Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ATF16V8C-7SU by Microchip Technology is a PLD with 7.5ns propagation delay, 18 inputs, and 64 product terms. It is used in applications requiring high-speed processing, such as industrial control systems and communication equipment. The device operates at a max clock frequency of 100MHz and has a compact rectangular package style for surface mount assembly.
Median Price
$2.970
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Microchip Technology
1+ parts
100+ parts
$2.450
1k+ parts
$2.280
10k+ parts
$2.150
Digiode
$2.822
-
NAC Semi
$3.060
$2.770
$2.540
VNN
Vyrian
Nova Conductors
Vigor
$2.130
Semicontronic
$2.520
$2.457
$2.444
Corphita
$2.673
Corohmni
$2.720
Ampacity Inc.
$5.490
Microchip USA
$17.982
Aztec Data Supply Inc.
$144.360
QUARKTWIN TECHNOLOGY LTD
RC Electronics
Lixinc
A-Z Elektronik GmbH
Glotronic Ltd.
Alle Elektronik GmbH
Continental Prestige Electronics
Argo Parts USA
West Coast Incorporated
Futuretech Components
Kepictronics
Supply Digital
Perfect Parts
Bastille Electronics
This material provides good durability and protection for the internal components of the PLD, ensuring a longer lifespan.
The fast propagation delay allows for quick signal processing, making this PLD suitable for high-speed applications.
With a higher maximum supply voltage, this PLD can handle a wider range of input voltages, increasing its versatility.
CMOS technology offers low power consumption and high noise immunity, making this PLD energy-efficient and reliable.
Having a high number of inputs allows for more complex logic operations to be performed, making this PLD ideal for advanced applications.
The high maximum clock frequency enables the PLD to operate at high speeds, making it suitable for demanding applications.
Programmable Logic Devices (PLD) ATF16V8C-7SU attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Microchip Technology
Programmable IC Type:
Organization:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Product Terms:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Architecture:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Packing Method:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
ATF16V8C-7SU Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 08/Aug/2014
PCN Assembly/Origin - Mult Dev Assembly 16/Jun/2020
PCN Packaging - MBB/Label Chgs 16/Nov/2018 Transfer to Microchip/Label/Pkg 5/Sep/2016
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
Secos
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
1554216004
Molex
WIRE AND CABLE;
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Db Lectro
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ATF1504ASVL-20JI44
Atmel
Atmel ATF1504ASVL-20JI44 is a 64 macrocell EE PLD with 20ns propagation delay, operating at max 3.6V. Ideal for industrial applications, it offers in-system programmability, JTAG boundary scan test, and 32 I/O lines for versatile functionality.
EPM570ZM256C6N
Altera
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: BGA; Package Shape: RECTANGULAR;
M4A5-64/32-10VNC48
Lattice Semiconductor
M4A5-64/32-10VNC48 by Lattice Semiconductor is a 64 macrocell EE PLD with 34 inputs and 32 I/O lines. It operates at a max clock frequency of 62.5 MHz, has a propagation delay of 10 ns, and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile I/O configurations in commercial-grade environments.
ATF750CL-15JU
ATF750CL-15JU by Microchip Technology is a 5.5V CMOS PLD with 15ns propagation delay, ideal for industrial applications. Featuring 10 macro cells and 11 dedicated inputs, it operates at temperatures ranging from -40 to 85°C. With a clock frequency of up to 44MHz, this PLD offers versatile programmable logic solutions in a compact chip carrier package.
XC2C32A-6QFG32I
Xilinx
Xilinx XC2C32A-6QFG32I is a 32 macrocell FLASH PLD with 6 ns propagation delay and 300 MHz max clock frequency. Ideal for industrial applications, it operates at -40 to 85 °C, has 21 I/O lines, and supports JTAG boundary scan testing.
EPM570M100C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: BGA; Package Shape: SQUARE;
5M570ZT100I5N
The Altera 5M570ZT100I5N is a programmable logic device with a propagation delay of 17.7 ns and a maximum clock frequency of 118.3 MHz. It has 440 macro cells and 74 I/O lines, making it suitable for applications that require fast data processing and I/O capabilities in industrial settings.
EPM7064SLC44-10N
The EPM7064SLC44-10N by Altera is a programmable logic device with 64 macro cells. It has a propagation delay of 10 ns and a maximum supply voltage of 5.25 V. This CMOS device is surface mountable and in-system programmable. Its application includes output function as macrocell and it can operate at a maximum clock frequency of 125 MHz.
EPM3032ATC44-4N
Intel
Intel's EPM3032ATC44-4N is a 32 macrocell EE PLD with 4.5 ns propagation delay, operating at up to 227.3 MHz clock frequency. Ideal for applications requiring in-system programmability and featuring 34 I/O lines, this CMOS technology PLD has a max supply voltage of 3.6 V and operates within -40 to +85°C temperature range.
EPM240ZM100C7N
The Intel EPM240ZM100C7N is a 192 macrocell FLASH PLD with 80 inputs/outputs, 12 ns propagation delay, and CMOS technology. Ideal for applications requiring in-system programmability, it features a grid array package style and JTAG boundary scan test capability.
5M160ZE64C4
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE;
XC95288XL-6TQG144C
The Xilinx XC95288XL-6TQG144C is a FLASH PLD with 288 macro cells, 117 inputs/outputs, and 208.3 MHz clock frequency. It operates at a max voltage of 3.6V and has a propagation delay of 6ns. Ideal for applications requiring high-speed processing in programmable logic devices.
EPM7128STC100-15C
The EPM7128STC100-15C by Altera is a programmable logic device with a maximum clock frequency of 76.9 MHz and a propagation delay of 15 ns. It has 80 I/O lines and can operate with either 3.3V or 5V. This PLD is commonly used in applications requiring configurable I/O operations.
EPM240T100I5
FLASH PLD; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE; Qualification: Not Qualified;
ATF1508AS-7AX100
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
EPM7032SLC44-7N
The Altera EPM7032SLC44-7N is a 32 macrocell EE PLD with 7.5 ns propagation delay, operating at up to 166.7 MHz clock frequency. It features in-system programmability and 36 I/O lines, suitable for applications requiring fast logic processing and versatile I/O capabilities in commercial-grade environments.
ATF22V10CZ-15PC
ATF22V10CZ-15PC by Microchip Technology is a 24-terminal PLD with 15 ns propagation delay and 5.25 V max supply voltage, using CMOS technology. It features 11 dedicated inputs, 10 I/O lines, and operates at up to 55.5 MHz clock frequency. Ideal for applications requiring FLASH PLD functionality in commercial temperature range.
EPM240F100C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: LBGA; Package Shape: SQUARE;
EP1K50QC208-1N
EP1K50QC208-1N by Intel is a programmable logic device (PLD) with 2880 logic cells and a propagation delay of 0.3 ns. It is used for various applications requiring high-speed processing, such as telecommunications and industrial automation.
ATF16V8CZ-15JU
ATF16V8CZ-15JU by Microchip Technology is a 5.5V PLD with 15ns propagation delay, suitable for industrial applications. Featuring 64 product terms and 8 I/O lines, it operates at up to 45MHz clock frequency in temperatures ranging from -40°C to 85°C. This flash PLD in square chip carrier package offers versatile programmable logic solutions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATF1504AS-10JU44
ATF1504AS-10JU44 by Microchip Technology is a programmable logic device (PLD) with 64 macro cells and 32 inputs/outputs. It has a max clock frequency of 125 MHz and can be used for in-system programming, making it suitable for industrial applications.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
ATF1508AS-10AU100
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
Microchip ATF1508AS-10AU100 is a 128 macrocell EE PLD with 80 I/O lines. It operates at 125 MHz clock frequency, has 10 ns propagation delay, and supports in-system programming. Ideal for industrial applications requiring fast processing and versatile I/O capabilities.
ATF1504AS-10AU44
Microchip Technology's ATF1504AS-10AU44 is a 5.5V PLD with 10ns propagation delay, 64 macro cells, and 32 inputs. Ideal for industrial applications, it offers in-system programmability, JTAG boundary scan test support, and operates at temperatures ranging from -40 to 85°C.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
ATF1508ASV-15AU100
Microchip's ATF1508ASV-15AU100 is a 128 macrocell EE PLD with 80 I/O lines. It operates at 3.3V, has a propagation delay of 15ns, and supports in-system programming. Ideal for industrial applications requiring high clock frequencies up to 100MHz.
ATF1504AS-10AU100
Microchip Technology's ATF1504AS-10AU100 is a 64 macro cell EE PLD with 64 inputs/outputs and 40 product terms. It operates at a max clock frequency of 125 MHz, with a propagation delay of 10 ns. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing.
ATF1504ASV-15AU44
ATF1508ASV-15AU100-T
Microchip Technology's ATF1508ASV-15AU100-T is a 3.3V EE PLD with 15ns propagation delay and 100 terminals. Ideal for industrial applications, it features a max clock frequency of 100MHz, 80 I/O lines, and operates b/w -40 to 85°C.
ATF1504ASVL-20AU44
Microchip Technology's ATF1504ASVL-20AU44 is a 3.3V EE PLD with 32 I/O lines and 20ns propagation delay. Ideal for industrial applications, it features a max clock frequency of 83.3MHz and operates b/w -40 to 85°C, making it suitable for various programmable logic tasks.
ATF1508ASL-25AU100
Microchip ATF1508ASL-25AU100 is a 128 macrocell EE PLD with 25ns propagation delay, in-system programmable, and supports JTAG boundary scan test. Ideal for industrial applications requiring high-speed processing up to 33.3MHz, with a wide operating temperature range from -40°C to 85°C. Package style is flatpack, thin profile, fine pitch for compact designs.
ATF1504AS-10AU44-T
Microchip Technology's ATF1504AS-10AU44-T is a 32 I/O EE PLD with 10 ns propagation delay and 125 MHz clock frequency. Ideal for industrial applications, this PLD features a max supply voltage of 5.5 V and operates in temperatures ranging from -40 to 85 °C.
ATF1504AS-10JU84
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
Microchip Technology's ATF1504AS-10JU84 is a 64 macrocell EE PLD with 32 inputs/outputs, 40 product terms, and 10ns propagation delay. Ideal for industrial applications, it operates b/w -40 to 85°C, supports JTAG boundary scan test, and has a max clock frequency of 125MHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved