It operates at 1.8-5.5V, has 64 RAM words, and interrupts capability. Suitable for industrial applications, it features a small outline package with dual terminals and matte tin finish.
DS1307ZN/T&R
DS1307ZN/T&R by Maxim Integrated is a CMOS timer/real-time clock with I2C access, 5V supply, and 0.032 MHz clock frequency. It's used in industrial applications for timekeeping due to its -40 to 85°C operating range and small outline package.
DS1340C-33#
Analog Devices
DS1340C-33# by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates b/w -40 to 85 °C, with supply voltage range of 2.97V to 5.5V. Ideal for industrial applications requiring accurate timekeeping in compact designs.
DS1305E+
Analog Devices' DS1305E+ is a CMOS timer/real-time clock with 20 terminals, operating voltage of 2-5.5V, and max frequency of 0.032 MHz. It's used in applications requiring interrupt capability, serial access via 3-wire method, and temp range of 0-70°C.
X1226S8IZT1
DS1375T+T&R
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: SON; Package Shape: RECTANGULAR;
RX8111CE:A3
Seiko Epson
RX8111CE:A3 by Seiko Epson is a CMOS timer & real-time clock with I2C access, 64 RAM words, and interrupt capability. It operates b/w -40 to 85 °C, has a clock frequency of 0.032768 MHz, and requires a supply voltage of 1.25-5.5 V. Ideal for industrial applications requiring precise timekeeping in compact spaces.
1338-31DCGI
Renesas Electronics 1338-31DCGI is a CMOS TIMER & REAL TIME CLOCK with SERIAL(I2C) access, 8-bit RAM, and 0.032768 MHz clock frequency. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package suitable for surface mount applications.
DS1344E-18+
DS1344E-18+ by Maxim Integrated is a CMOS TIMER & REAL TIME CLOCK with SERIAL, 3-WIRE access. It operates at 1.71V to 5.5V, has interrupt capability, and supports up to 4MHz clock frequency. Ideal for industrial applications requiring precise timekeeping in a compact package.
DS12885S
DS12885S by Maxim Integrated is a CMOS TIMER & REAL TIME CLOCK with 24 terminals, PARALLEL/MUXED BUS access, and interrupt capability. It operates b/w 0-70°C, has a supply voltage range of 4.5-5.5V, and is ideal for applications requiring precise timekeeping in commercial-grade environments.
DS1678S
DS1678S by Maxim Integrated is a CMOS Timer & Real-Time Clock with I2C access. It operates b/w -40 to 85°C, has interrupt capability, and supports a clock frequency of 0.032 MHz. Ideal for industrial applications requiring precise timekeeping in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP79410-I/SN
MCP79410-I/SN by Microchip Tech: I2C access, 5.5V max supply, 85°C max temp. Ideal for industrial timers & real-time clocks with 64 RAM words and interrupt capability. Small outline package, suitable for surface mount applications.
MCP7940N-I/SN
MCP7940N-I/SN by Microchip Technology is a CMOS TIMER & REAL TIME CLOCK with I2C access. It operates at 1.8-5.5V, has 64 RAM words, and interrupts capability. Suitable for industrial applications, it has a small outline package style and operates b/w -40 to 85°C temperature range.
MCP79510-I/MS
MCP79510-I/MS by Microchip Tech is a TIMER & REAL TIME CLOCK IC with SERIAL(SPI) access, 3.6V max supply voltage, and 1/100s min time capability. Ideal for industrial applications requiring precise timing in a compact package with 10 terminals and interrupt capability.
MCP79410-I/MS
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: SQUARE;
MCP79410-I/SNVAO
MCP79410-I/SNVAO by Microchip Tech is a Real-Time Clock with I2C access, 64 RAM words, and interrupt capability. It operates b/w -40 to 85°C, ideal for automotive applications requiring precise timekeeping in a compact package. With a supply voltage range of 1.8-5.5V and small outline design, it's suitable for various electronic devices.
MCP7940NT-I/SN
MCP7940NT-I/SN by Microchip Technology is a CMOS RTC with I2C interface, 64-word RAM, interrupt capability, and 1.8-5.5V supply range. Ideal for industrial applications requiring real-time clock functions in a compact SMD package with AEC-Q100 screening level.
MCP7940N-I/ST
MCP7940N-I/MS
MCP7940N-I/MS by Microchip Technology is a CMOS RTC with I2C interface, 64 RAM words, and interrupt capability. It operates b/w -40 to 85°C, with supply voltage range of 1.8-5.5V. Ideal for industrial applications requiring real-time clock functionality in a compact form factor.
MCP79410T-I/SN
MCP79410T-I/SN by Microchip Tech: I2C access, 5.5V max supply, 85°C temp; for timers & real-time clocks in industrial settings. Features 8-bit RAM, interrupt capability, and operates at 0.032 MHz clock frequency. Small outline package with matte tin finish and dual position terminals.
MCP7940NT-I/MNY
MCP7940NT-I/MNY by Microchip Tech is a Real-Time Clock with I2C interface, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, has a supply voltage range of 1.8-5.5V, and features a small outline package suitable for industrial applications.
MCP7940N-I/P
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MCP79510T-I/MS
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
MCP79412-I/SN
MCP79410T-I/MNY
MCP79410T-I/MNY by Microchip Tech is a CMOS RTC with I2C interface, 8 RAM words, and interrupt capability. It operates b/w -40 to 85 °C, with max supply voltage of 5.5 V. Ideal for industrial applications requiring accurate timekeeping in compact designs.
MCP7940M-I/SN
MCP79410-I/ST
MCP79410-I/ST by Microchip Tech is a CMOS RTC with I2C interface, 64 RAM words, and interrupt capability. It operates b/w -40 to 85°C, has 8 terminals in a small outline package, and requires 1.8-5.5V supply voltage. Ideal for industrial applications requiring accurate timekeeping and timer functions.
MCP79400-I/SN
MCP7940MT-I/SN
MCP7940MT-I/SN by Microchip Technology is a Real-Time Clock with I2C interface, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, with supply voltage range of 1.8-5.5V. Ideal for applications requiring precise timekeeping in industrial settings.
MCP7940NT-I/MS
MCP7940NT-E/MS
TIMER, REAL TIME CLOCK; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved