Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Lumex SML-LX1610UPGC/A is a single color LED with a peak wavelength of 525nm and max forward current of 0.35A. With a viewing angle of 110°, it's ideal for surface mount applications in electronics, offering clear green light output at an operating temperature range from -20 to 70°C.
Median Price
$6.679
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Aztec Data Supply Inc.
$0.072
Corohmni
$0.190
AZTECH Wire
$5.182
Aranea Global
$6.545
$6.283
Continental Prestige Electronics
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
Single configuration makes it easy to use and integrate into various electronic circuits.
With a high maximum forward current, this LED can handle high power levels without failure.
Peak wavelength of 525 nm ensures a bright green light output.
Clear lens allows for maximum light transmission and brightness.
This single color LED is ideal for applications that require a consistent green light output.
High maximum operating temperature makes this LED suitable for a wide range of environments.
Compact height makes it suitable for applications where space is limited.
Round shape provides a wide viewing angle for the emitted light.
Low minimum operating temperature ensures reliable performance in cold conditions.
Terminal finish of TIN ensures good electrical conductivity and solderability.
Green color light output is suitable for various applications such as displays and indicators.
Bulk packing method is cost-effective for large quantity orders.
Terminal pitch of 5.08 mm makes it easy to mount and solder onto PCBs.
Wide viewing angle of 110° ensures good visibility from different viewing positions.
Nominal luminous intensity of 3.5 mcd provides a bright and visible light output.
Surface mount feature allows for easy and secure mounting on PCBs.
Visible LEDs SML-LX1610UPGC/A attributes and parameters. Explore more Visible LEDs devices from Lumex
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
SML-LX1610UPGC/A Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
For over 40 years, Lumex, a member of the ITW Group, has been a global leader in the optoelectronics industry. With the broadest range of high efficiency, high performance LEDs and LCDs in the industry, Lumex provides thousands of standard products and specializes in semi-custom and custom designs. Lumex's optical range encompasses a wide spectrum including UV, visible and infrared wavelengths. Lumex's Technical Design Specialists are experts in collaboratively developing effective, smart solutions to design dilemmas. Lumex is unique in the market due to the unprecedented level of complimentary technical support provided to large and small customers alike. Lumex works closely with clients to identify the best standard or customized technology for each specific application need.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
HSMS-C191
Broadcom
HSMS-C191 by Broadcom is a 1mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.02A and operates b/w -40 to 85°C. Ideal for applications requiring high efficiency red or orange light emission, such as in surface mount configurations.
CMD15-21VGD/TR8
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.5; Lens Type: DIFFUSED; Height: 1.1 mm;
HSME-C170
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
150141YS73100
Wuerth Elektronik & Kg
150141YS73100 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 592nm, forward current of 0.03A, and luminous intensity of 300.0mcd. Ideal for applications requiring a single color LED with surface mounting feature and 120° viewing angle.
APT1608EC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Lens Type: WATER CLEAR; Color: HIGH EFFICIENCY RED;
150060VS75000
150060VS75000 by Wurth Elektronik is a single color LED with peak wavelength of 572nm and viewing angle of 140°. Ideal for applications requiring bright green light, it has a max forward current of 0.03A and operates b/w -40°C to 85°C. Suitable for surface mount installations in various electronic devices.
HLMP-1700-B00A2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SML-D12M8WT86P
ROHM
ROHM's SML-D12M8WT86P is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting YELLOWISH GREEN light at 25.0mcd luminous intensity. Ideal for surface mount applications in electronics due to its small size and milky white lens.
555-3008F
Dialight
Dialight's 555-3008F is a 2mm single color LED with built-in resistor. It has a peak wavelength of 650nm, forward current of 0.0038A, and operates b/w -55 to 100°C. Ideal for applications requiring red diffused light emission in compact spaces.
APT1608SRCPRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
LTST-C193TGKT-5A
Lite-on Technology
LTST-C193TGKT-5A by Lite-on Technology is a single color LED with peak wavelength of 525nm. It has a max forward current of 0.02A and viewing angle of 130°. Ideal for surface mount applications, it emits green light with luminous intensity of 154.0mcd.
HLMP-1503-D0002
Broadcom's HLMP-1503-D0002 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.03A, it emits high performance green light at 6.15mcd luminous intensity. Ideal for applications requiring radial mounting and a viewing angle of 60°, such as indicator lights in electronic devices.
598-8170-107F
Dialight's 598-8170-107F is a single color LED with a water-clear lens, emitting green light. With a size of 1.2mm and max forward current of 0.025A, it's ideal for surface mount applications requiring a viewing angle of 140° and luminous intensity of 20.0mcd.
LTL-4231NLC
LTL-4231NLC by Lite-on Technology is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.007A and operates b/w -55 to 100°C. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
SML-D15MWT86
ROHM's SML-D15MWT86 is a 1.2mm SINGLE COLOR LED with 0.035A max forward current and 71.0mcd nominal luminous intensity. Ideal for surface mount applications, it emits YELLOWISH GREEN light at -40 to 100°C, making it suitable for various visible LED lighting projects.
MLCAWT-P1-0000-000XE5
Wolfspeed
Wolfspeed's MLCAWT-P1-0000-000XE5 is a single-color LED with max forward current of 0.35A, forward voltage of 3.4V, and reverse voltage of 5V. At a height of 1.2mm, it emits white light at wavelength for applications in visible LEDs requiring min luminous intensity of 120cd at max operating temp of 150°C.
QTLP650C24TR
Fairchild Semiconductor
Fairchild Semiconductor's QTLP650C24TR LED has a max forward current of 0.03A and water-clear lens type. With a max operating temp of 85°C, it emits green/orange-red light at 140° viewing angle. Ideal for applications requiring low power consumption and vibrant lighting in various environments.
SML-D12M8WT86M
ROHM SML-D12M8WT86M is a 1.2mm SINGLE COLOR LED with milky white lens emitting YELLOWISH GREEN light at 25.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 85°C, suitable for surface mount applications in various electronic devices.
150-22
Sloanled
Visible LEDs;
150352M173300
TRIPLE COLOR LED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SML-LX2832SIC-TR
Lumex
SML-LX2832SIC-TR by Lumex is a 2.4mm SINGLE COLOR LED with peak wavelength of 636nm and max forward current of 0.03A. Ideal for applications requiring a WATER CLEAR lens, it has a viewing angle of 120° and nominal luminous intensity of 250.0mcd. Suitable for surface mounting, it operates b/w -30 to 85 °C, making it perfect for red/orange-red color displays.
SML-LXL1209SIC-TR
The Lumex SML-LXL1209SIC-TR is a 1.8mm WATER CLEAR LED with peak wavelength of 636nm and luminous intensity of 600.0mcd. Ideal for surface mount applications, it operates b/w -30 to 85°C, drawing 0.03A current.
SML-LXL1206GC-TR
SML-LXL1206GC-TR by Lumex is a 1.1mm GREEN LED with peak wavelength of 565nm, forward current of 0.025A, and luminous intensity of 20.0mcd. Ideal for surface mount applications in electronics due to its water clear lens and single color configuration.
SML-LX0805SRC-TR
SML-LX0805SRC-TR by Lumex is a 1.4mm SINGLE COLOR LED with peak wavelength of 660nm, forward current of 0.025A, and luminous intensity of 25.0mcd. Ideal for surface mount applications in products requiring super red light emission at a wide viewing angle of 140°.
SML-LX0603GW-TR
SML-LX0603GW-TR by Lumex is a 1mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.025A and viewing angle of 160°. Ideal for surface mount applications, this green LED operates b/w -25 to 85 °C, making it suitable for various lighting projects.
SML-LXR44SRC-TR
SML-LXR44SRC-TR by Lumex is a 2.4mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring a clear lens SUPER RED light source, such as indicator lights in electronic devices due to its surface mounting feature and 90° viewing angle.
SML-LX1610RGBW/A
The Lumex SML-LX1610RGBW/A is a COMMON ANODE, 3 ELEMENTS LED with 0.3A max current and 625/525/470nm peak wavelengths. Ideal for TRIPLE COLOR illumination in applications like signage, displays, and indicators. Features WATER CLEAR lens, 110° viewing angle, and SURFACE mounting.
SML-LXR44SUGC-TR
SML-LXR44SUGC-TR by Lumex is a 2.4mm round, single color LED with a peak wavelength of 574nm and a max forward current of 0.025A. It has a clear lens and a viewing angle of 90°. This surface mount LED is commonly used in applications that require super ultra green illumination.
SML-LX0404SIUPGUSB
The Lumex SML-LX0404SIUPGUSB is a 1mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 632/518/465nm. It has a max forward current of 0.03A and viewing angle of 120°, making it ideal for applications requiring RGB illumination in compact spaces. With a water clear lens and surface mounting feature, this LED operates b/w -40 to 85°C temperatures.
SML-LX0603SRW-TR
SML-LX0603SRW-TR by Lumex is a 1mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.02A and viewing angle of 120°. Ideal for surface mount applications, it emits red light with luminous intensity of 15.0mcd.
SML-LX15IGC-RP-TR
SML-LX15IGC-RP-TR by Lumex is a 3mm dual-color LED with common cathode configuration. It has a max forward current of 0.03A and peak wavelengths of 635nm/565nm, suitable for surface mount applications in visible LED displays.
SML-LXR44GC-TR
SML-LXR44GC-TR by Lumex is a 2.4mm GREEN LED with max forward current of 0.025A, peak wavelength of 565nm, and viewing angle of 120°. Ideal for surface mount applications in electronics due to its water clear lens and nominal luminous intensity of 30mcd at a max forward voltage of 2.5V.
SML-LXT0805GW-TR
SML-LXT0805GW-TR by Lumex is a single color LED with a peak wavelength of 565nm and a max forward current of 0.03A. It is commonly used in applications such as surface mount lighting due to its diffused milky white lens and green color at wavelength.
SML-LXL1209UPGC-TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1000.0; Lens Type: CLEAR; Configuration: SINGLE;
SML-LXR851SOC-TR
SML-LXR851SOC-TR by Lumex is a 2mm single color LED with peak wavelength of 610nm. It has a max forward current of 0.03A and viewing angle of 160°. Ideal for surface mount applications, this LED is commonly used in visible light displays and indicator lights due to its super orange color and clear lens type.
SML-LX23SUGC-TR
SML-LX23SUGC-TR by Lumex is a 2mm single color LED with peak wavelength of 574nm. It has a max forward current of 0.025A and viewing angle of 90°. Ideal for surface mount applications in electronics, displays, and indicators due to its super ultra green color and clear lens type.
SML-LX0402SUGC-TR
The Lumex SML-LX0402SUGC-TR is a 0.8mm SINGLE COLOR LED with peak wavelength of 574nm. It has a max forward current of 0.025A and viewing angle of 120°. Ideal for surface mount applications, it emits green light and operates b/w -40 to 85 °C.
SML-LX15IC-RP-TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 10.0; Lens Type: WATER CLEAR; Viewing Angle: 140 deg;
SML-LXT0805IW-TR
The Lumex SML-LXT0805IW-TR is a 1.4mm SINGLE COLOR LED with peak wavelength of 635nm, emitting RED light at 11.0mcd intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -25°C to 80°C temperature range.
SML-LX0402SIC-TR
The Lumex SML-LX0402SIC-TR is a 0.8mm SINGLE COLOR LED with peak wavelength of 636nm, forward current of 0.03A, and luminous intensity of 140.0mcd. Ideal for surface mount applications requiring an orange-red light source with a viewing angle of 120°.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved