Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 22; Package Code: SON; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Bristol Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
ComSIT Distribution GmbH
Nova Conductors
AZTECH Wire
$10.629
Aztec Data Supply Inc.
$45.140
Corohmni
$60.945
Bastille Electronics
Argo Parts USA
Continental Prestige Electronics
ChipTracer
Timers & Real-Time Clocks RX-8581NB attributes and parameters. Explore more Timers & Real-Time Clocks devices from Epson Toyocom
Maximum Clock Frequency:
Information Access Method:
JESD-30 Code:
JESD-609 Code:
No. of Terminals:
No. of Timers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Peripheral IC Type:
RX-8581NB Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1552200168
Molex
WIRE AND CABLE;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Bkc Semiconductors
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS1744P-70
Dallas Semiconductor
TIMER, REAL TIME CLOCK; Temperature Grade: COMMERCIAL; Terminal Form: J INVERTED; No. of Terminals: 34; Package Shape: RECTANGULAR; Minimum Time: SECONDS;
IS82C54-10
Intersil
TIMER, PROGRAMMABLE; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
ISL12057IUZ-T
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
DS1302SN-16
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
STWD100PYW83F
STMicroelectronics
STWD100PYW83F by STMicroelectronics is a small outline timer with 5 terminals, operating at -40 to 125°C. It has a supply voltage range of 2.7V to 5.5V and is suitable for automotive applications due to its CMOS technology. The package style is thin profile with matte tin finish, making it ideal for surface mount designs in compact spaces.
ISL12008IB8Z-T
Renesas Electronics
ISL12008IB8Z-T by Renesas Electronics is a CMOS TIMER & REAL TIME CLOCK with SERIAL(I2C) access. It operates b/w -40 to 85 °C, with supply voltage range of 2.7V to 5.5V. This small outline package has 8 terminals and interrupt capability, making it ideal for applications requiring accurate timekeeping in compact designs.
PCF8523TK/1
NXP Semiconductors
PCF8523TK/1 by NXP Semiconductors is a CMOS timer and real-time clock IC with I2C access. It operates b/w -40 to 85°C, suitable for industrial applications. This small outline package has 8 terminals, measures 4x4mm, and supports supply voltages from 1.2V to 5.5V for precise timekeeping in various electronic devices.
DS1375T/T&R
Maxim Integrated
DS1375T/T&R by Maxim Integrated is an I2C RTC with 1.7-5.5V supply, -40 to 85°C temp range, and 0.032 MHz clock frequency. It's a TIMER & RTC IC suitable for industrial applications requiring precise timekeeping in compact SMD form factor.
M41T93RMY6F
M41T93RMY6F by STMicroelectronics is an 8-bit timer/real-time clock IC with SPI interface, operating at a max frequency of 5 MHz. It has interrupt capability and operates in industrial temperature range (-40 to 85°C). Suitable for applications requiring precise timekeeping in various electronic devices.
CP82C54-10Z
TIMER, PROGRAMMABLE; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
BQ4802LYPWR
BQ4802LYPWR by Texas Instruments is a Timer & Real-Time Clock IC with 28 terminals and CMOS technology. It operates at 3/3.3V, has interrupt capability, and supports parallel access method. Ideal for applications requiring accurate timekeeping in commercial-grade devices.
DS1307+
Analog Devices
DS1307+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates b/w 0-70°C, with supply voltage of 4.5-5.5V. Suitable for applications requiring precise timekeeping in commercial-grade environments.
AB0815-T3
Abracon
AB0815-T3 by Abracon is a 16-terminal timer/real-time clock IC with I2C access, suitable for industrial applications. It operates b/w -40 to 85°C, with supply voltage range of 1.5-3.6V and max clock frequency of 0.032 MHz. This surface-mountable chip carrier has a very thin profile and terminal pitch of 0.5mm.
PCF2127AT/2
PCF2127AT/2 by NXP Semiconductors is a CMOS timer & real-time clock with I2C access, operating at -40 to 85°C. It has 20 terminals, small outline package style, and supports supply voltage range of 1.8-4.2V. Ideal for industrial applications requiring precise timekeeping in compact designs.
DS1302N+
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1338-31DCGI8
Integrated Device Technology
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
RTC-72423:A3:ROHS
Toyocom U S A
Toyocom U S A's RTC-72423:A3:ROHS is a CMOS Real-Time Clock with 24 terminals, operating b/w -40 to 85°C. It has a supply voltage range of 4.5V to 5.5V and uses parallel access method for data retrieval. Ideal for industrial applications requiring precise timekeeping in compact spaces.
PT7C4337WEX
Pericom Semiconductor
DS1337S+T&R
DS1337S+T&R by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C access, 1.8-5.5V supply, -40 to 85°C temp range. It has 8 terminals, interrupt capability, and is surface mountable for industrial applications.
M48T02-150PC1
STMicroelectronics M48T02-150PC1 is a CMOS TIMER & REAL TIME CLOCK with 2040 RAM words, 8-bit data RAM width, and 0.032 MHz clock frequency. It operates b/w 0 to 70 °C and uses parallel, direct address access method. Ideal for applications requiring precise timekeeping in commercial-grade environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RX-8581SA:B3:ROHS
Timers or RTCs;
RX-8581NB:B3:PURESN
Seiko Epson
RX-8581NB:B3
RX-8581NBB-3
Epson Toyocom
RX-8564LC:B3:PURESN
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 12; Package Code: SOJ; Package Shape: RECTANGULAR;
RX-8581NB:B0
RX-8581NBB-0
RX-8581NBB-0 by Epson Toyocom is a CMOS timer & real-time clock with I2C access, suitable for industrial applications. It operates b/w -40 to 85°C, with supply voltage ranging from 1.8V to 5.5V. This small outline package has 22 terminals and measures 4.8mm in width, making it ideal for surface mount designs.
RX-8581SA:B0
RX-8581SA:B0 by Seiko Epson is a CMOS timer & real-time clock with I2C access, suitable for industrial applications. It operates b/w -40 to 85°C, with supply voltage ranging from 1.8V to 5.5V. This compact device features 14 terminals in a small outline package style, making it ideal for space-constrained designs.
RX-8581SAB-0
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
RX-8581NB
Toyo Communication Equipment
RX-8581NB:B:PURESN
RX-8581NBB
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: SON; Package Shape: RECTANGULAR;
RX-8581NB:B
RX-8581SA:B3:PURESN
RX-8581SA:B3:PURESN by Seiko Epson is a small outline timer and real-time clock with I2C access method. It operates at a max supply voltage of 5.5V and has an industrial temperature grade range of -40 to 85°C. This device is commonly used in applications that require accurate timekeeping and scheduling functions.
RX-8581SA:B0:PURESN
RX-8581SA:B:PURESN
RX-8564LC:B0:PURESN
RX-8581SA-0
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved