Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
QIE Inc.
Semicontronic
$1.500
$1.462
$1.455
One Stop Electronics
$7.500
MARBEL Systems
$11.896
AZTECH Wire
$12.890
Texas Native Microelectronics
$13.673
$13.126
$12.716
$12.032
Kenton Components
$16.408
$14.439
Qasali Group International
$36.917
$34.333
$32.487
QUARKTWIN TECHNOLOGY LTD
Vigor
Corphita
Microchip USA
Multiplexers & Switches MAX305ESE attributes and parameters. Explore more Multiplexers & Switches devices from Maxim Integrated
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
MAX305ESE Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Maxim Integrated is a leading provider of analog and mixed-signal integrated circuits for a range of industries, including automotive, industrial, communications, consumer, and computing. Founded in 1983 with headquarters in San Jose, California, Maxim has grown to become one of the world’s largest producers of integrated circuits due to its innovative solutions that solve customers’ toughest design challenges. Maxim's broad portfolio includes products such as power management solutions, high-voltage solutions, motor driver solutions, amplifiers and comparators, data converters and interface ICs. For over 35 years, Maxim has continued to push the boundaries of analog integration by providing innovative integrated circuit products that offer the industry’s highest performance and best quality. The company’s commitment to delivering cutting-edge technology enables customers to stay current with changing demands in the market. From automotive check engine lights to fitness trackers worn on the wrist – Maxim enables customers across multiple industries to create groundbreaking products through their advanced IC designs. Maxim Integrated is now officially part of Analog Devices.
President & CEO
Tunc Doluca
Senior VP & CFO
Brian C. White
Senior VP, Technology & Manufacturing Group
Vivek Jain
Fabrication
Fab Initiation
Philippines
Cavite
Wafer Capacity
489,000
USA
Beaverton
312,000
Thailand
Chon Buri
194,000
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
Littelfuse
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
77052012C
Defense Logistics Agency
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
NC7SZ66P5X_NL
Fairchild Semiconductor
Fairchild Semiconductor's NC7SZ66P5X_NL is a CMOS SPST switch with 30 ohm Ron, 7 ns switch-on time, and 9 ns switch-off time. It operates b/w -40 to 85 °C and has a supply voltage range of 1.65V to 5.5V. Ideal for industrial applications requiring fast switching in compact designs.
DG409DY
Harris Semiconductor
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAST4599DTT1G
Onsemi
NLAST4599DTT1G by Onsemi is a SPDT switch with 6 terminals, operating from -55 to 125 °C. It has a max on-state resistance of 55 ohm and offers 93 dB isolation. Ideal for military-grade applications requiring fast switching times and low on-state resistance.
CD4051BM96G4
CD4051BM96G4 by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 20 V. With a nominal bandwidth of 20 kHz, it is ideal for military-grade applications requiring high-speed signal switching in compact spaces.
MAX4714EXT+T
Analog Devices
Analog Devices' MAX4714EXT+T is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a max on-state resistance of 2.5 ohm and offers 54 dB isolation. Ideal for industrial applications requiring fast switching times and low power consumption.
74HC4051D-T
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4067BQ,118
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX4545EAP
Maxim Integrated
MAX4545EAP by Maxim Integrated is a 4-function audio/video switch with 20 terminals. It operates at -40 to 85°C, with a supply voltage range of 2.7-6V and negative supply voltage of -2.7 to -6V. Featuring CMOS technology, it offers low on-state resistance (20 ohm) and fast switching times (150ns on, 100ns off), making it ideal for industrial applications requiring high isolation (80dB).
HEF4051BT,653
NXP Semiconductors
HEF4051BT,653 by NXP Semiconductors is an 8-channel CMOS multiplexer with a max on-state resistance of 175 ohm and switching type of BREAK-BEFORE-MAKE. It operates at a nominal voltage range of 3V to 15V, making it suitable for industrial temperature grade applications requiring low power consumption and high isolation levels.
FSA5157P6X
FSA5157P6X by Onsemi is a SPDT switch with 1.65-4.3V supply, 0.8 ohm Ron, and 75dB isolation. Ideal for industrial applications, it offers fast switching times of 65ns on and 40ns off in a compact package with dual terminals and separate outputs.
MAX4565EWP+
MAX4565EWP+ by Analog Devices is a 4-function audio/video switch with 60 ohm Ron, 150 ns switch-on time, and 100 ns switch-off time. It operates b/w -40 to 85 °C and has a terminal pitch of 1.27 mm. Ideal for industrial applications requiring high isolation and low resistance match.
CD4066BCN
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
74HC4051PW,118
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSUSB30MUX
DPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
MAX4544EUT+T
MAX4544EUT+T by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 60 ohm and provides 76 dB off-state isolation. Ideal for industrial applications requiring fast switching times and high reliability in a compact package.
CD4051BPWRE4
CD4051BPWRE4 by Texas Instruments is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 3-20V and offers a max on-state resistance of 1050 ohm. With a compact small outline package, it is ideal for military-grade applications requiring precise signal switching in harsh environments.
TS3USB30EDGSR
TS3USB30EDGSR by Texas Instruments is a 10-terminal, 2-channel differential multiplexer with a nominal voltage of 3.3V. It features a max operating temperature of 85°C and offers separate outputs with a max on-state resistance of 10 ohm. Ideal for industrial applications requiring high-speed switching and low power consumption in compact designs.
PCA9548ADWR
PCA9548ADWR by Texas Instruments is a multiplexer with 2 functions. It has a small outline package style and operates at temperatures ranging from -40 to 85 °C. It is commonly used for single-ended multiplexing applications.
CD4053BE
CD4053BE by Texas Instruments is a 3-channel CMOS multiplexer with 16 terminals. It operates at a supply voltage range of 3-20V and offers a max on-state resistance of 1050 ohm. Ideal for military-grade applications, it has a bandwidth of 30 kHz and features break-before-make switching for seamless performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAX313FESE+
MAX313FESE+ by Analog Devices is a 4-function multiplexer with a supply voltage range of 12/+15V. It features a small outline package, industrial temperature grade, and CMOS technology. With separate outputs and break-before-make switching, it's ideal for applications requiring high-speed signal routing in industrial settings.
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX313FESE
MAX313FESE by Maxim Integrated is a 4-function multiplexer with 16 terminals, operating at -40 to 85°C. It features a max on-state resistance of 10 ohm, switching time of 225 ns, and industrial temperature grade. Ideal for applications requiring high-speed signal routing in compact designs.
MAX355CWE+
DIFFERENTIAL MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX355CWE+ by Analog Devices is a CMOS differential multiplexer with 4 channels. It operates at a supply voltage range of ±15V and has a max on-state resistance of 350 ohm. With a small outline package style, it is ideal for commercial temperature grade applications requiring precise signal switching within a wide temperature range.
MAX355CWE
MAX355CWE by Maxim Integrated is a CMOS differential multiplexer with 4 channels. It operates at +-15V supplies, has 16 terminals, and a max on-state resistance of 350 ohm. Ideal for applications requiring small outline packages and break-before-make switching with commercial temperature grade.
MAX313FESE+T
MAX313FESE-T
MAX313FESE-T by Maxim Integrated is a 4-function SPST multiplexer with 16 terminals. It operates b/w -40 to 85°C, with a max seated height of 1.75mm and width of 3.9mm. Ideal for industrial applications requiring CMOS technology, it offers separate outputs, low on-state resistance (10 ohm), and fast switching times (225ns on, 185ns off).
MAX313FEPE+
SPST; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
MAX313FEPE
MAX313FEPE by Maxim Integrated is a 4-function multiplexer with 16 terminals, operating at -40 to 85°C. It features a max on-state resistance of 10 ohm and switching voltage of 12/+-15 V. Ideal for industrial applications requiring high isolation and fast switch-on/off times in a compact IN-LINE package.
SPST; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
MAX333ACPP
MAX333ACPP by Maxim Integrated is a 4-function multiplexer with 20 terminals, operating at -40 to +85°C. It features a nominal voltage of ±15V, on-state resistance of 45Ω, and break-before-make switching. Ideal for applications requiring high-speed signal routing in industrial settings.
MAX333ACPP+
SPDT; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MAX399ESE+
MAX399ESE+ by Analog Devices is a CMOS differential multiplexer with 4 channels. It operates at industrial temperature grade, with on-state resistance of 100 ohm and off-state isolation of 75 dB. Ideal for applications requiring fast switching times and precise signal routing in compact designs.
MAX399ESE
MAX399ESE by Maxim Integrated is a CMOS differential multiplexer with 4 channels, 2 functions, and a max on-state resistance of 100 ohm. It operates in industrial temperature grades from -40 to 85 °C and has a small outline package suitable for surface mount applications. With a nominal voltage of +-5 V, it offers reliable signal switching with break-before-make functionality.
MAX339CSE+
MAX339CSE
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved